Comments on “Analytic Equation of State for Solid–Liquid–Vapor Phases” (Int. J. Thermophys. 24, 589 (2003))

Among the thermodynamic models applicable to solid–liquid–vapor phases, Yokozeki’s model is considered as the first repulsion-based analytic equation of state (EOS) in which a discontinuity is introduced in the isotherm. However, it was found that the model violates some physical constraints due to the empirically introduced discontinuity. This work focuses on the evaluation of the empirical basis of the model through scaled-particle theory (SPT) and a modification of the model to satisfy the physical constraint.     

Dieless drawing steel wires using a dielectric heating method and modeling the process dynamics

Modern industries require the production of multi-functional, inorganic, micron-sized metal wires. This study suggests a novel method that could potentially offer a highly efficient dieless drawing technology for manufacturing thin stainless steel fibers. The method is based on a hot-working principle, using microwaves as the heat source and SiC as the susceptor. Experimental trials with a laboratory rig showed that the new system worked effectively for drawing the stainless steel wires and should be able to realize the diameter attenuation with a diameter reduction of up to 21%. The theoretical model describing the deformation behavior of the stainless steel wires in the working zone along with the constitutive equation of Bingham model modified with a power law and Zener–Hollomon parameter turned out to match very good with the actual results of the experiment. The coefficient of variation of the drawn wire diameter increased, as the draw ratio increased, which could be attributed to the occurrence of the narrow necking zone.     

Effect of chloride ions on leaching rate of chalcopyrite

The effect of chloride on chalcopyrite leaching has been investigated by performing batch leaching tests with three kinds of leaching solutions and using Hiroyoshi’s model, which suggests that a zone of rapid leaching exists between the critical potential (E_c, equilibrium redox potential for the reduction of CuFeS₂ to Cu₂S) and the oxidation potential (E_ox, equilibrium redox potential for the oxidation of Cu₂S). The results of the leaching tests show that the leaching rate in hydrochloric acid solution is the fastest and that the relationship between the Cu leaching rate and oxidation–reduction potential (ORP) follows Hiroyoshi’s model. Thermodynamic calculations indicate that, with an increase in the chloride concentration, the concentration of cuprous ions increases as the chlorocuprate(I) complex ions are formed and the contribution of cuprous ions to the critical potential is greater than that of cupric ions, even though the concentration of cuprous ions is lower than that of cupric ions. This fact suggests that the formation of chlorocuprate(I) ions in a chloride solution may improve the chalcopyrite leaching rate by increasing the critical potential.     

Biological treatment of wastewater produced during recycling of spent lithium primary battery

Wastewater produced during recycling of spent lithium primary battery was biologically treated with Acidithiobacillus ferrooxidans to decrease the pH and metal concentration. Since the wastewater contains high concentrations of Cr, Ni, and Li, the effects of these metals on the bacterial activity in a 9 K medium were also investigated. Samples of the medium with different metal concentrations were treated, and the oxidation ratio of Fe²⁺ ions was measured to examine the activity of bacteria. In the treatment of simulated wastewater, the presence of Cr and Ni ions with concentrations of 8000 g m^?3 and 13,000 g m^?3, respectively, did not inhibit the bacterial activity, whereas the oxidation ratio of Fe²⁺ ions was observed to be low in the medium when Li ion was present with a concentration at 5000 g m^?3. This observation suggested that at this concentration, Li ion suppressed the bacterial activity. In the case of treatment of real wastewater containing Cr, Ni, and Li, the oxidation ratio of Fe²⁺ to Fe³⁺ was observed to be low while the Fe concentration and pH decreased to 21,633 g m^?3 and 1.8, respectively. Thus, the wastewater produced during the recycling of spent lithium primary batteries can be effectively treated biologically for re-circulating in the recycling process.     

Study of impact energy propagation phenomenon and modal characteristics of an armored vehicle undergoing high velocity impact

A new manufacturing technology is being employed to build a new type of armored vehicle. While thick panels are welded together in the old manufacturing technology, relatively thin panels are welded to a frame structure in the new manufacturing technology. The structural integrity of the new type of armor vehicles can be maintained mainly by the frame structures while the panel thickness is reduced significantly to reduce the total vehicle weight. Since the dynamic characteristics of a frame-panel hybrid structure are different from those of the old type of structure which consists of only thick panels, they should be identified to achieve a good performance of the vehicle. For this purpose, a proper FE model of the hybrid type of structure needs to be developed. In the present study, FE models are proposed to represent the frame-panel hybrid type structure efficiently. The impact energy propagation, the transient response and the modal characteristics are investigated with the FE models. This paper was presented at the 4th Asian Conference on Multibody Dynamics(ACMD2008), Jeju, Korea, August 20–23, 2008. Hong-Hee Yoo received a B.S. and M.S. degree in Mechanical Engineering from Seoul National University in 1980 and 1982. He then went on to receive his Ph.D. degree from Michigan State University in 1989. Dr. Yoo is currently a Professor at the School of Mechanical Engineering at Hanyang University in Seoul, Korea. His research interests are in the area of Flexible body dynamics, vibration.     

Strengthening effects of sprayed fiber reinforced polymers on concrete

The objectives of this study were twofold. The first was to investigate the compressive and flexural behaviors of small‐sized concrete specimens strengthened with sprayed fiber reinforced polymer (SFRP), considering various fiber lengths, fiber volumes, and concrete strengths. The second was to evaluate the strengthening effects of SFRP on the flexural behaviors of large‐sized reinforced concrete beams. U‐shaped strips and shear keys were applied to the test specimens to improve the interfacial bond resistance between the concrete surface and SFRP. POLYM. COMPOS., 36:722–730, 2015. © 2014 Society of Plastics Engineers     

Production and Characterization of Branched Oligosaccharides from Liquefied Starch by the Action of B. Licheniformis Amylase

A branched oligosaccharides (BOS) mixture was produced from liquefied starch solution using a maltogenic amylase of Bacillus licheniformis (BLMA). The BOS mixture was produced by both α-1,4-bond hydrolyzing and α-1,6-transglycosylation activities of BLMA, and it contained 58.3% of various branched oligosaccharides. Small branched oligosaccharides such as isomaltose, isopanose, and panose were identified in the mixture by various analyses including high performance ion-chromatography (HPIC). Major branched DP4 and DP5 molecules in the mixture were determined as 6²-O-α-maltosylmaltose, 6³-O-α-maltosyl-maltotriose and 6²-O-α-maltotriosyl-maltose, respectively. Time course study of BOS production suggested that the hydrolysis and transglycosylation reactions catalyzed by BLMA were coupled. BLMA was likely to transfer a sugar moiety hydrolyzed from a non-reducing end of maltooligosaccharide, mainly maltose, to another moiety of sugar via the formation of α-1,6-linkage. Immobilization of BLMA was attempted as an effort to achieve a continuous process for BOS production. the immobilized enzyme showed improved thermal stability and slight loss of enzyme activity was observed during repeated usage.     

Measurement of heat transfer coefficients for steam condensation on a vertical 21.5-mm-O.D. tube in the presence of air

ABSTRACT

Governing the rate of heat transport by condenser tubes in the passive containment cooling system (PCCS), the steam condensation over a vertical cylinder in the presence of air was investigated experimentally. The main objective of this study was to explore if the condensation heat transfer coefficient relies on the tube dimension, which has been a variable missed in most condensation models or has been embraced without experimental demonstration under phase change environments. The mean heat transfer coefficient was measured in the condensation test facility named JERICHO (JNU Experimental Rig for Investigation of Condensation Heat transfer On tube). The outer diameter of the condenser tube used in this study was set to 21.5 mm. The measured heat transfer coefficients were compared to those obtained from the 40-mm-O.D. tube, and a multiplier to correct the variation of the heat transfer coefficient with the tube diameter was proposed for its application to Lee correlation. The proposed correlation was further validated against another set of experimental data obtained from a separate test facility housing the 31.8-mm-O.D. tube.     

Environmental Phenol and Paraben Exposure Risks and Their Potential Influence on the Gene Expression Involved in the Prognosis of Prostate Cancer

Prostate cancer (PCa) is one of the leading malignant tumors in US men. The lack of understanding of the molecular pathology on the risk of food supply chain exposures of environmental phenol (EP) and paraben (PB) chemicals limits the prevention, diagnosis, and treatment options. This research aims to utilize a risk assessment approach to demonstrate the association of EP and PB exposures detected in the urine samples along with PCa in US men (NHANES data 2005–2015). Further, we employ integrated bioinformatics to examine how EP and PB exposure influences the molecular pathways associated with the progression of PCa. The odds ratio, multiple regression model, and Pearson coefficients were used to evaluate goodness-of-fit analyses. The results demonstrated associations of EPs, PBs, and their metabolites, qualitative and quantitative variables, with PCa. The genes responsive to EP and PB exposures were identified using the Comparative Toxicogenomic Database (CTD). DAVID.6.8, GO, and KEGG enrichment analyses were used to delineate their roles in prostate carcinogenesis. The plug-in CytoHubba and MCODE completed identification of the hub genes in Cytoscape software for their roles in the PCa prognosis. It was then validated by using the UALCAN database by evaluating the expression levels and predictive values of the identified hub genes in prostate cancer prognosis using TCGA data. We demonstrate a significant association of higher levels of EPs and PBs in the urine samples, categorical and numerical confounders, with self-reported PCa cases. The higher expression levels of the hub genes (BUB1B, TOP2A, UBE2C, RRM2, and CENPF) in the aggressive stages (Gleason score > 8) of PCa tissues indicate their potential role(s) in the carcinogenic pathways. Our results present an innovative approach to extrapolate and validate hub genes responsive to the EPs and PBs, which may contribute to the severity of the disease prognosis, especially in the older population of US men.     

Rosmarinic Acid,as an NHE1 Activator,Decreases Skin Surface pH and Improves the Skin Barrier Function

Stratum corneum (SC) pH regulates skin barrier functions and elevated SC pH is an important factor in various inflammatory skin diseases. Acidic topical formulas have emerged as treatments for impaired skin barriers. Sodium proton exchanger 1 (NHE1) is an important factor in SC acidification. We investigated whether topical applications containing an NHE1 activator could improve skin barrier functions. We screened plant extracts to identify NHE1 activators in vitro and found Melissa officinalis leaf extract. Rosmarinic acid, a component of Melissa officinalis leaf extract, significantly increased NHE1 mRNA expression levels and NHE1 production. Immunofluorescence staining of NHE1 in 3D-cultured skin revealed greater upregulation of NHE1 expression by NHE1 activator cream, compared to vehicle cream. Epidermal lipid analysis revealed that the ceramide level was significantly higher upon application of the NHE1 activator cream on 3D-cultured skin, compared to application of a vehicle cream. In a clinical study of 50–60-year-old adult females (n = 21), application of the NHE1 activator-containing cream significantly improved skin barrier functions by reducing skin surface pH and transepidermal water loss and increasing skin hydration, compared to patients who applied vehicle cream and those receiving no treatment. Thus, creams containing NHE1 activators, such as rosmarinic acid, could help maintain or recover skin barrier functions.