Determination of influence weights for scientific journals

A new citation matrix is proposed for the computation of journal influence weights applying Geller's methodology. Instead of self-citations, references to fringe journals are introduced and the proportions of all references (without self-citations) are used as matrix elements. On the basis of the determined weights, relative weights for fringe journals are calculated, i.e. the initial set (core) of journals is extended and simultaneously a rank order is obtained (by total influence and influence per article). The procedure is examplified on elementary particle physics (EPP) journals. Using first a reference/citation criterion, eight core journals were determined by iteration and then influence weights were calculated. A ranking by total influence and influence per article is presented for core and fringe journals in EPP.     

Characterization of PET nanocomposites produced by different melt‐based production methods

Poly(ethylene terephthalate) (PET) based nanocomposites containing 3 wt % of different nanoparticles (MontMorilloniTe–MMT; titanium dioxide–TiO₂; and silica dioxide–SiO₂) were prepared via two independent procedures: mechanical mixing with subsequent direct injection molding (DIM) and mechanical mixing, followed by extrusion blending and injection molding (EIM). The contributions of nanofillers with respect to pure PET were evaluated. The incorporation of nanofillers reduces the intrinsic viscosity of the polymer matrix when processed by DIM and EIM. SAXS results showed that: MMT layers were intercalated for both processing procedures, but slightly higher for EIM; a better dispersion with smaller agglomerates size is achieved for TiO₂ and SiO₂ nanoparticles for EIM than for DIM. According to the results of DSC analysis, all fillers behave as nucleating agents for PET except SiO₂ that acts as inhibitor in case of DIM procedure. The mechanical behavior was assessed in tensile testing. The mechanical test revealed that the addition of nanoparticles have a slight influence on the elastic modulus and yield stress, but a drastic negative influence on the deformation capabilities of the moldings. The measured optical properties of the moldings gloss and haze are also strongly affected by the presence of nanoparticles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Engineered Extracellular Matrices as Biomaterials of Tunable Composition and Function

Engineered and decellularized extracellular matrices (ECM) are receiving increasing interest in regenerative medicine as materials capable to induce cell growth/differentiation and tissue repair by physiological presentation of embedded cues. However, ECM production/decellularization processes and control over their composition remain primary challenges. This study reports engineering of ECM materials with customized properties, based on genetic manipulation of immortalized and death‐inducible human mesenchymal stromal cells (hMSC), cultured within 3D porous scaffolds under perfusion flow. The strategy allows for robust ECM deposition and subsequent decellularization by deliberate cell‐apoptosis induction. As compared to standard production and freeze/thaw treatment, this grants superior preservation of ECM, leading to enhanced bone formation upon implantation in calvarial defects. Tunability of ECM composition and function is exemplified by modification of the cell line to overexpress vascular endothelial growth factor alpha (VEGF), which results in selective ECM enrichment and superior vasculature recruitment in an ectopic implantation model. hMSC lines culture under perfusion‐flow is pivotal to achieve uniform scaffold decoration with ECM and to streamline the different engineering/decellularization phases in a single environmental chamber. The findings outline the paradigm of combining suitable cell lines and bioreactor systems for generating ECM‐based off‐the‐shelf materials, with custom set of signals designed to activate endogenous regenerative processes.     

Spectral Stokesmeter. 1. Implementation of the device

We describe a spectral Stokesmeter: a device for fast simultaneous measurement of the four Stokes parameters of light. It consists of an original optical part, a four-channel scanning optoelectronic system, and a controlling computer system. The original optical scheme was first proposed by us. It is based on two holographic gratings, one of which is a special type of polarization grating. It allows an easy calibration of the device comprising wavelength and sensitivity calibration. The spectral range of the present implementation of the spectral Stokesmeter is 520-750 nm, and the error in the measurement of the normalized Stokes parameters is < or = 0.05.     

Use of massively parallel molecular dynamics simulations for radiation damage in pyrochlores

DL_POLY_3 is a general purpose molecular dynamics (MD) simulation package designed to simulate systems of the order of tens of millions of particles and beyond by efficiently harnessing the power of modern computer clusters. Here we discuss the package design, functionality and report on performance and capability limits. We then report the application of DL_POLY_3 to study radiation cascades in Gd₂Ti₂O₇ and Gd₂Zr₂O₇, potential materials for high-level radioactive waste storage and discuss problems associated with the analysis of the cascades. We see little direct amorphisation but rather the start of a transition to the fluorite structure which is more pronounced for the Zr than the Ti compound.

---

Raman scattering of Si matrix with randomly distributed nanoparticles of semiconducting silicides

Samples, representing Si matrix with nanoformations of the semiconducting silicides beta-FeSi2 and Mg2Si are studied by Raman scattering. The unpolarized Raman spectra of the samples are interpreted in the framework of the appearance of interface-phonon polaritons. The theoretical dispersion relations of the interface-phonon polaritons in the system Si/silicide/Si are obtained from the Maxwell equations. The correspondence of the theoretical calculations and the experimental observations appeared to be sufficiently good. An evolution of the features in the Raman spectra on the experimental conditions is observed.     

Optical characterization of thin chalcogenide films by multiple-angle-of-incidence ellipsometry

Optical properties of thin chalcogenide films from the systems As-S(Se) and As-S-Se were investigated as a function of the film composition, film thickness and conditions of illumination by light using multiple-angle-of-incidence ellipsometry. Thin films were deposited by thermal evaporation and exposed to white light (halogen lamp) and to monochromatic light from Ar⁺ — (λ = 488, 514 nm) and He-Ne- (λ = 632.8 nm) lasers. The ellipsometric measurements were carried out at three different angles of light incidence in the interval 45-55°, at λ = 632.8 nm. An isotropic absorbing layer model was applied for calculation of the optical constants (refractive index, n and extinction coefficient, k) and film thickness, d. The homogeneity of the films was checked and verified by applying single-angle calculations at different angles. It was shown that the refractive index, n of As-S-Se films is independent of film thickness in the range of 50 to 1000 nm and its values varied from 2.45 to 3.05 for thin layers with composition As₂S₃ and As₂Se₃, respectively. The effect of increasing in the refractive index was observed after exposure to light which is related to the process of photodarkening in arsenic containing layers. The viability of the method for determining the optical constants of very thin chalcogenide films with a high accuracy was confirmed.     

Photoinduced changes in the optical constants of Ge–Se–AgI thin films

The photoinduced changes in the complex refractive index n=n − ik of thin films from the Ge–Se–AgI system with constant ratio Ge/Se=1/4 and concentrations of AgI of 0, 5 and 10 mol% are studied by real time measurements of reflectance (R) and transmittance (T) of the films. The phase delay (δ) between the components of the transmitted wave, which is proportional to the birefringence of the film, is measured in real time as well. The changes in the average value of the refractive index (Δn), and in the average value of the absorption index (Δk) in the imaginary part of n as well as the induced optical anisotropy are estimated by solving the inverse optical problem. It is found that involving small quantities of AgI into a Ge–Se matrix increases the sensitivity of the films, but the anisotropic effects are comparatively weakly in them. The maximum values of changes in the average refractive index (Δn=0.025) and in the average absorption index (Δk=−0.03) are obtained in the films, containing 5 and 10 mol% AgI, respectively. Considerable values of the photoinduced anisotropy – birefringence (Δn_a≈−0.002) and dichroism (ΔD≈0.05, which corresponds to Δk_a≈0.035) are observed in films without addition of AgI (“pure” Ge–Se film).     

Biochemical,antimicrobial and molecular characterization of a noncytotoxic bacteriocin produced by Lactobacillus plantarum ST71KS

Lactobacillus (Lb.) plantarum ST71KS was isolated from homemade goat feta cheese and identified using biochemical and molecular biology techniques. As shown by Tricine-SDS-PAGE, this lactic acid bacterium produces a bacteriocin (ST71KS) with an estimated molecular weight of 5.0 kDa. Bacteriocin ST71KS was not affected by the presence of α-amylase, catalase and remained stable in a wide range of pH and after treatment with Triton X-100, Triton X-114, Tween 20, Tween 80, NaCl, SDS, urea and EDTA. This bacteriocin also remained active after being heated at 100 °C for 2 h and even after 20 min at 121 °C; however, it was inactivated by proteolitic enzymes. Production of bacteriocin ST71KS reached 6400 AU/mL during stationary growth phase of Lb. plantarum cultivated in MRS at 30 °C and 37 °C. Bacteriocin ST71KS displayed a bactericidal effect against Listeria monocytogenes strains 603 and 607 and did not adsorb to the producer cells. Lb. plantarum ST71KS harbors two bacteriocin genes with homology to plantaricin S and pediocin PA-1. These characteristics indicate that bacteriocin ST71KS is a class IIa bacteriocin. The peptide presented no toxic effect when tested in vitro with kidney Vero cells, indicating safe technological application to control L. monocytogenes in foods.