Modified g-C3N4 derived from ionic liquid and urea for promoting visible-light photodegradation of organic pollutants

In this work, modified g-C₃N₄ was fabricated successfully by calcination of ionic liquid (IL) and urea. The addition of IL changed the polymerization mode of urea, induced the self-assembly of urea molecules, modified the morphological structure of the tightly packed g-C₃N₄, and extended the electron conjugation system. When using 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) as a modifier, the heteroatom Cl could be inserted into the g-C₃N₄ to optimize the electronic structure. The results of characterizations indicate that the unique structure of modified g-C₃N₄ has an expanded electron delocalization range, introduces an interlayer charge transmission channel, promotes the charge transmission, reduces the band gap, enhances the absorption of visible light, and inhibits electron-hole recombination. Modified g-C₃N₄ showed excellent photocatalytic performance for the degradation of rhodamine B and tetracycline. Furthermore, the effect of different anions in 1-butyl-3-methylimidazolium salts ([Bmim]Cl, [Bmim]Br, [Bmim][BF₄], and [Bmim][PF₆]) on the structure and function of g-C₃N₄ are discussed.     

Characterization of wet microalgal cells pretreated with steam for lipid extraction

Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

STUDY OF MECHANISM OF RQ EMBRITTLEMENT OF Fe_(73.5)Cu_1-Nb_3Si_(13.5)B_9 NANOCRYSTALLINE SOFT MAGNETIC ALLOY

Rapidly quenching embrittlement (RQE) sometimes appears in Fe73.5Cu1Nb3Si13.5B9 nanocrystalline soft magnetic alloy (FINEMET) during production process. As a re-sult of RQE the ductility of the as-quenched ribbon drops seriously. The mechanism of RQE has been elucidated in the recent works of current authors. It was believed that RQE is due to the structural relaxation but not related to a-Fe(Si) crystallization. In this paper, the high resolution TEM (HRTEM) method and image digital processing were applied to analyze the HRTEM images of two FINEMET rapidly quenched ribbons with different thicknesses in detail. In the thinner ductile sample, the ordering domains with the size of about 3nm are observed. In the thicker RQE sample, the metastable nanocrystalline domains with the size of 18nm are observed along with the structural relaxation. These domains seem to have Fe3B-like metastable phase struc-ture on nanometer scale. The result indicates that the local atomic ordering regions extend when RQE induced     

IN-SITU OBSERVATION OF CRACK TIP DEFORMATION IN A DUPLEX STAINLESS STEEL

The development of dislocation structures in the plastic zone ahead of a crack tip has been in-vestigated in a duplex stainless steel during in-situ deformation experiments in a scanningtransmission electron microscope.It was found that the dislocation distribution wassignificantly different in the ferrite and in the austenite.In the ferrite grains,the dislocationsemitted by the crack tip may cross-slip out of the original slip planes and form a broad plasticzone.However,in the austenite,the dislocation free zone is small and the dislocations emittedby the crack pile up in its slip plane.The selection of slip systems at the crack tip depends onthe crack tip Schmid factors in both phases.But after large deformation,the selection of thesecond slip systems at the craek tip in austenite does not depend on the Schmid factors.     

LOCALIZED CORROSION OF MICROCRYSTALS OF 1Crl8Ni9Ti STAINLESS STEEL

The resistances against localized corrosion of 1Cr18Ni9Ti microcrystals with normal grainsize and bcc structure obtained hy magnetron sputtering have been compared.The two kindsof microcrystals with (110) and (211) textures respectively were obtained under differentsputtering conditions.Both microcrystals were found to have better resistance against local-ized corrosion than the crystal with normal grain.The microcrystal with (110) preferredorientation has larger resistance to localized corrosion than that with (211) preferredorientation.     

TEMPERATURE DEPENDENCE UPON VISCOSITY OF Ni-P ALLOY ON AMORPHOUS FORMATION

The viscous flow of amorphous alloys near T_gis closely related to the viscosity of liquid alloys.On the basis of the measured surface tension and density for Ni-P binary alloys,the correla-tion between the viscosity of the melt and viscous flow process of the amorphous alloy is inves-tigated.The relationship between viscosity and temperature for Ni-P alloys going from liquidto amorphous solid may be described by the following formula:     

SiC FIBER／ALUMINIUM PREFORM WIRES FABRICATEDBY ULTRASONIC LIQUID INFILTRATION PROCESS

ＳｉＣＦＩＢＥＲ／ＡＬＵＭＩＮＩＵＭＰＲＥＦＯＲＭＷＩＲＥＳＦＡＢＲＩＣＡＴＥＤＢＹＵＬＴＲＡＳＯＮＩＣＬＩＱＵＩＤＩＮＦＩＬＴＲＡＴＩＯＮＰＲＯＣＥＳＳＺｈａｎｇＣｈｅｎｇｅ；ＷａｎｇＬｉｎｇｓｅｎ（ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆ...     

KINETICS OF LIQUID PENETRATING INTO GRAIN BOUNDARY

ＫＩＮＥＴＩＣＳＯＦＬＩＱＵＩＤＰＥＮＥＴＲＡＴＩＮＧＩＮＴＯＧＲＡＩＮＢＯＵＮＤＡＲＹ￥Ｃｈｅｎ，Ｋａｎｇｈｕａ；Ｈｕａｎｇ，Ｂａｉｙｕｎ（ＰｏｗｄｅｒＭｅｔａｌｌｕｒｇｙＲｅｓｅａｒｃｈｉｎｓｔｉｔｕｔｅ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉ...     

A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.