谈现代小说中人力车夫形象

通过《一件小事》、《薄奠》和《骆驼祥子》三部作品中的比较分析,从“人力车夫”这一都市劳动人民的主人公形象,我们可以看到其工人阶级的友爱精神和高尚品质,同时,要清醒认识到在旧制度下劳动者的悲剧命运是无法避免的。     

Three-dimensional porous composite framework assembled withCuO microspheres as anode current collector for lithium-ionbatteries

The surface structure and material composition of current collectors have significant effects on the electrochemical performances of lithium-ion batteries(LIBs). In this work, a three-dimensional(3D) porous composite framework is applied as the anode current collector in LIBs. This unique 3D skeleton is composed of conductive carbon fiber/Cu core/shell fibrous structure. With an oxidation treatment upon the copper shell, the porous framework is assembled with CuO microspheres. Using mesocarbon microbead(MCMB) graphite powders as the active material, the cell with this 3D porous composite current collector shows an improved reversible discharge-charge capacity of 415 mAh g~(–1) at a current rate of 0.1 C after 50 cycles, which is much higher than that of the cell with a flat Cu foil(127 mAh g~(–1)). It is demonstrated that this unique fibrous network of the 3D current collector coupled with the morphological effects of the CuO microspheres greatly improve the cell performance in terms of electrical conductivity, reversible capacity and cycling stability.     

Experimental investigation and numerical simulation of large-sized aluminum tube extrusion forming

Large-sized aluminum tube has big section effect, aspect ratio and thin thickness, so that the extrusion technology is complex and the large specific pressure is generated in extrusion cavity. The temperature variation and velocity effect is difficult to control. The extrusion forming of large-sized aluminum tube was researched and simulated. Three-dimensional thermo-mechanical coupled finite element model was constructed and appropriate boundary conditions were given out. The results show that large-sized aluminum tube can be formed by isothermal extrusion through controlling the extrusion velocity and founding the relationship between extrusion velocity and extrusion temperature.     

废树脂苯乙烯固化研究(Ⅱ)

本文研究废离子交换树脂苯乙烯固化的工艺条件和固化产品性能鉴定。该法能包容62％(W)废树脂。固化产品均匀、坚韧、抗压强度239kg/cm~2。在去离子水中浸泡120d,浸出率对于~(137)Cs为10~(-6)cm/d,对于~(60)Co和~(85)Sr为10~(-7)-10~(-8)cm/d。长期水浸不溶胀。承受辐照剂量>10~8rad。闪点270℃,燃点290℃左右。加热到450℃不自燃,DTA曲线上235℃前无放热峰。     

生成长寿命放射性核的（n，γ）截面测量

生成长寿命放射性核的（ｎ，γ）截面测量夏宜君，龙先灌，王春浩，杨志华，罗小兵杨经福，刘漫天，彭秀峰，何福庆（四川大学原子核科学技术研究所，成都，６１００６４）卢涵林（中国原子能科学研究院，北京，１０２４１３）低放射性水平作为聚变堆发展的重要目标，对聚...     

嵌入式数据库SQLite在核仪器数据管理中的应用

针对核仪器中采用文件方式管理二进制谱线数据块时操作繁杂、格式不一、升级困难等问题,本项目通过嵌入体积小、速度快、稳定可靠的SQLite数据库,采用BLOB类型存储二进制谱线数据块,利用事务传输批量数据,提高了谱线数据管理性能与安全性。根据谱线数据管理要求,设计实用的谱线数据管理系统,验证SQLite数据库在核仪器数据管理中高效、便捷、可靠等优势。     

大型冶金成套设备合作制造模式的现状分析与改进方案

根据我国大型钢铁企业"十五"、"十一五"期间从国外引进了大批先进的冶金技术和成套设备,其中国内有加工能力的重要设备均采用"联合设计、合作制造"的引进方式。结合武钢最近十几年来引进设备的实践经验,对传统合作制造模式在实际操作过程中出现的各种利弊通过实例进行详细分析研究,分析研究的结果为弊大于利,并研究提出了一种改进型的合作制造模式,经过试用效果良好,值得在冶金及其它行业企业的设备采购系统推广应用。     

交通灯控制系统中黄灯时间的确定

介绍了电灯的由来,探讨了黄灯时间的长短对交通安全正负两方面的影,在应用力学和运动学原理的基础上,提出了一种计算黄灯时间的模型.分析了模型建立的全部过程,最后列出了黄灯时间的求解公式.     

Delphi环境下基于UDP的聊天程序

利用UDP协议实现局域网内点到点通信。     

浇注型耐热聚氨酯树脂材料的合成及性能

以二异氰酸酯(4,4’-二苯甲烷二异氰酸酯MDI;4,4’-二环己基甲烷二异氰酸酯Hl2MDI),聚醚多元醇(PPG),小分子交联扩链剂,催化剂及助剂合成了一系列耐热聚氨酯树脂材料。用FT-IR表征了结构,用X射线衍射分析了微观结构,用DSC,TGA对其热稳定性进行了分析测试,对力学性能也进行了测试。结果表明,合成的聚氨酯材料具有高耐热性和卓越的力学性能。