The development of macrolayer thickness of water in the pool boiling regime

ABSTRACT

The main purpose of this study is to analyse the phenomenon of pool boiling in water over a horizontally placed copper tube heater of 28?mm diameter. The experiment has been carried out to observe the bubble growth and departure characteristics for the heat flux range up to 40,000?W/m². The entire process is being recorded by a digital camera at different time intervals. The measured parameters have been used to determine the initial layer thickness, macro layer thickness and critical heat flux and validated with models proposed in the literature.     

Book reviews

The Annals of Regional Science -     

Antimicrobial multiresistance in bacteria isolated from freshwater Chilean salmon farms

The intensive use of antimicrobial agents, mainly oxytetracycline, to prevent and control bacterial pathologies in Chilean salmon culture is a frequent practice. A total of 103 gram-negative oxytetracycline-resistant bacteria recovered from various sources of 4 Chilean freshwater salmon farms were identified and investigated for their susceptibility patterns to various antibacterial agents, by using an agar disk diffusion method. Antibacterial resistance patterns of isolates were not correlated with bacterial species or strain source. A high number of bacteria resistant to amoxicillin, ampicillin. erythromycin, and furazolidone, as well as an important frequency of bacterial resistance to florfenicol, chloramphenicol, cefotaxime and trimethoprim-sulfamethoxazole was found. On the contrary, the proportion of bacteria resistant to gentamicin, kanamycin, flumequine and enrofloxacin was rather low. Resistant microflora showed a high taxonomic variability and mainly consisted of non-fermenting bacteria (77.7%). These strains mainly belonged to the species Pseudomonas fluorescens (29), Aeromonas hydrophila (10), Stenotrophomonas maltophilia (6), isolated from salmon fingerlings, and Acinetobacter lwoffii (5) isolated from pelletized feed. The occurrence of simultaneous resistance to various antibacterials was frequent. We observe a high frequency of bacteria resistant to 6-10 antibacterials (74 strains), and antibiotic resistance index (ARI) values ranging from 0.38 to 0.48 for the four salmon farms studied. These results suggest that Chilean salmon farms might play a role as reservoirs of antibacterial multiresistant bacteria, thus prompting the necessity for a more restrictive attitude towards the intensive use of antibacterials in salmon farming.     

A semiautomated procedure for the determination of phosphorus in water, waste waters and particulates

Improved procedures for the determination of total dissolved phosphorus (TDP), particulate phosphorus (PP) and dissolved inorganic orthophosphate (DP) are described. Organic particulate material is solubilized in 5 n NaOH, and phosphorus compounds are oxidized and mineralized to orthophosphate by persulfate digestion. DP is determined by an improved automated molybdenum blue procedure that does not require sample pH adjustment or a correction for silicate interference in the 0–50 mg Si 1^?1 range. The use of 36-position digestion racks allows 32 TDP or PP samples to be digested in ca. 1 and 4 h respectively. Detection limits in μg of phosphorus 1^?1 are DP, 2; TDP, 5; and PP. 1. Waste water samples were analyzed for TDP and PP by the nitric acid-sulfuric acid procedure and by the proposed method. There was no significant difference between the two sets of data (P > 0.45).     

Results of evaluation of the strength of concrete placed in the shafts of cast-in-place piles

Conclusions 1. Application of the method of underwater concreting with the use of a container is inexpedient in connection with the presence of a large number of flaws detected in the shafts of cast-in-place piles formed by this method; concreting of holes by the VAT method is preferable.2. The strength of concrete in the shafts of cast-in-place piles increases, reaching a maximum at a depth of 0.4–0.5 the length of the shaft. Variation in strength along the shaft is explained primarily by the percentage of coarse aggregate contained in the concrete.3. The quality of pile concrete should be monitored during all stages of pile installation, and, primarily during the stage of concreting, i.e., when there is a chance of correcting an observed defect.All-Union Institute for the Design and Planning of Health Resorts. Scientific-Research Institute of Foundations and Underground Structures. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 14–17, September–October, 1976.     

A box beam finite element for the elastic analysis of thin-walled structures

The purpose of this paper is to present a formulation of a curved thin-walled box beam finite element having a variable cross-section with at least one vertical axis of symmetry.

To allow for the effects of warping and distortion, three degrees of freedom have been included in the formulation. These degrees of freedom have been designated as the rate of change of twisting angle, the distortional angle of the cross-section, and the rate of change of distortional angle. The effect of shear lag has also been included.

The element may be used for the elastic analysis of a variety of thin-walled structures and in particular for the preliminary analysis of box bridge decks where a three-dimensional analysis may be unnecessary. The accuracy of the element has been demonstrated by comparison of the results obtained with known results from other methods for some examples.     

The Effect of Agitator Impeller Design on Maximum Shear Stress, and the Resulting Impact on the Flocculation Process

Although it is extensively researched, flocculation in the water-treatment industry lacks a design procedure to assess accurately the performance of the different types of agitator impeller which are available. New high-efficiency, hydrofoil-type impellers offer substantial potential for flocculation duties in many areas, provided that they are applied correctly. This paper highlights the importance of the 'velocity gradient'and the distribution of shear within the agitation system. The objective of the paper is to help engineers to evaluate different types of proprietary impeller designs, using various techniques to examine the shear distribution applied to the system.     

国际航空货运枢纽港:以航空物流为新竞争优势

20世纪80年代以来,经济全球化促进了亚太地区的一些国家和地区的经济迅速增长,同时也带动了区内航空货运的发展.国际航空货运枢纽港(GTP:Global TransPark)是新经济背景下的一种新型货运机场,对提升区域竞争力有着重要的意义.我国有必要建设GTP,以期在21世纪电子商贸及高科技加工工业的发展上抢先建立滩头阵地.逐渐成熟的香港都会经济区有着"一国两制"的特殊地缘政治和制度优势,因而,在亚洲各竞争中的经济区域中,它是建设亚洲首个、也将是最大的GTP的最佳区位.GTP的建成运作可以提升该都会经济区的总体竞争力,加快其经济重构的步伐.结合区内的其它4个机场,珠海机场有条件发展成为GTP.然而,GTP的建设需要有关机场与地方政府间在关税、制空权、后勤服务以及水陆交通等方面进行协调,这将对该都会经济区的内部合作提出更新的挑战.     

A digital wind gust recorder

The instrument was a byproduct of an undergraduate final year project on wind power which was carried out by the Department of Mechanical Engineering of the University of Liverpool.The windmill test site was on an exposed, rocky island where there was no history of weather recording but a long tradition of violent winds.Field experience during the winter months suggested that corrosion fatigue arising from wind buffeting and salt spray would rank equally with maximum wind pressure as criteria of failure and if modern materials, so convenient for forming aerodynamic surfaces, were to be used then limited life concepts would need to be considered. This called for more knowledge of wind variations at the test site. A complete wind spectrum taken on chart recording instruments would have been ideal but since such such refined devices were not available the instrument to be described was designed.The only wind measuring instrument which was available was a rotating cup anemometer. This supplied an alternating voltage proportional to its rotational speed. It also operated a gear driven microswitch which could give an integrated “miles of wind” reading on an electromagnetic counter.Briefly the e.m.f. generated by the anemometer (Fig. 1) was matched against a pre-set voltage corresponding to the required gust velocity. When this was exceeded an appropriate counter was operated. Only the rising e.m.f. was significant. The subsequent fall was ignored. Initially three stages were incorporated which reported the gusts rising through forty, fifty and sixty knots, respectively. These recorded on separate counters. All basic settings were based on pitot-static speed determinations in a wind tunnel.