Electrorheological properties of kaolinite,polyindole, and polyindole/kaolinite composite suspensions

In this study, polyindole (PIN) and polyindole/kaolinite (PIN/KAO) composite were synthesized by free radical polymerization using FeCl₃ as an initiator. Average particle sizes (d₅₀) of PIN and PIN/KAO composite were determined by dynamic light scattering (DLS) as 7.2 and 6.2 μm, respectively. The samples were characterized by FTIR, elemental analysis, DSC/TGA and SEM measurements. Suspensions of KAO, PIN, and PIN/KAO composite were prepared in silicone oil (SO) and the sedimentation stabilities were determined. Electrorheological (ER) properties of these suspensions were studied as a function of dispersed phase concentration, shear rate, shear stress, and temperature; and yield stresses and excess shear stresses determined. Further, dielectric properties of KAO, PIN, and PIN/KAO composite were investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis, characterization, and cyclopolymerization of a functional non-symmetric divinyl monomer

A non-symmetric divinyl monomer with terminal carboxylic acid functionality was readily synthesized from the reaction of ethyl α-hydroxymethylacrylate (EHMA) with maleic anhydride. The new monomer (EHMA-MA) was homopolymerized in both bulk and ethyl acetate using AIBN as an initiator to give cyclopolymers. The synthesis of the monomer and cyclopolymers were followed by ¹³C NMR, ¹H NMR, and FTIR. ¹H NMR was also utilized to obtain the degree of cyclization of the polymers, which were found to be 95% or higher in all cases. The molecular weights of the cyclopolymers were around 40-60,000 g/mol as estimated by SEC. The cyclopolymers were thermally stable up to 150 °C. Although the cyclopolymers obtained were not water-soluble; they were soluble in aqueous 1 M NaOH solution. In addition to the carboxylic acid functionality present, the cyclopolymers also had an ethyl ester and a lactone moiety. These functional groups were reacted with hexylamine to obtain a polymer with imide and amide moieties.     

Surface Characterization of Mild Steel During Atmospheric Corrosion After Being Treated by Sodium Dihydrogen Orthophosphate

Protection of Metals and Physical Chemistry of Surfaces - The objective of this study was to characterize the surfaces of the steel products produced locally during their exposure to the industrial...     

Electrospun nylon 6,6 nanofibers functionalized with cyclodextrins for removal of toluene vapor

Functional nylon 6,6 nanofibers incorporating cyclodextrins (CD) were developed via electrospinning. Enhanced thermal stability of the nylon 6,6/CD nanofibers was observed due to interaction between CD and nylon 6,6. X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy studies indicated the existence of some CD molecules on the surface of the nanofibers. Electrospun nylon 6,6 nanofibers without having CD were ineffective for entrapment of toluene vapor from the environment, whereas nylon 6,6/CD nanofibrous membranes can effectively entrap toluene vapor from the surrounding by taking advantage of the high surface‐volume ratio of nanofibers with the added advantage of inclusion complexation capability of CD presenting on the nanofiber surface. The modeling studies for formation of inclusion complex between CD and toluene were also performed by using ab initio techniques. Our results suggest that nylon 6,6/CD nanofibrous membranes may have potential to be used as air filters for the removal of organic vapor waste from surroundings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41941.     

Erbium(III)‐doped polyurethaneureas: Novel broadband ultraviolet‐to‐visible converters

Novel, polymeric UV‐to‐visible converters were prepared by doping elastomeric poly(ether‐urethaneurea) copolymers with 5–25% by weight of ErCl₃ 6H₂O, corresponding to Er³⁺ concentrations of 2.19 to 10.86% by weight. When excited in the UV at 355 nm, the doped films generated a very broad, continuous visible luminescence between 400 and 750 nm. Preparation and spectroscopic characterization of the samples are discussed in detail. The color coordinates, color temperature, color rendering index of the samples, and the degree of overlap of their emission bands with the spectral response of the eye were determined. The color rendering index of samples is in the 57–70 range. The sample containing 2.19% by weight of Er³⁺ was found to give the color coordinates closest to the white‐source region and the highest color rendering index. The color temperatures of the samples were in the 5093–5540 K range. Overlap between the emission bands and the spectral response of the eye improved with increasing erbium concentration. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Osteosclerosis due to endemic fluorosis

Endemic water borne fluorosis is a public health problem in Isparta, a city located in southern Turkey. In order to investigate the association between osteosclerosis and fluorosis, we retrospectively screened the results of lumbar spine and femur neck bone mineral density (BMD) of 1500 patients who were examined before, for any reason in between 2001-2003. Sixty nine patients (67 females and 2 males, mean age 52.6+/-10.2) with vertebra T-scores>or=+2 were found only except a patient with osteoid osteoma in the femur neck (femur T-score+6.64). Thirty-four of the patients could be reexamined with lateral vertebra BMD and investigated for fluorosis and the other etiologic causes of osteosclerosis. Of 34 patients, 14 had either mottled tooth enamel or urine fluoride level greater than 1.5 mg/l. Other etiologic causes were hypothyroidism (2), hypoparathyroidism (1), history of lumbar fracture (1), use of retinoids (1), vitamin D (7), oral calcium preparations (9), and bisphosphanates (3). Lateral lumbar vertebral T-score was greater than+2 in 12 patients (35.3%). Femur T-score was greater than+2 in 7 patients (20.6%). Fourteen patients (41.2%) had lateral vertebral or femur T-score>or=+2. Five (35.7%) of these patients had signs of fluorosis, as discussed before. Mean body mass index of individuals with fluorosis was 36.4+/-7.9 and this result was significantly higher than other osteosclerotic subjects (31.6+/-4.4). In conclusion we believe that approximately one third of the osteosclerosis in our region was due to endemic skeletal fluorosis and obesity may enhance this osteosclerotic type bone changes in endemic fluorosis.     

Desulphiting dried apricots by exposure to hot air flow

Sulphited dried apricots were exposed to hot air flows at 40, 50 and 60 °C and the removal of SO₂ was investigated as their moisture content fell from an initial value of 193.2 g kg^?1 to a final value of 80–90 g kg^?1. A first‐order kinetic model was found for the removal of SO₂ between 40 and 60 °C. Temperature quotients (Q₁₀) for the removal of SO₂ were 2.84 between 40 and 50 °C and 4.93 between 50 and 60 °C; the activation energy (E_a) was 114.40 kJ mol^?1 between 40 and 60 °C. Analysis of the kinetic data also suggested a first‐order reaction for non‐enzymatic browning, with Q₁₀ values of 2.34 between 40 and 50 °C and 5.36 between 50 and 60 °C and an E_a value of 109.36 kJ mol^?1 between 40 and 60 °C. Exposure of dried apricots to a 60 °C air flow resulted in a rate constant for brown pigment formation that was 12 and 5 times higher than those at 40 and 50 °C respectively. © 2002 Society of Chemical Industry     

Laser Treatment of Sintered Silicon Carbide Surface for Enhanced Hydrophobicity

In this study, laser treatment of sintered SiC surfaces is carried out to enhance the surface hydrophobicity. Morphological and metallurgical changes of the treated surfaces are evaluated using optical and scanning electron microscopy, energy dispersive spectroscopy, and x-ray diffraction (XRD). Microhardness and fracture toughness are measured using indentation tests. The residual stresses present are determined using the XRD technique. The wetting characteristics of the treated surfaces are assessed through contact angle measurements. It is found that the laser-treated surfaces consist of fine grooves and pillars and that the resulting surface roughness enhances the surface hydrophobicity. The fracture toughness of the treated surface is reduced possibly because of the microhardness increase at the surface. The residual stress formed in the surface region is on the order of 1.8 GPa, and it is compressive.