Total classes of composition systems of discrete signals in isomorphous Galois fields

It is proposed a rule of total classes of composition systems of discrete frequency signals (CDF-signals) construction in extended Galois fields. It is carried out modeling and research a correlation properties of CDF-signals, and determined their practical attraction.     

An Experimental Investigation into the Feed Rate Capacity of Rotary Valve and Blow Tank Feeders

Industry widely uses rotary valves and blow tanks for the pneumatic conveying of products, each having their pros and cons depending on the specific application. This article shows the differing results obtained when low-velocity conveying a product through a common pipeline using both a drop-through rotary valve and a bottom-discharge blow tank feeder. A number of issues arise in the rotary valve system, the main one being rotary valve air leakage. A blow tank system, on the other hand, does not leak, as it is an enclosed system. The experimental results show dramatic differences in product throughput. Further exploration leads to a novel modification being made to the rotary valve system in an attempt to increase its capacity. The result of this modification shows a slight increase in output tonnage, but still significantly less than that obtained from the blow tank.     

Radioecological state of the territory and water area in Guba Andreev

The radioecological conditions which developed on the territory over the long operating time of the object of the naval fleet in Guba Andreev are described. The results of an analysis of the sources of the real and potential danger and measures to prevent dangerous effects for the environment and the workers at the time remediation work is performed are discussed. __________ Translated from Atomnaya énergiya, Vol. 101, No. 1, pp. 49–55, July, 2006.     

A prototype of a superconducting magnet for a 170-GHz gyrotron

Within the framework of the “International Thermonuclear Experimental Reactor” (ITER) program, a prototype of a superconducting magnet for a 170-GHz gyrotron has been developed, manufactured, and tested. The operating induction value (7.1 T at the center of a 219-mm-diameter cold hole and 8.1 T on the winding) is reached at a current of 185.2 A. In the final version of the magnet, the required induction value was reached without aging. Special requirements are imposed on the distribution of the magnetic field along the axis, including an abrupt field decrease on both sides of the magnet. Axial forces are additionally taken by a special device. The magnet’s sections are wound with multifiber conductors based on niobium-tin and niobium-titanium alloys. Seventeen resistive shunts are provided for protecting sections during their transition to the normal state. The magnet is equipped with a device for removing a part of energy from the sections. Mechanical stresses in the magnet’s sections and the structure’s power elements have been measured during tests.     

A device for measuring the equivalent resistance of an energized circuit section

A device for measuring the active resistance of a direct current energized circuit section is described. Owing to the use of up-to-date electronic components, an iteration measurement algorithm, and a sinusoidal signal as a test one, the following performance characteristics have been obtained: the measurement time is <1 s, and the error varies from 0.3 to 2.0% in a 100-Ω to 1-MΩ range and ≤25% in 10-to 100-Ω and 1-to 10-MΩ ranges.     

Effect of ultrasonic treatment on photoelectric and luminescent properties of ZnSe crystals

The results of the effect of ultrasonic treatment of ZnSe crystals on the structure of the energy spectrum of electronic states of centers with deep levels forming photoelectric and luminescent properties of this compound are presented. It is for the first time proved experimentally that the climb of edge dislocations under the effect of ultrasound leads to regrouping and generation of defects forming deep levels, which manifest themselves in phenomena of photosensitivity and radiative recombination.     

Sensitometric characteristics of an all‐solid‐state photoelectrochromic pixel for an electrochromic light‐addressable display

Abstract— An all solid‐state photoelectrochromic element (PECE) was developed on the basis of electrochromic layers of WO₃ and polyaniline with a layer of polymer electrolyte placed on a base of polyamidosulfoacid, in which a thin‐film CdS_xSe_1?x photoresistor was used as an electronic key. The dependence of the sensitometric characteristics of the PECE on the applied voltage was studied.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

Rapid Analysis of Interval Value Ordering

Two models of ranking the interval-defined objects were described. They are based on the principles of domination in probability and utility. Proposed was a two-stage ranking procedure where the objects are first ranked according to the model of domination in probability and then this ranking is corrected using the model of domination in utility.