Stability under vacuum of silicon trap detectors and their use as transfer instruments in cryogenic radiometry

The stability of the responsivity of trap detectors under vacuum has been studied by means of a special chamber designed for the test of photodetectors at low pressure. The first experiments at a wavelength of 647 nm show that the responsivity variations are smaller than the uncertainties of the measurements, approximately 3 parts in 10(5), when the detector operates successively in air, under vacuum, and then again in air. Calculations based on experiments with single windowless photodiodes indicate that the change in trap responsivity that is due to vacuum effects should be smaller than 1 part in 10(5), at least in the visible part of the wavelength range. This stability makes trap detectors suitable for cryogenic radiometry when one uses transfer detectors under vacuum.     

Comparison of experimental designs for simulation-based symbolic regression of manufacturing systems

In this article, an empirical analysis of experimental design approaches in simulation-based metamodelling of manufacturing systems with genetic programming (GP) is presented. An advantage of using GP is that prior assumptions on the structure of the metamodels are not required. On the other hand, having an unknown structure necessitates an analysis of the experimental design techniques used to sample the problem domain and capture its characteristics. Therefore, the study presents an empirical analysis of experimental design methods while developing GP metamodels to predict throughput rates in a common industrial system, serial production lines. The objective is to identify a robust sampling approach suitable for GP in simulation-based metamodelling. Experiments on different sizes of production lines are presented to demonstrate the effects of the experimental designs on the complexity and quality of approximations as well as their variance. The analysis showed that GP delivered system-wide metamodels with good predictive characteristics even with the limited sample data.     

An assessment of total RMR classification system using unified simulation model based on artificial neural networks

Engineering design has great importance in the cost and safety of engineering structures. Rock mass rating (RMR) system has become a reliable and widespread pre-design system for its ease of use and variety in engineering applications such as tunnels, foundations, and slopes. In RMR system, six parameters are employed in classifying a rock mass: uniaxial compressive strength of intact rock material (UCS), rock quality designation (RQD), spacing of discontinuities (SD), condition of discontinuities (CD), condition of groundwater (CG), and orientation of discontinuities (OD). The ratings of the first three parameters UCS, RQD, and SD are determined via graphic readings where the last three parameters CD, CG, and OD are estimated by the tables that are composed of interval valued linguistic expressions. Because of these linguistic expresions, the estimated rating values of the last three become fuzzy especially when the related conditions are close to border of any two classes. In such cases, these fuzzy situations could lead up incorrect rock class estimations. In this study, an empirical database based on the linguistic expressions for CD, CG, and OD is developed for training Artificial Neural Network (ANN) classifiers. The results obtained from graphical readings and ANN classifiers are unified in a simulation model (USM). The data obtained from five different tunnels, which were excavated for derivation purpose, are used to evaluate classification results of conventional method and proposed model. Finally, it is noted that more accurate and realistic ratings are reached by means of proposed model.     

Pitch angle control in wind turbines above the rated wind speed by multi-layer perceptron and radial basis function neural networks

In wind energy conversion systems, one of the operational problems is the changeability and discontinuity of wind. In most cases, wind speed can fluctuate rapidly. Hence, quality of produced energy becomes an important problem in wind energy conversion plants. Several control techniques have been applied to improve the quality of power generated from wind turbines. Pitch control is the most efficient and popular power control method, especially for variable-speed wind turbines. It is a useful method for power regulation above the rated wind speed. This paper proposes an artificial neural network-based pitch angle controller for wind turbines. In the simulations, a variable-speed wind turbine is modeled, and its operation is observed by using two types of artificial neural network controllers. These are multi-layer perceptrons with back propagation learning algorithm and radial basis function network. It is shown that the power output was successfully regulated during high wind speed, and as a result overloading or outage of the wind turbine was prevented.     

Contribution of laser microdissection-based technology to proteomic analysis in hepatocellular carcinoma developing on cirrhosis

Hepatocellular carcinoma (HCC) is a major cause of cancer worldwide. Proteomic studies provide opportunities to uncover targets for the diagnosis and treatment of this disease. However, in HCC developing in a setting of cirrhosis, the detection of proteome alterations may be hampered by the increased cellular heterogeneity of tissue when analysing global liver homogenates. The aim of this study was to evaluate whether the identification of proteome alterations in these HCC cases was improved when the differential protein profile between tumour and non-tumour areas of liver was determined using hepatocytes isolated by laser microdissection (LM). Differential profiles established with LM-hepatocytes and liver section homogenates using 2-DE and MS exhibited noticeable differences: 30% of the protein spots with deregulated expression in tumorous LM-samples did not display any modification in homogenates; conversely 15% of proteins altered in tumorous homogenates were not impaired in LM-hepatocytes. These alterations resulted from the presence in cirrhotic liver of fibrotic stroma which displayed a protein pattern different from that determined in LM-hepatocytes. In conclusion, our data demonstrate the interest of LM in distinguishing between fibrotic and hepatocyte proteome alterations and thus the benefit of LM to proteome studies of HCC developing in a context of cirrhosis.     

Neural computing models for prediction of permeability coefficient of coarse-grained soils

Correlations are very significant from the earliest days; in some cases, it is essential as it is difficult to measure the amount directly, and in other cases it is desirable to ascertain the results with other tests through correlations. Soft computing techniques are now being used as alternate statistical tool, and new techniques such as artificial neural networks, fuzzy inference systems, genetic algorithms, and their hybrids were employed for developing the predictive models to estimate the needed parameters, in the recent years. Determination of permeability coefficient (k) of soils is very important for the definition of hydraulic conductivity and is difficult, expensive, time-consuming, and involves destructive tests. In this paper, use of some soft computing techniques such as ANNs (MLP, RBF, etc.) and ANFIS (adaptive neuro-fuzzy inference system) for prediction of permeability of coarse-grained soils was described and compared. As a result of this paper, it was obtained that the all constructed soft computing models exhibited high performance for predicting k. In order to predict the permeability coefficient, ANN models having three inputs, one output were applied successfully and exhibited reliable predictions. However, all four different algorithms of ANN have almost the same prediction capability, and accuracy of MLP was relatively higher than RBF models. The ANFIS model for prediction of permeability coefficient revealed the most reliable prediction when compared with the ANN models, and the use of soft computing techniques will provide new approaches and methodologies in prediction of some parameters in soil mechanics.     

Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters

Medium carbon steel (AISI 1040) was one of the candidate materials for rock bolts to reinforce the borehole liners and emplacement drifts of the high-level nuclear waste repository in Yucca Mountain. The corrosion performance of this structural steel was investigated by techniques such as linear polarization, electrochemical impedance spectroscopy (EIS), and laboratory immersion tests in simulated ground waters. The corrosion rates of the steel were measured for the temperatures in the range from 25 °C to 85 °C, for the ionic concentrations of 1 time (1×), 10 times (10×), and a hundred times (100×) ground water concentration. The steel corroded uniformly at penetration rates of 35 to 200 μm/year in the deaerated waters, and at 200 to 1000 μm/year in the aerated waters. Increasing temperatures in the deaerated waters increased the corrosion rate of the steel. However, increasing ionic concentrations influenced the corrosion rate only slightly. In the aerated 1×and 10×waters, increasing temperatures increased the rates of the steel significantly. In the aerated 100×waters, the corrosion rate increased from 25 °C to 45 °C and decreased at higher temperatures (65 °C and up) due to the formation of oxide/hydroxide films and salt scales on the surface of the steel specimen. The steel suffered pitting corrosion in the both deaerated and aerated hot ground water environments after anodic polarization. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the. TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Wear behavior of as-deposited and oxidized ternary (Zr,Hf)N coatings

In the present study, the tribological performance of ternary (Zr,Hf)N coatings, whose Hf content was varied between 0 and 21 wt pct, has been systematically examined in the as-deposited and oxidized conditions. Coatings were applied on AISI D2 tool steel plates by arc physical vapor deposition (PVD). Oxidation was conducted at 400 °C for times up to 12 hours in air. Wear tests revealed pronounced improvement in the wear resistance with increasing Hf content in the as-deposited coatings. Oxidation for 12 hours yielded more than a fourfold increase in wear resistance. The beneficial effect of Hf on wear resistance decreased upon oxidation.     

Sliding wear behaviour of ZrN and (Zr, 12 wt% Hf)N coatings

In the present study, the sliding wear resistances of ZrN and (Zr, 12 wt% Hf)N coatings deposited on a hardened AISI D2 tool steel by arc-physical vapor deposition (PVD) technique were examined by a ball-on-disc wear tester. Alloying of ZrN coating with 12 wt% Hf did not change the hardness significantly, but achieved an improvement on adhesion strength and dry sliding wear resistance against steel (AISI 52100-55HRC) and Al₂O₃ balls.     

Layered precursors for new zeolitic materials: Synthesis and characterization of B-RUB-39 and its condensation product B-RUB-41

Condensation of layered silicate precursors leads to new, all silica zeolite frameworks. In order to introduce catalytic functionality, boron has been substituted into the silicate layer of RUB-39 in a single step synthesis process. Condensation of the silicate layer to the zeolite framework of RUB-41, RRO framework structure type, preserved B as constituent of the material. Analysis of structural details obtained from Rietveld analysis of powder diffraction data, ¹¹B and ²⁹Si NMR experiments of the as synthesized precursor as well as of the zeolite condensation product, and crystal chemical reasoning indicates segregation of B on one specific T-site. This T-site is buried in the silicate anionic layer of the precursor shielding the additional negative charge introduced by the trivalent T-atom.