Effects of annealing atmosphere and substrate on the photoluminescence and Raman scattering from Si nanocrystals in a SiO2 matrix

Thin films of SiO _x have been prepared on quartz or c-Si substrates by thermal evaporation of SiO in vacuum and post-annealed at 1373 K in an argon or hydrogen atmosphere. High-resolution electron microscopy has shown the existence of silicon nanocrystals in the annealed films, and this result has been confirmed by Raman scattering. Photoluminescence has been observed from annealed films and attributed to radiative recombination in Si nanocrystals. Its intensity is appreciably higher upon annealing in Ar than in H₂. It is shown that substrates strongly affect the Raman scattering from Si nanocrystals in nc-Si–SiO₂ thin films with low filling factors.     

Interphase boundary precipitation in a Ti-1.7 at. pct Er alloy

Microstructures in a Ti-1.7 at. pct Er alloy were studied in the arc-cast, rapidly solidified, and annealed conditions. Transmission electron microscopy (TEM) of the rapidly solidified materials revealed 3- to 20-nm-diameter precipitates that were distributed in regularly spaced, approximately planar sheets throughout equiaxed α Ti grains. The precipitate sheet morphology is similar to the interphase boundary carbide sheets that have been documented in many alloy steels. In addition, precipitate fibers with cross sections of approximately 5 nm and up to 500 nm in length were often found adjacent to particle sheets. Electron diffraction experiments showed that the structure and lattice spacings of the sheet and fibrous particles are consistent with elemental erbium. Subsequent annealing treatments resulted in the formation of a face-centered cubic allotrope of Er₂O₃. The present work describes the precipitate morphologies and crystallography and discusses the applicability of current ledge growth models of interphase boundary precipitation to titanium-erbium alloys.     

The role of prophylactic fasciotomy and medical treatment in limb ischemia and revascularization

Multiple studies have demonstrated that muscle poorly tolerates ischemia. When the ischemic state is unduly prolonged, the successfully replanted or revascularized limb undergoes deleterious biochemical reactions that cascade to vessel intimal damage, increased vessel permeability, and lowering of pH. The resultant tissue edema leads to increasing compartment pressures, which not only impede the recovery of function, but also can lead to irreversible muscle necrosis, increased risk of infection, and sepsis if not reversed in a timely fashion. The development of compartment syndrome jeopardizes not only the injured limb, but life itself secondary to the biochemical toxins produced by the ischemic extremity. A thorough understanding of the biochemistry of ischemia and reperfusion provides insight into the role of fasciotomy in the replanted or revascularized extremity. The scientific basis for fasciotomy in the revascularized or replanted limb is discussed as well as the potential "protective" role of pharmacologic agents in ischemic and reperfusion injury.     

Chemical modification of Topaz surfaces

In chemisorption, one is typically faced with the problem that the two-dimensional structure of the organic layer does not match the structure of the inorganic substrate. This work describes the first steps toward an induced epitaxial correlation of organic compounds on an inorganic surface. The idea of this work was to use a single crystal with a two-dimensional surface structure, Topaz (001), that matches an alkyl chain lattice better than existing substrates. X-ray reflectivity and FTIR experiments prove the surface modification of the Topaz, which is probably an etherification of the reactive OH-groups on the Topaz (001) surface.     

Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction

Metallurgical and Materials Transactions B - Superalloy gas turbine blades are being produced by investment casting and directional solidification. A new process, Fluidized Carbon Bed Cooling...     

The effect of reduced atmospheric deposition on soil and soil solution chemistry at a site subjected to long-term acidification, Nacetín, Czech Republic

During the 1990s the emissions of SO(2) fell dramatically by about 90% in the Czech Republic; the measured throughfall deposition of sulphur to a spruce forest at Nacetín in the Ore Mts. decreased from almost 50 kg ha(-1) in 1994 to 15 kg ha(-1) in 2005. The throughfall flux of Ca decreased from 17 kg ha(-1) in 1994 to 9 kg ha(-1) in 2005; no change was observed for Mg. The deposition of nitrogen ranged between 15 and 30 kg ha(-1) with no statistically significant trend in the period 1994-2005. The desorption of previously stored sulphur and the decrease of Ca deposition are the main factors controlling the recovery of soil solution. The pH of the soil solution at a depth of 30 cm remains unchanged, and the Al concentration decreased from 320 micromol l(-1) in 1997 to 140 micromol l(-1) in 2005. The enhanced leaching of base cations relative to no acidified conditions has continued, although the Ca concentration decreased from 110 microeq l(-1) in 1997 to 25 microeq l(-1) in 2005 in the mineral soil solution at 30 cm depth. This dramatic change was not observed for Mg concentration in soil solution, because its deposition remained stable during the observed period. Similar patterns were observed in the deeper soil solution at 90 cm. The reduction in Ca availability resulted in lower uptake by tree assimilatory tissues, measured as concentration in needles. Since 2005, the leaching of nitrate observed in soil solution at 30 cm depth has disappeared. By 2003 a similar situation occurred at 90 cm. Higher incorporation into the trees after 1997 could be an important factor. With respect to the formerly high sulphur deposition and consequently released aluminium, which could have negatively influenced the biotic immobilization driven by microbes and fungi, the recovery may have positively impacted and therefore improved retention in the ecosystem during recent years. The delay in the successful retention of nitrogen in the ecosystem was probably caused by the high mineralization of organic matter after improvement of chemical parameters in the organic horizon (increase in pH and decrease in Al concentration). It seems that high mineralization of stored organic matter after decades of high acidic deposition could be an important factor affecting the high losses of nitrogen in spruce forest ecosystems.     

Clinical experience with methohexital-nitrous oxide anaesthesia (author's transl)

The effects of methohexital, given as a 0.1% intravenous drip in combination with nitrous oxide were studied in 159 persons who had various types of surgical operations. The depth of anaesthesia was easily controlled, the circulation remained unaffected and the combination was well tolerated. There were no difficulties concerning either induction or recovery. The combination of i.v. methohexital and nitrous oxide proved very satisfactory for maintaining prolonged anaesthesia in elderly persons and patients in poor general health.     

Apex Resection in Zebrafish (Danio rerio) as a Model of Heart Regeneration: A Video-Assisted Guide

Ischemic heart disease is one of the leading causes of deaths worldwide. A major hindrance to resolving this challenge lies in the mammalian hearts inability to regenerate after injury. In contrast, zebrafish retain a regenerative capacity of the heart throughout their lifetimes. Apex resection (AR) is a popular zebrafish model for studying heart regeneration, and entails resecting 10–20% of the heart in the apex region, whereafter the regeneration process is monitored until the heart is fully regenerated within 60 days. Despite this popularity, video tutorials describing this technique in detail are lacking. In this paper we visualize and describe the entire AR procedure including anaesthesia, surgery, and recovery. In addition, we show that the concentration and duration of anaesthesia are important parameters to consider, to balance sufficient levels of sedation and minimizing mortality. Moreover, we provide examples of how zebrafish heart regeneration can be assessed both in 2D (immunohistochemistry of heart sections) and 3D (analyses of whole, tissue cleared hearts using multiphoton imaging). In summary, this paper aims to aid beginners in establishing and conducting the AR model in their laboratory, but also to spur further interest in improving the model and its evaluation.     

In situ thermal imaging and three-dimensional finite element modeling of tungsten carbide–cobalt during laser deposition

Laser deposition is being used for the fabrication of net shapes from a broad range of materials, including tungsten carbide–cobalt (WC–Co) cermets (composites composed of a metallic phase and a hard refractory phase). During deposition, an unusual thermal condition is created for cermets, resulting in rather complex microstructures. To provide a fundamental insight into the evolution of such microstructures, we studied the thermal behavior of WC–Co cermets during laser deposition involving complementary results from in situ high-speed thermal imaging and three-dimensional finite element modeling. The former allowed for the characterization of temperature gradients and cooling rates in the vicinity of the molten pool, whereas the latter allowed for simulation of the entire sample. By combining the two methods, a more robust analysis of the thermal behavior was achieved. The model and the imaging results correlate well with each other and with the alternating sublayers observed in the microstructure.