DDFSGEN

This paper presents a functional compiler for the automatic design of Direct Digital Frequency Synthesizer (DDFS) integrated circuits (ICs) using a ROM based table look-up architecture. The compiler allows the user to specify high-level specifications such as the acceptable spurious response and it generates the IC architecture, floorplan, and layout. To construct the layout for different specifications, a library of parameterized macrocells has been developed in 1.2 m CMOS technology.A test chip with a quadrature DDFS module has been generated, using the compiler, and fabricated. The chip has two input signals: one is for frequency control while the other is for phase initialization. Input and output word lengths are 16 bits and 6 bits respectively. The chip complexity is approximately 12,000 transistors (DDFS core) and the die size is 4.8×2.9mm ². A maximum sample rate of 80 MHz has been attained implying a maximum sine (cosine) output frequency of 40 MHz and a frequency resolution of 1.22 kHz. The maximum spurious level measured is –46 dB.     

Learning from Examples with Information Theoretic Criteria

This paper discusses a framework for learning based on information theoretic criteria. A novel algorithm based on Renyi's quadratic entropy is used to train, directly from a data set, linear or nonlinear mappers for entropy maximization or minimization. We provide an intriguing analogy between the computation and an information potential measuring the interactions among the data samples. We also propose two approximations to the Kulback-Leibler divergence based on quadratic distances (Cauchy-Schwartz inequality and Euclidean distance). These distances can still be computed using the information potential. We test the newly proposed distances in blind source separation (unsupervised learning) and in feature extraction for classification (supervised learning). In blind source separation our algorithm is capable of separating instantaneously mixed sources, and for classification the performance of our classifier is comparable to the support vector machines (SVMs).     

AlGaInP visible resonant cavity light-emitting diodes

Visible (670-nm) resonant cavity light-emitting diodes (RCLEDs) composed entirely of AlGaInP alloys are discussed. The devices consist of a strained quantum well optical cavity active region surrounded by AlInP/(AlGa)InP distributed Bragg reflectors (DBRs). The bottom DBR is a 60.5 period high reflector while the top partial reflector, which determines the emission linewidth, is a five-period output coupling DBR with a reflectance of about 57%. The devices exhibit linewidths of 4.8 nm (13.3 meV) at 300 K and are promising for plastic fiber communication systems and monochromatic displays     

Ultralow oil-water IFTs using neutralized oxidized hydrocarbons as surfactants

Surfactants that may be suitable for application in enhanced oil recovery have been produced from C₂₂ and C₂₆ paraffinic and naphthenic petroleum fractions by a two-step process. The hydrocarbon feed stocks were first oxidized in the vapor-phase, followed by neutralization of the oxidized products with aqueous alkali. As a result, dilute solutions of organic acid salts were produced that achieved ultralow (<10⁻² dyne/cm) interfacial tensions against a synthetic oil. Surfactant solutions that exhibited the lowest interfacial tensions (IFTs) were prepared from neutralizations that used low concentrations of sodium hydroxide rather than sodium silicate, sodium tripolyphosphate, or sodium carbonate. Neutralizations that used sodium silicate or sodium carbonate resulted in surfactant solutions having IFT profiles that were less sensitive to the electrolyte concentration. When sodium hydroxide was combined with either sodium silicate or sodium tripolyphosphate in the neutralizations, solutions having intermediate IFT properties were produced. The amount of alkali used in the neutralizations was observed to affect the IFT properties of the resultant surfactant solution. The electrolyte concentration at which the minimum IFT occurred was inversely related to the pH of the surfactant solution. For surfactant solutions of common pH prepared from different concentrations of oxidized product, the minimum IFTs all occurred at the same concentration of electrolyte. Surfactant solutions remained interfacially active even in the presence of significant concentrations of calcium chloride. One pore volume of a solution containing only about 1% of active surfactant recovered 42.0% of the residual oil in a tertiary core-flood experiment.     

Thermally Stimulated Polarization and Depolarization in Halogen-Containing Lead Silicate Glasses

Thermally stimulated polarization and depolarization current (TSPC/TSDC) measurements were made on lead halide silicate glasses having compositions (65 − x )PbO· x PbX₂·35SiO₂ where x = 0, 0.1, 2, 10 and X = F, CI, Br, and I. The addition of halogen ions to lead silicate glasses gives rise to a new high-temperature TSDC peak in the vicinity of the peak previously observed in binary lead silicate glasses. The integrated area of the new peak is dependent on the amount and type of halogen ion present in the glass and does not saturate in the temperature range of our measurements. This new peak is attributed to space charge polarization of halogen ions.     

An evaluation of the soxtec system for oil determination in soybeans

The Soxtec System and the AOCS method were compared for oil determination in soybeans, and no significant difference was found between the two methods. The Root Mean Square Error (RMSE) and standard deviation for individual samples were higher for the Soxtec, but this was attributable to the regrinding step used. The study suggests that the Soxtec System is faster and just as accurate as the AOCS method.     

Monitoring Phenolic Composition of Maturing Maize Stover by High Performance Liquid Chromatography and Pyrolysis/Gas Chromatography/Mass Spectrometry*

Maize stovers collected every 14 days over an 84-day growth period were subjected to high-performance liquid chromatography with electrochemical detector (HPLC-ED) and pyrolysis/gas chromatography/mass spectrometry (PY/GC/MS) in order to monitor changes in the phenolic composition. Prior to HPLC-ED analyses, ground samples were sequentially extracted with (i) methanol, (ii) 0·1M sodium hydroxide and (iii) 2M sodium hydroxide in the presence of nitrobenzene to separate, respectively, free phenolic monomers, alkali-labile phenolic monomers and alkali-resistant lignin. In turn, solution (ii) was treated with alkaline nitrobenzene to obtain (iv) alkali-labile lignin. Pyrolysis was carried out on ground native samples by using a platinum heated filament pyrolyser. Increases in the absolute phenolic concentrations in the residues of 0·1M sodium hydroxide extraction and in the ratio of alkali-resistant lignin vs total lignin were observed by HPLC-ED during the first 28–42 days of maturation, reaching a steady level in the remaining maturation period. A linear increase of syringyl units vs guaiacyl units was for found the alkali-resistant lignin fraction over the entire period of maturation. Similar trends were showed by PY/GC/MS with regard to relative lignin content and syringyl/guaiacyl ratio. Both techniques showed their usefulness to gauge changes in the phenolic composition during the lignification process.     

Investigation of a Unique Commonality from a Wide Range of Natural Materials as Viewed from the Maillard Reaction Perspective

Based on the characteristics of a wide range of natural products, a more comprehensive understanding of the role of the Maillard reaction has been developed which describes a molecular basis for the production of a common set of flavourful, volatile aromatic compounds from the reactions between amino acids and sugars at elevated temperature (pressure cooking). By employing a variety of natural products, a clearer knowledge of the common mechanisms for the production of many important flavourants and odourants has been established. Regardless of the starting natural product the same qualitative profile of volatile materials is produced upon ‘pressure cooking’ an aqueous extract of the natural product. The notable differences in aroma arise not from significant differences in the qualitative nature of the materials but from variations in the quantitative distribution of the volatile materials produced.     

Genome Integrity and Neurological Disease

Neurological complications directly impact the lives of hundreds of millions of people worldwide. While the precise molecular mechanisms that underlie neuronal cell loss remain under debate, evidence indicates that the accumulation of genomic DNA damage and consequent cellular responses can promote apoptosis and neurodegenerative disease. This idea is supported by the fact that individuals who harbor pathogenic mutations in DNA damage response genes experience profound neuropathological manifestations. The review article here provides a general overview of the nervous system, the threats to DNA stability, and the mechanisms that protect genomic integrity while highlighting the connections of DNA repair defects to neurological disease. The information presented should serve as a prelude to the Special Issue “Genome Stability and Neurological Disease”, where experts discuss the role of DNA repair in preserving central nervous system function in greater depth.     

Novel processing,testing and characterization of copper/carbon nanotube (Cu/CNT) yarn composite conductor

Sustainable electrified aircraft propulsion (EAP) is likely to lead to an increase in the electrical wiring contained within a single aircraft. Since the electrical resistance and mass of copper (Cu) conductors are associated with power losses, it is desirable to design high-conductivity lightweight conductor materials, thus reducing the mass of components like motor windings, low-voltage signal cables, and transmission cables for data and power to improve the overall energy efficiency. This paper describes a unique framework for manufacturing metalized carbon nanotube (CNT) composite conductors, measuring their electrical conductivity and strength, and modeling the overall conductivity and current sharing within such composites. Tensile testing was conducted on the processed composite conductor cables with the use of acoustic emission and electrical resistivity to determine stress-dependent-failure mechanisms while monitoring the electrical conductivity. The average of measured electrical conductivities of annealed Cu/CNT samples from batch 5 was greater than theoretical predictions by 9.8 percent and was also greater than the conductivity of pure annealed Cu by 4.8 percent and had comparable ultimate tensile strengths. Additionally, those Cu/CNT samples provide a 13.5% weight saving over current state of the art copper wires. Theories explaining improved intrinsic conductivity are discussed.