Highly crystalline and oriented high‐strength poly(ethylene terephthalate) fibers by using low molecular weight polymer

High‐strength poly(ethylene terephthalate) (PET) fibers were obtained using low molecular weight (LMW) polymervia horizontal isothermal bath (hIB), followed by postdrawing process. We investigated the unique formations of different precursors, which differentiated in its molecular orientation and crystalline structures from traditional high‐speed spinning PET fibers. Sharp increase in crystallinity was observed after drawing process even though the fibers showed almost no any crystallinity before the drawing. Properties of as‐spun and drawn hIB and control filaments at different process conditions were compared. As would be expected, performances of resulted treated undrawn and drawn fibers have dramatically improved with developing unique morphologies. Tenacities more than 8 g/d for as‐spun and 10 g/d for drawn treated fibers after just drawn at 1.279 draw ratio were observed. These performances are considerably higher than that of control fibers. An explanation of structural development of high‐strength fibers using LMW polymer spun with hIB is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42747.     

Portable Infrared Spectrometer to Characterize and Differentiate Between Organic and Conventional Bovine Butter

The performance of a portable infrared system combined with pattern recognition to discriminate between organically and conventionally produced bovine butter samples as well as to predict the levels of conjugated linoleic acid (CLA) were evaluated. Sixty butter (27 organic and 33 conventional) samples were used in this study. Bovine butter–fat were applied onto an attenuated total reflectance infrared (ATR‐IR) accessory equipped with a five‐bounce ZnSe crystal set at 65 °C for spectral collection. In addition, ATR‐IR spectra of bovine butter were directly collected at room temperature to avoid phase separation. The fatty acid profile and the levels of CLA were determined using reference FAME‐GC‐FID analysis. SIMCA models showed well separated clusters that discriminated between organic and conventional bovine butters due to C=C trans bending out of the plane vibration modes band at 967 cm^?1. Additionally, strong PLSR models were developed to predict CLA levels using butter–fat and bovine butter spectra with SEP of 0.05 % and RPD of 4.7, indicating that the models are suitable for quality control applications. Portable IR technology offers the ability for “in situ” analysis of butters that is much less time consuming than current analytical practices for authentication and quality control efforts by the industry.     

Electrospun nylon 6,6 nanofibers functionalized with cyclodextrins for removal of toluene vapor

Functional nylon 6,6 nanofibers incorporating cyclodextrins (CD) were developed via electrospinning. Enhanced thermal stability of the nylon 6,6/CD nanofibers was observed due to interaction between CD and nylon 6,6. X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy studies indicated the existence of some CD molecules on the surface of the nanofibers. Electrospun nylon 6,6 nanofibers without having CD were ineffective for entrapment of toluene vapor from the environment, whereas nylon 6,6/CD nanofibrous membranes can effectively entrap toluene vapor from the surrounding by taking advantage of the high surface‐volume ratio of nanofibers with the added advantage of inclusion complexation capability of CD presenting on the nanofiber surface. The modeling studies for formation of inclusion complex between CD and toluene were also performed by using ab initio techniques. Our results suggest that nylon 6,6/CD nanofibrous membranes may have potential to be used as air filters for the removal of organic vapor waste from surroundings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41941.     

Hemocompatibility,cytotoxicity, and genotoxicity of poly(methylmethacrylate)/nanohydroxyapatite nanocomposites synthesized by melt blending method

The aim of this study was to show the hemocompatibility, cytotoxicity, and genotoxicity of nanocomposites that were synthesized with different molecular weights of poly(methyl methacrylate) (PMMA) and different concentrations of nanohydroxyapatite (nHAp). Different techniques to characterize the nanocomposites were used. The cytotoxicity and genotoxic effects of the polymers and nanocomposites on human lymphocytes were determined by acid phosphatase assay, viability test, and comet assay. Moreover, hemocompatibility test was performed. It was found that all of the PMMA/nHAp nanocomposites are highly hemocompatible and biocompatible, none of the nanocomposites showed a cytotoxic effect, and nHAp addition decreased the genotoxicity.     

Synthesis of Various Calix[4]arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr(VI) from Aqueous Solution

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17,23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]arene and 5,17-di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-di-hydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different parameters such as pH, shaking speed, and shaking time were examined toward dichromate ions. Results implied that all mercaptoalkyl-substituted calixarene derivatives showed an extraction capability toward dichromate anion while the carboxyl-functionalized calixarene-marcapto-alkyl derivative exhibited the highest extraction capability.     

The effect of borax pentahydrate addition to urea formaldehyde on the mechanical characteristics and free formaldehyde content of plywood

In this study, the effects of borax pentahydrate addition to urea formaldehyde (UF) on the bonding characteristics and free formaldehyde content have been studied. Experiments related to the bending strength, withdrawal shear strength and free formaldehyde content have been conducted on the three-layered beech and poplar plywood which are prepared by the addition of borax pentahydrate into their adhesive mixtures in certain amounts. Addition of borax pentahydrate into the adhesive mixture did not statistically affect the bending strength and withdrawal shear strength of the plywood but did reduce the free formaldehyde content.     

The Effects of Specimen Geometry on the Plastic Deformation of AA 2219-T8 Aluminum Alloy Under Dynamic Impact Loading

The effects of specimen geometry on shear strain localization in AA 2219-T8 aluminum alloy under dynamic impact loading were investigated. The alloy was machined into cylindrical, cuboidal and conical (frustum) test specimens. Both deformed and transformed adiabatic shear bands developed in the alloy during the impact loading. The critical strain rate for formation of the deformed band was determined to be 2500 s^?1 irrespective of the specimen geometry. The critical strain rate required for formation of transformed band is higher than 3000 s^?1 depending on the specimen geometry. The critical strain rate for formation of transformed bands is lowest (3000 s^?1) in the Ø5 mm × 5 mm cylindrical specimens and highest (> 6000 s^?1) in the conical specimens. The cylindrical specimens showed the greatest tendency to form transformed bands, whereas the conical specimen showed the least tendency. The shape of the shear bands on the impacted plane was also observed to be dependent on the specimen geometry. Whereas the shear bands on the compression plane of the conical specimens formed elongated cycles, two elliptical shaped shear bands facing each other were observed on the cylindrical specimens. Two parallel shear bands were observed on the compression planes of the cuboidal specimens. The dynamic stress–strain curves vary slightly with the specimen geometry. The cuboidal specimens exhibit higher tendency for strain hardening and higher maximum flow stress than the other specimens. The microstructure evolution leading to the formation of transformed bands is also discussed in this paper.