Fabrication of Metallic Magnetic Calorimeter X-ray Detector Arrays

Microcalorimeters with metallic magnetic sensors show great promise for use in astronomical X-ray spectroscopy. We describe the design and fabrication of a lithographically patterned magnetic microcalorimeter. A paramagnetic AuEr film is sputter-deposited as the sensor, which is coupled to a low noise SQUID via a meander superconducting pickup loop used as an inductor. This inductor also provides the magnetic field bias to the sensor. The AuEr film is deposited over this meander such that the field created by a large current flowing in the loop magnetizes the sensor material. The use of thin film techniques in the fabrication of these magnetic sensors not only allows strong magnetic coupling between the sensor and the inductor, it also is scalable for array fabrication.      

Quantitative characterization of nanoparticles in blood by transmission electron microscopy with a window-type microchip nanopipet

Transmission electron microscopy (TEM) is a unique and powerful tool for observation of nanoparticles. However, due to the uneven spatial distribution of particles conventionally dried on copper grids, TEM is rarely employed to evaluate the spatial distribution of nanoparticles in aqueous solutions. Here, we present a microchip nanopipet with a narrow chamber width for sorting nanoparticles from blood and preventing the aggregation of the particles during the drying process, enabling quantitative analysis of their aggregation/agglomeration states and the particle concentration in aqueous solutions. This microchip is adaptable to all commercial TEM holders. Such a nanopipet proves to be a simple and convenient sampling device for TEM image-based quantitative characterization.     

Effect of Green States on Sintering Behavior and Microstructural Evolution of High-Purity Barium Titanate

Compacts prepared from three differently agglomerated powders were studied. Hg-penetration results and SEM observations were employed to compare the uniformity of powder compacts and to investigate the pore-size evolution and the microstructural development during sintering. It was found that the more nonuniform the powder compact, the higher the degree of pore growth in the initial and at the beginning of intermediate stages of sintering. Moreover, a higher sintering temperature and a nonuniform microstructure with larger grains could not be avoided. Microstresses might develop because of the differential shrinkage, but they would be released thereafter via the change of grain morphology. It was observed that the aggregate and pore-boundary separation might not be the primary reason for the initiation of discontinuous grain growth.     

A frequency‐locked position servo control system by microprocessor‐based slope‐varied technique

Abstract

A microprocessor‐based slope‐varied frequency‐pumped controller (μP‐SVFPC) for improving the locking performance of the frequency‐locked position servo control system (FLPS) is presented. The presented slope‐varied pump technique is to perform the position control process fast for a long distance servo, while nearly similar acquisition times for different distance servos are obtained during the servo range. The motion profiles for system locking are adaptively generated according to the coming frequency error. No motion profiles are required to be pre‐installed in the controller. A prototype of μP‐FLPS is realized, simulated, and tested. Computer simulation and experimental result confirm that the system acquisition times of μP‐FLPS for short, middle, and long distance servos are nearly similar to each other. In comparison with the basic FLPS system, the acquisition times of the presented μP‐FLPS for the middle and long distance servos are improved by about 58% and 85%, respectively.     

Static error budget analysis for a land-based dual-camera mobile mapping system

A mobile mapping system (MMS) is developed based on a direct sensor orientation technique that integrates GPS/inertial measurement unit (IMU) and digital cameras. This system is capable of directly mapping geospatial information without the requirement of ground control. In this article, an MMS composed of two digital single-lens reflex cameras and an Applanix POS AV-510^© is described. There are several systematic errors that need to be calibrated before achieving the goal of direct georeferencing. These are related to lens distortion, the lever-arm between the GPS and the camera's perspective center, and the boresight misalignment angles between the IMU and the camera frame. Experimental results show that the calibration field is the major error source. However, with the designed system, we can achieve a maximum three-dimensional positioning error of less than 18.27 and 7.74?cm at distances 20?m using a single camera with parallel imaging and dual-cameras with convergent imaging, respectively. The results demonstrate that the potential of high-accuracy land-based MMS applications is promising.     

Influence of pretilt angle on disclination lines of liquid crystal lens

This article investigates the effect of pretilt angle on disclination lines of liquid crystal (LC) lenses. When the pretilt angle of LCs is higher than 7°, the disclination lines are reduced and are moved to the boundary of the LC lens. The disclination lines at the boundary do not influence the focused beam profile of the LC lens. As the pretilt angle of LCs further increases, the disclination lines at the boundary become almost invisible. However, the interference rings become asymmetrical. The response time of an LC lens with a pretilt angle higher than 7° is ～60% of the conventionally homogeneous LC lens. This value is a result of the decrease in the rotation angle of the LCs and the reduced disclination lines.     

Automatic disulfide bond assignment using a1 ion screening by mass spectrometry for structural characterization of protein pharmaceuticals

An automatic method for disulfide bond assignment using dimethyl labeling and computational screening of a(1) ions with customized software, RADAR, is developed. By utilization of the enhanced a(1) ions generated from labeled peptides, the N-terminal amino acids from disulfide-linked peptides can be determined. In this study, we applied this method for structural characterization of recombinant monoclonal antibodies, an important group of therapeutic proteins. In addition to a(1) ion screening and molecular weight match, new RADAR is capable of confirming the matched peptide pairs by further comparing the collision-induced dissociation (CID) fragment ions. With the N-terminal amino acid identities as a threshold, the identification of disulfide-linked peptide pairs can be achieved rapidly at a higher confidence level. Unlike most current approaches, prior knowledge of disulfide linkages or a high-end mass spectrometer is not required, and tedious work or deliberate interpretation can be avoided in this study. Our approach makes it possible to analyze unknown disulfide bonds of protein pharmaceuticals as well as their degraded forms without further protein separation. It can be used as a convenient quality examination tool during biopharmaceutical development and manufacturing processes.     

Graphene sheets anchored with ZnO nanocrystals as electrode materials for electrochemical capacitors

An efficient approach consisted of modified Hummers' method, pulse microwave heating, and homogenizing dispersion has been demonstrated to prepare ZnO/graphene hybrid as electrode material for electrochemical capacitors (ECs). Highly-crystalline ZnO nanoparticles are anchored with graphene sheets, forming three-dimensional framework. The electrochemical properties of ZnO/graphene hybrids are characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge cycling. The EC equipped with ZnO/graphite hybrid (1:5 in w/w) exhibit the improved performance in terms of specific capacitance, high rate capability, and excellent cycling stability, as compared with blank graphene electrode. The maximum energy and power densities of ZnO/graphite capacitor can be obtained as high as 66 Wh kg⁻¹ and 15.2 kW kg⁻¹, respectively. The improved performance can be ascribed to the insertion of ZnO nanocrystals between individual graphite sheets, creating a conducting framework that provides more active sites for the formation of electric double layer. The unique framework allows the electrolyte ions to diffuse easily into the interior channels, leading to small inner resistance.     

Limits of recognition for simple vapor mixtures determined with a microsensor array

The "limit of recognition" (LOR) has been defined as the minimum concentration at which reliable individual vapor recognition can be achieved with a multisensor array, and methodology for determining the LORs of individual vapors probabilistically on the basis of sensor array response patterns has been reported. This article explores the problems of defining and evaluating LORs for vapor mixtures in terms of the absolute and relative component vapor concentrations, where the mixture must be discriminated from those component vapors and from the subset of possible lower-order component mixtures. Monte Carlo simulations and principal components regression analyses of an extant database of calibrated responses to a set of 16 vapors from an array of 6 diverse polymer-coated surface acoustic wave sensors are used to illustrate the approach and to examine trends in LOR values among the 120 possible binary mixtures and 560 possible ternary mixtures in the data set. At concentrations exceeding the LOD, 89% of the binary mixtures could be reliably recognized (<5% error) over some composite concentration range, while only 3% of the ternary mixtures could be recognized. Most binary mixtures could be recognized only if the constituent vapor relative concentration ratio, defined in terms of multiples of the LOD for each vapor, was < or =20. Correlations with the Euclidean distance(s) separating the normalized constituent vapor response vectors allow reasonably accurate predictions of the limiting recognizable mixture composition ranges for binary and ternary cases. Results are considered in the context of using microsensor arrays for vapor detection and recognition in microanalytical systems.     

Effects of nano-surface properties on initial osteoblast adhesion and Ca/P adsorption ability for titanium alloys

Titanium alloys (Ti6Al4V), while subjected to high temperature surface treatment, experience altered nano-surface characteristics. The effects of such surface treatments are examined, including the initial adhesion force experienced by osteoblasts, the Ca/P adsorption capability, and the nano-surface properties, including the amounts of amphoteric Ti-OH groups, surface topography, and surface roughness. The initial adhesion force is considered a quantitative indicator of cyto-compatibility in?vitro. Previously, a cyto-detacher was applied in a pioneer attempt measuring the initial adhesion force of fibroblasts on a metal surface. Presently, the cyto-detacher is further applied to evaluate the initial adhesion force of osteoblasts. Results reveal that (1)?titanium alloys subjected to heat treatment could promote the adsorption capability of Ca and P; (2)?titanium alloys subjected to heat treatment could have higher initial osteoblast adhesion forces; (3)?the adhesion strength of osteoblasts, ranging from 38.5 to 58.9?nN (nanonewtons), appears stronger for rougher surfaces. It is concluded that the heat treatment could have impacted the biocompatibility in terms of the initial osteoblast adhesion force and Ca/P adsorption capability.