Impact of Storm-Water Runoff on Clogging and Fecal Bacteria Reduction in Sand Columns

Storm-water runoff has been identified as a major cause of coastal water quality degradation. Storm-water outfalls, common in many coastal towns, convey bacteria and other pollutants into the ocean and estuaries. In an effort to minimize this impact, the Town of Kure Beach, North Carolina, installed Dune Infiltration Systems (DIS) at two storm-water outfalls to receive storm-water runoff and allow infiltration beneath the beach dunes. A laboratory column experiment was performed to supplement this installation and determine the potential hydraulic and bacterial removal efficiency of the sand comprising the Kure Beach dunes. Columns constructed using sand collected at different depths of the dune were used to analyze the affect of bacteria application on infiltration and to examine the changes in bacteria removal that occur as infiltration rates are affected by bacteria-laden water application. Sand columns were loaded over a 60-day period with either bacteria-free storm water or storm water spiked with Escherichia coli. The seepage rate for the bacteria-spiked storm-water treatment was significantly lower (p<0.05) than the seepage rate of the bacteria-free treatment, particularly toward the end of the study. Bacteria application likely compounds the impact of sediment clogging at the sand/storm-water interface. This study indicates the need for maintenance when implementing a DIS or similar sand filter to maintain design infiltration rates, especially if reduced infiltration rates are not planned for in the design. However, a decrease in seepage rate was correlated with a decrease in effluent bacteria concentration in the bacteria-spiked storm-water sand columns. Thus, optimization is required to provide maximum infiltration of storm-water while maintaining bacteria removal efficiency.     

The association between price of regular-grade gasoline and injury and mortality rates among occupants involved in motorcycle- and automobile-related motor vehicle collisions

Motorcyclists have been reported to be more likely to die in a motor vehicle collision (MVC) than automobile occupants. With the recent increase in the pump price of gasoline, it has been reported that people are switching to motorcycles as main modes of transportation. This study evaluated the association between motor vehicle collision-related injury and mortality rates and increases in gasoline prices for occupants of automobiles and riders of motorcycles.There were an estimated 1,270,512 motorcycle MVC and 238,390,853 automobile MVC involved occupants in the U.S. from 1992 to 2007. Higher gasoline prices were associated with increased motorcycle-related injuries and deaths; however, this association no longer remained after accounting for changes in the number of registered vehicles.The current study observed that, while the number of injuries and fatalities in motorcycle-related MVCs increase with increasing gasoline price, rates remained largely unchanged. This suggests that the observed increase in motorcycle-related injuries and fatalities with increasing gasoline price is more a factor of the number of motorcycles on the road rather than operator characteristics.     

Validation of medium-pressure UV disinfection reactors by Lagrangian actinometry using dyed microspheres

Lagrangian actinometry (LA) has been demonstrated to represent an alternative to conventional biodosimetry for validation of ultraviolet (UV) disinfection systems used in drinking water treatment. However, previous applications of LA for this purpose have all involved monochromatic (λ = 254 nm) UV reactor systems. To address this issue, dyed microspheres (DMS) were applied for quantification of dose distribution delivery by field-scale UV reactor systems based on medium-pressure Hg lamp (MP) technology. These MP reactor systems are characterized by polychromatic output. Dose distribution estimates developed by LA for these reactors were reported as equivalent 254 nm distributions. When combined with the UV₂₅₄ dose-response behavior for challenge organisms used in simultaneous or parallel biodosimetry experiments, the dose distribution estimates developed from the microspheres yielded estimates of challenge organism inactivation that were in agreement with measured values. For one of the reactors tested, biodosimetry tests were conducted with two challenge organisms that had different UV dose-response behavior; UV dose distribution estimates from LA yielded predictions of microbial inactivation that were in agreement with measured inactivation responses for both challenge organisms for all test conditions. It is likely that the agreement between LA results and biodosimetry data was related, in part, to the agreement between the action spectra of the microspheres and the challenge organisms. Because LA yields a measure of the UV dose distribution delivered by a reactor, the information from LA assays will eliminate many sources of uncertainty in the design and operation of UV systems, thereby allowing for implementation of UV reactor systems that are less expensive than their predecessors, yet more reliable.     

Changes in the thermophysical properties of microcrystalline cellulose as function of carbonization temperature

Thermophysical properties of carbon materials derived from microcrystalline cellulose have been studied under vacuum and compared with earlier measurements conducted under nitrogen to better understand the influence of porosity, composition, microstructure, and atmosphere effects. The effective thermal conductivity in vacuum is lower than that observed in nitrogen primarily due to the conductivity of nitrogen gas. Radiation effects in both atmospheres were determined to be negligible. Reduction of thermal diffusivity in nitrogen was attributed to the effects of nitrogen gas phonon scattering. The trends for electrical and thermal property changes with structure are similar but not identical due to the differences in electron and phonon transport mechanisms.     

Characteristics of position sensitive detector pixels based on promising inorganic scintillators LaBr3:Ce and CeBr3

The energy resolution of different-geometry LaBr₃:Ce and CeBr₃ scintillation crystals grown by the Institute of Solid State Physics (Russian Academy of Sciences) by the order of the Skobel’tsyn Institute of Nuclear Physics (Moscow State University) was measured. The measurements were taken at energies of detected γ rays ranging from 20 keV to ～5 MeV. The samples under investigation were shaped as cylinders with a diameter of 0.5 cm and heights of 1.5 and 3.0 cm. The positional resolution along the crystal axis was also investigated for the CeBr₃ crystals by measuring the amplitudes of the scintillation signals from the opposite crystal ends. It was shown that the ratio of these amplitudes was dependent on the distance from a crystal end surface to the interaction point of a γ quantum inside the detector according to the linear law. The positional resolution along the crystal length appeared to be comparable to the crystal diameter. The results of the study suggest that CeBr₃ crystals have a great potential as position-sensitive elements of space-sensitive detectors for high-energy charge particles and γ rays.     

Store manager performance and satisfaction: Effects on store employee performance and satisfaction, store customer satisfaction, and store customer spending growth.

Based on emotional contagion theory and the value–profit chain literatures, the present study posits a number of hypotheses that show how managers in the small store, small number of employees retail context may affect store employees, customers, and potentially store performance. With data from 306 store managers, 1,615 store customer-contact employees, and 57,656 customers of a single retail chain, the authors examined relationships among store manager job satisfaction and job performance, store customer-contact employee job satisfaction and job performance, customer satisfaction with the retailer, and a customer-spending-based store performance metric (customer spending growth over a 2-year period). Via path analysis, several hypothesized direct and interaction relations among these constructs are supported. The results suggest implications for academic researchers and retail managers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Abandoned Mine Drainage in the Swatara Creek Basin, Southern Anthracite Coalfield, Pennsylvania, USA: 1. Stream Water Quality Trends Coinciding with the Return of Fish

Acidic mine drainage (AMD) from legacy anthracite mines has contaminated Swatara Creek in eastern Pennsylvania. Intermittently collected base-flow data for 1959–1986 indicate that fish were absent immediately downstream from the mined area where pH ranged from 3.5 to 7.2 and concentrations of sulfate, dissolved iron, and dissolved aluminum were as high as 250, 2.0, and 4.7 mg/L, respectively. However, in the 1990s, fish returned to upper Swatara Creek, coinciding with the implementation of AMD treatment (limestone drains, limestone diversion wells, limestone sand, constructed wetlands) in the watershed. During 1996–2006, as many as 25 species of fish were identified in the reach downstream from the mined area, with base-flow pH from 5.8 to 7.6 and concentrations of sulfate, dissolved iron, and dissolved aluminum as high as 120, 1.2, and 0.43 mg/L, respectively. Several of the fish taxa are intolerant of pollution and low pH, such as river chub (Nocomis micropogon) and longnose dace (Rhinichthys cataractae). Cold-water species such as brook trout (Salvelinus fontinalis) and warm-water species such as rock bass (Ambloplites rupestris) varied in predominance depending on stream flow and stream temperature. Storm flow data for 1996–2007 indicated pH, alkalinity, and sulfate concentrations decreased as the stream flow and associated storm-runoff component increased, whereas iron and other metal concentrations were poorly correlated with stream flow because of hysteresis effects (greater metal concentrations during rising stage than falling stage). Prior to 1999, pH < 5.0 was recorded during several storm events; however, since the implementation of AMD treatments, pH has been maintained near neutral. Flow-adjusted trends for 1997–2006 indicated significant increases in calcium; decreases in hydrogen ion, dissolved aluminum, dissolved and total manganese, and total iron; and no change in sulfate or dissolved iron in Swatara Creek immediately downstream from the mined area. The increased pH and calcium from limestone in treatment systems can be important for mitigating toxic effects of dissolved metals. Thus, treatment of AMD during the 1990s improved pH buffering, reduced metals transport, and helped to decrease metals toxicity to fish.     

EFFECT OF PARTICLE SIZE AND SAMPLE SIZE ON LIPID STABILITY OF MILLED FLAXSEED (Linum usitatissimum L.)

Experiments were conducted to determine the effect of sample size and particle size on lipid oxidation of milled flaxseed. An initial experiment showed that most of the lipid oxidation detected in milled flaxseed samples occurred on the surface that was exposed to the air during storage. In a subsequent experiment, milled flaxseed at 100, 200 and 300 g were stored in the dark in rectangular pans for 8, 24 and 48 days at 50C. Lipid oxidation, as determined by surface lipid content, peroxide value and α-linolenic acid content, was lower in the 300 g samples than in the 100 g samples of milled flaxseed. Large versus small samples had less apparent lipid oxidation because of their inherently lower surface to volume ratio. In a third experiment, oxidation was lower in lipid extracted from coarse ( > 600 µm) than fine particles ( < 600 µm), after 48 days of storage.

PRACTICAL APPLICATIONS

This research has practical applications to the flaxseed milling and food industries. These results show that assessment of lipid oxidation in milled flaxseed needs to consider sample size (collection). Milled flaxseed oxidized predominantly at the sample surface where a polymerized layer of flaxseed particles formed over time. Relatively little oxidation occurred in the interior of the sample. Thus, sampling from the surface or interior of a milled flaxseed sample will end in different results and conclusions. Similarly, results will vary with surface : interior ratio of milled flaxseed. Food manufacturers may want to discard the top layer of milled flaxseed that has been exposed to air. Lipid oxidation was less with coarse than fine particles. Thus it would be prudent not to use milled flaxseed with a finer particle size than is necessary for acceptable end-use quality.