On the study of hydrogen production from water using solar thermal energy

Theoretical thermal efficiency of hydrogen production by one-step water splitting utilizing solar heat at high temperatures is calculated. Carnot efficiency is assumed for the conversion of effective work input, and the solar collection efficiency is considered for the total energy input. The overall efficiency shows its maximum in the range of temperature between 1500 and 2700 K depending upon the solar concentration ratio and the method of product separation. The technical feasibility of direct splitting method is discussed on the basis of those calculated results.     

Estimation of annual pollutant loadings in two small catchments and examination of their differences caused by regional properties.

A series of runoff surveys was conducted for more than one year in two small catchments of the Kamo River basin (75.4 km2) and the Takano River basin (66.8 km2) in Kyoto, Japan, which adjoin each other, and may have the same precipitation pattern. The investigation consisted of a high-frequency periodic survey, a long-term regular survey and a storm event survey. The survey results were compared with the regional properties of the basins, and the following results were obtained. (1) Pollutant loadings were successfully estimated as two portions of base discharge and storm events discharge from the survey results. (2) Estimated annual loading of the sites was 2.9-4.5, 1.3-1.8, 17-27, 1.3-2.2, 0.076-0.97 t/km2/y, respectively for COD(Mn), DOC, SS, TN and TP. (3) 52-53% of the whole flow, which was caused by rainfall events, conveyed 81-87, 68-73, 92-95, 64-67, 76-81% of the whole loading, respectively for COD(Mn), DOC, SS, TN and TP. (4) Differences of regional properties in two basins cause different runoff patterns, but the differences in runoff patterns also depend on the rainfall patterns. In general, a more urbanized basin receives early and strong influence of precipitation on the storm event runoff.     

Reversible and hierarchical composite gels with CdSe nanocrystals

To synthesize composite solid materials of metal salt and CdSe nanocrystals by a simple one-step method has been described. These solids can form stable gel in some organic solvent, such as benzene, cyclohexane and 1-butanol, especial in n-decane even below 0.1 wt/vol.%. Furthermore, these gels appear strong fluorescence which can be easily adjusted by the gel concentration. Temperature-dependent fluorescence spectra of composite gels suggested that the CdSe NCs aggregate together in gel state which would induce the energy transfer between nanocrystals and these aggregates could be reversibly disintegrated when gel was heated to form sol. TEM observations provided the further evidence of the energy transfer and suggested that the CdSe NCs were enchased regularly not only on the surface of self assembly of metal salt, but also embedded inside of self assembly in composite gel with small size nanocrystals. In contrast, in composite organogel with large nanocrystals they were only enchased on the edge of self assembly.     

Calculations of positron states in BEDT-TTF based organic superconductors

We have calculated positron distributions on a series of BEDT-TTF based organic conductors, whose anion species are I₃, Cu(NCS)₂, Cu(CN)[N(CN)₂], Cu[N(CN)₂]Br and KHg(SCN)₄. The results are discussed in connection with Fermiological studies by the positron annihilation method. Lifetimes and band masses of positrons have been calculated also.     

Tip radius effect of AFM probe on K4Nb6O17·3H2O nanosheets groove machining accuracy

This paper presents a technique for groove machining of potassium niobate nanosheets using an atomic force microscope (AFM). Groove machining operations are performed using super sharp silicon (SSS) probes. The tip radius of these probes is less than 5 nm and is one-third that of a conventional silicon (Si) probe. The results obtained using these probes are compared with those obtained using a Si probe, in order to examine the tip radius effects of the AFM probe on groove machining accuracy, i.e., coarseness of the machined groove. These results show that the degree of coarseness of the machined groove for varying machining loads with the SSS probe was much worse than that with the Si probe. Thus, groove machining with the SSS probe was more difficult to control with varying machining loads. We propose a groove fabrication model that considers the stochastic energy and difference in tip radius of the AFM probe. Using our groove fabrication model, changes in the coarseness of the machined groove for varying machining loads can be predicted.     

Studies on fish scale collagen of Pacific saury (Cololabis saira)

We purified and characterized Type I collagen from the scales of the Pacific saury (Cololabis saira) and compared it with collagen from other organisms. Subunit composition of C. saira collagen (2α1 + α2) was similar to that of red sea bream (Pagrus major) and porcine collagen. C. saira collagen did not form a firm gel after neutralization of pH in solution. The temperature of denaturation (24–25 °C) of C. saira collagen was slightly lower than that of P. major collagen (26–27 °C). The contents of proline and hydroxyproline were lower in red sea bream and Pacific saury collagen than in porcine collagen. Circular dichroism spectra and Fourier-transformed infrared spectra showed that heat denaturation caused unfolding of the triple helices in all three collagens.     

Surface crystallization and second-order optical non-linearity in Gd2O3–Bi2O3–B2O3 glasses

Some ternary Gd₂O₃–Bi₂O₃–B₂O₃ glasses are prepared, and crystallization behavior and second harmonic intensity are examined to develop new non-linear optical crystallized glasses. The glasses with Gd₂O₃ contents of 8–14 mol% have large densities of over 6 g/cm³ and large refractive indices of ～ 1.9. Transparent surface crystallized glasses consisting of two kinds of crystalline phases with different morphologies, i.e. plate shape and needle shape crystals, are fabricated by heat-treatment at temperatures between glass transition and crystallization temperatures. From second harmonic generation microscope observations, micro-Raman scattering spectra and XRD analyses, plate shape crystals are determined to be non-linear optical Gd_xBi_1KxBO₃ and needle shape crystals are Bi₃B₅O₁₂ having no second-order optical non-linearity. Since crystallized glasses consisting of Gd_xBi_1KxBO₃ crystals exhibit relatively strong SHGs, they have a high potential for application to light control devices.     

Synthesis and characterization of poly(ionic liquid)-grafted silica hybrid materials through surface radical chain-transfer polymerization and aqueous anion-exchange

Poly(ionic liquid)-grafted silica materials were firstly synthesized by polymerization of 1-vinyl-3-butylimidazolium bromide as a new ionic liquid monomer on mercaptopropylated silica by surface radical chain-transfer polymerization. The bromide counterion was exchanged with three other inorganic anions including tetrafluoroborate, hexafluorophosphate, and trifuoromethanesulfonate through simple aqueous anion-exchange reaction. The obtained poly(ionic liquid)-grafted silica materials were characterized by elemental analysis, infrared spectra, thermogravimetric analysis, and X-ray fluorescence. The wettabilities of the materials with different counterions were verified by static water contact angle measurement. This kind of new materials may have some potential in applied fields such as used as a catalyst, an extractant, a chromatographic stationary phase, etc.     

Effects of buttermilk powders on emulsification properties and acid tolerance of cream

Emulsifying properties and acid tolerance are 2 of the most important characteristics of cream. The effects of the buttermilk component, especially its phospholipids, on the emulsifying properties and acid tolerance of cream were investigated in this study. Two buttermilks with differing phospholipid contents and skimmed milk were used to evaluate the effects of phospholipids on the aforementioned parameters. The mean diameter of fat globules and the cream viscosity were used as indicators of emulsifying properties. Acid tolerance was evaluated by studying the effect of citric acid on the maximum viscosity of cream. This was tested by adding 400 μL of 10% (w/w) citric acid solution to cream every minute and simultaneously measuring pH and viscosity. In 45% and 40% fat cream systems, buttermilk, and especially that with higher phospholipid content, improved the emulsifying properties and acid tolerance of the cream. The components of buttermilk could alter the properties of the surface of fat globules, thereby altering the emulsification properties of the cream. However, neither of the tested buttermilks affected the emulsifying properties and acid tolerance of lower-fat (35% and 30%) cream systems. Emulsifying components exist in proportionately larger amounts in lower-fat creams, which could render the emulsifying properties resistant to change. The number of fat globules may also influence acid-induced changes in viscosity. The addition of phospholipids or lysophospholipids did not improve the acid tolerance of creams, a finding that may be attributable to the formation of complexes of phospholipids and protein. PRACTICAL APPLICATION: The findings presented herein demonstrate the ability to improve the acid tolerance of cream using materials derived from milk. Implementing these findings appropriately may result in a high-quality cooking cream.     

Absolute quantitation of quercetin and the glycosides in natural food additives by quantitative NMR

We are developing a simple absolute quantitation method for organic compounds, by means of quantitative nuclear magnetic resonance (qNMR), with traceability to the International System of Units (SI units). The qNMR method was applied to the absolute quantitation of rutin, isoquercitrin and quercetin in natural food additives, rutin (extract), enzymatically decomposed rutin extract and quercetin, and those compounds as commercial reagents. In this study, 1,4-bis-(trimethylsilyl)benzene-d(4) (1,4-BTMSB-d(4)) whose purity was precisely evaluated on the basis of metrology, was newly used as a qNMR reference material, to be added to the sample solution as an internal standard. The contents of quercetin and quercetin glycosides were calculated from the ratio of the signal intensities of each aromatic proton at the 2' position of the three compounds (these are observed at different chemical shifts) to the eighteen protons of the six methyl groups on 1,4-BTMSB-d(4) used as a qNMR reference material. Rapid and simple qNMR method with only one step process was carried by using 1,4-BTMSB-d(4). It was demonstrated that the purities of rutin, isoquercitrin and quercetin can be separately determined by qNMR without the need for a separation process or reference materials for all the target compounds.