Renormalization Group-Based Transport Modeling of Premixed Turbulent Combustion: I. Incompressible Deflagration Model

A new method for numerical modeling of premixed turbulent combustion is introduced based on the thin flame model. Applications are given, e.g., to flames in turbulent flow in channels and over backward facing steps.     

Network Observability Analysis through Measurement Jacobian Matrix Reduction

A method of observability analysis for the state estimation in power systems is presented. The method is based on a symbolic reduction of the measurement Jacobian matrix without its actual computation. The algorithm is characterized as being extremely simple and fast. The results of the algorithm application in the Energy Management System (EMS) of a large electric utility are given.     

Remote atmospheric breakdown for standoff detection by using an intense short laser pulse

A remote atmospheric breakdown is a very rich source of UV and broadband visible light that could provide an early warning of the presence of chemical-biological warfare agents at extended standoff distances. A negatively chirped laser pulse propagating in air compresses in time and focuses transversely, which results in a rapid laser intensity increase and ionization near the focal region that can be located kilometers away from the laser system. Proof-of-principle laboratory experiments are performed on the generation of remote atmospheric breakdown and the spectroscopic detection of mock biological warfare agents. We have generated third harmonics at 267 nm and UV broadband radiation in air from the compression and focusing of femtosecond laser pulses. Fluorescence emission from albumin aerosols as they were illuminated by the femtosecond laser pulse has been observed.     

Daytime operation of a pure rotational Raman lidar by use of a Fabry-Perot interferometer

We propose to use a Fabry-Perot interferometer (FPI) in a pure rotational Raman lidar to isolate return signals that are due to pure rotational Raman scattering from atmospheric nitrogen against the sky background. The main idea of this instrumental approach is that a FPI is applied as a frequency comb filter with the transmission peaks accurately matched to a comb of practically equidistant lines of a pure rotational Raman spectrum (PRRS) of nitrogen molecules. Thus a matched FPI transmission comb cuts out the spectrally continuous sky background light from the spectral gaps between the PRRS lines of nitrogen molecules while it is transparent to light within narrow spectral intervals about these lines. As the width of the spectral gaps between the lines of the PRRS of nitrogen molecules is -114 times the width of an individual spectral line, cutting out of the sky background from these gaps drastically improves the signal-to-background ratio of the pure rotational Raman lidar returns. This application of the FPI enables one to achieve daytime temperature profiling in the atmosphere with a pure rotational Raman lidar in the visible and near-UV spectral regions. We present an analysis of application of the FPI to filtering out the pure rotational Raman lidar returns against the solar background. To demonstrate the feasibility of the approach proposed, we present temperature profiles acquired during a whole-day measurement session in which a Raman lidar equipped with a FPI was used. For comparison, temperature profiles acquired with Vaisala radiosondes launched from the measurement site are also presented.     

Fluctuation-dissipation theorem and models of learning

Advances in statistical learning theory have resulted in a multitude of different designs of learning machines. But which ones are implemented by brains and other biological information processors? We analyze how various abstract Bayesian learners perform on different data and argue that it is difficult to determine which learning-theoretic computation is performed by a particular organism using just its performance in learning a stationary target (learning curve). Based on the fluctuation-dissipation relation in statistical physics, we then discuss a different experimental setup that might be able to solve the problem.     

An easy way to Pd–Zn nanoalloy with defined composition from a heterobimetallic Pd(μ–OOCMe)4Zn(OH2) complex as evidenced by XAFS and XRD

The heterobimetallic lantern complex Pd(μ-OOCMe)₄Zn(OH₂) was found to be readily reduced with H₂ under fairly mild conditions (150–250 °C, 5–10% H₂/He) both in the carbon-supported and crystalline states to afford a Pd–Zn nanoalloy as evidenced by the ICP elemental analysis, EXAFS, XANES and XRD data.      

Polymeric Hollow‐Fiber Bundles as Immersed Heat Exchangers

Plastic immersed heat exchangers are used in various applications where chemically neutral and noncorrosive equipment is required. Their potential competitors, namely, polymeric hollow‐fiber bundles, were investigated. Three different fiber bundles were tested as immersed coolers of a hot reservoir. Two types of polypropylene hollow fibers with various outside diameters were employed. Fibers were twisted with different curvature to achieve better distribution and improve natural convection on their outer surface. Calculation by experimental results was compared with the equation for natural convection across the horizontal cylinder, which overestimates heat transfer coefficients and can be applied for only rough estimation. Experimentally achieved pressure drops agreed well with theoretical prediction for laminar flow.     

Two-Stage Ozonation – Adsorption Purification of Ground Water from Trichloroethylene and Tetrachloroethylene with Application of Commercial Carbon Adsorbents

ABSTRACT

The aim of the research is to choose the most efficient adsorbent for two-stage ozone-sorption purification of groundwater containing both trichloroethylene (TCE) and tetrachloroethylene (PCE) between three carbon sorbents produced in Russia (AUT-M, CAUSORB-221, and AG-3). Sorption isotherms of TCE and PCE on AUT-M and CAUSORB-221 at 296 K were fitted by the Freundlich equation. The better TCE and PCE sorption ability of AUT-M in comparison with CAUSORB – 221 and AG-3 was demonstrated.

The optimum parameters for ozonation and sorption stages of groundwater purification from TCE and PCE are elucidated using laboratory and pilot-plant scales. Prolonged test of this technology for purification of ground demonstrated that the higher achievable efficiency of destruction with ozone is 94% for TCE and 38% for PCE. Ozonation-sorption treatment of groundwater allows one to achieve TCE and PCE removal efficiency of 96-97% and 92-94% correspondingly. The most efficient carbon sorbent is microporous carbon fiber AUT-M. Using this sorbent, TCE and PCE concentrations in treated water decrease below the MPC level (5 μg/L) adopted in Russia. It is concluded that the combination of ozonation with sorption of residual contaminants by carbon sorbents is a promising way for the purification of waters containing chlorinated contaminants.     

Determination of polychlorinated dibenzo-p-dioxins,dibenzofurans, and biphenyls by gas chromatography/mass spectrometry in the negative chemical ionization mode with different reagent gases

Reagent gases that are used in mass spectrometry in the NCI mode for the determination of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) are discussed. Ion-molecule reactions and respective characteristic ions that form while using reagent gases (CH(4), O(2), i-C(4)H(10), NH(3), H(2), He, Ar, Xe, SF(6)) or gas mixtures (CH(4)/O(2), Ar/CH(4), CH(4)/H(2)O, Ar/O(2), i-C(4)H(10)/CH(2)Cl(2)/O(2)) are reviewed. It is shown that only CH(4), O(2), CH(4)/O(2), and CH(4)/N(2)O are widely used and well studied, even though-in the case of these reagent gases-there are contradictions between the publications of various authors. Such reagent gases as NH(3) and He are not well studied, but further investigations of their use for the determination of organochlorine pollutants could be of interest. The possibilities of more sensitive and selective determination of PCDDs, PCDFs, and PCBs are discussed.