Arsenic groundwater contamination and its health effects in the state of Uttar Pradesh (UP) in upper and middle Ganga plain, India: a severe danger

This communication presents results of our 2-year survey on groundwater arsenic contamination in three districts Ballia, Varanasi and Gazipur of Uttar Pradesh (UP) in the upper and middle Ganga plain, India. Analyses of 4,780 tubewell water samples revealed that arsenic concentrations in 46.5% exceeded 10 microg/L, in 26.7%, 50 microg/L and in 10% 300 microg/L limits. Arsenic concentrations up to 3,192 microg//L were observed. The age of tubewells (n=1,881) ranged from less than a year to 32 years, with an average of 6.5 years. Our study shows that older tubewells had a greater chance of contamination. Depth of tubewells (n=3,810) varied from 6 to 60.5 m with a mean of 25.75 m. A detailed study in three administrative units within Ballia district, i.e. block, Gram Panchayet, and village was carried out to assess the magnitude of the contamination. Before our survey the affected villagers were not aware that they were suffering from arsenical toxicity through contaminated drinking water. A preliminary clinical examination in 11 affected villages (10 from Ballia and 1 from Gazipur district) revealed typical arsenical skin lesions ranging from melanosis, keratosis to Bowens (suspected). Out of 989 villagers (691 adults, and 298 children) screened, 137 (19.8%) of the adults and 17 (5.7%) of the children were diagnosed to have typical arsenical skin lesions. Arsenical neuropathy and adverse obstetric outcome were also observed, indicating severity of exposure. The range of arsenic concentrations in hair, nail and urine was 137-10,900, 764-19,700 microg/kg, and 23-4,030 microg/L, respectively. The urine, hair and nail concentrations of arsenic correlated significantly (r=0.76, 0.61, and 0.55, respectively) with drinking water arsenic concentrations. The similarity to previous studies on arsenic contamination in West Bengal, Bihar and Bangladesh indicates that people from a significant part of the surveyed areas in UP are suffering and this will spread unless drives to raise awareness of arsenic toxicity are undertaken and an arsenic safe water supply is immediately introduced.     

Resuspension and settling of helminth eggs in water: Interactions with cohesive sediments

Helminth parasite eggs in low quality water represent main food safety and health hazards and are therefore important indicators used to determine whether such water can be used for irrigation. Through sedimentation helminth eggs accumulate in the sediment, however resuspension of deposited helminth eggs will lead to increased concentration of suspended eggs in the water. Our study aimed to determine the erodibility (erosion rate and erosion threshold) and settling velocity of Ascaris and Trichuris eggs as well as cohesive sediment at different time points after incorporation into the sediment. Cohesive sediment collected from a freshwater stream was used to prepare a sediment bed onto which helminth eggs were allowed to settle. The erodibility of both sediment and helminth eggs was found to decrease over time indicating that the eggs were incorporated into the surface material of the bed and that this material was stabilized through time. This interaction between eggs and bulk sediment was further manifested in an increased settling velocity of suspended eggs when sediment was present in the suspension as compared to a situation with settling in clean water. The incorporation into the sediment bed and the aggregation with sediment particles decrease the mobility of both helminth egg types. Our findings document that helminth eggs should not be viewed as single entities in water systems when modelling the distribution of eggs since both erodibility and settling velocity of eggs are determined by mobility of the sediment present in the water stream. Recalculation of the erosion threshold for helminth eggs and sediment showed that even at relatively low current velocities i.e. 0.07-0.12 m s⁻¹ newly deposited eggs will be mobile in open irrigation channels. These environmental factors affecting resuspension must be taken into account when developing models for sedimentation of helminth eggs in different water systems.     

Systemic Diagramming: An Approach to Decoding Urban Ecologies

For many students, sustainability has become an obligatory add-on for any project. Here Ulysses Sengupta and Deljana Iossifova explain how they have sought to address this in their teaching at the University of Nottingham through a ‘systemic diagramming’ approach. This provides essential tools for understanding how resource flows and environmental concerns are embedded in physical urban transformation, socioeconomic fault lines and underlying power relations.     

The magnitude of arsenic contamination in groundwater and its health effects to the inhabitants of the Jalangi--one of the 85 arsenic affected blocks in West Bengal, India

To better understand the magnitude of arsenic contamination in groundwater and its effects on human beings, a detailed study was carried out in Jalangi, one of the 85 arsenic affected blocks in West Bengal, India. Jalangi block is approximately 122 km2 in size and has a population of 215538. Of the 1916 water samples analyzed (about 31% of the total hand tubewells) from the Jalangi block, 77.8% were found to have arsenic above 10 microg l(-1) [the World Health Organization (WHO)-recommended level of arsenic in drinking water], 51% had arsenic above 50 microg l(-1) (the Indian standard of permissible limit of arsenic in drinking water) and 17% had arsenic at above 300 microg l(-1) (the concentration predicting overt arsenical skin lesions). From our preliminary medical screening, 1488 of the 7221 people examined in the 44 villages of Jalangi block exhibit definite arsenical skin lesions. An estimation of probable population that may suffer from arsenical skin lesions and cancer in the Jalangi block has been evaluated comparing along with international data. A total of 1600 biologic samples including hair, nail and urine have been analyzed from the affected villages of Jalangi block and on an average 88% of the biologic samples contain arsenic above the normal level. Thus, a vast population of the block may have arsenic body burden. Cases of Bowen's disease and cancer have been identified among adults who also show arsenical skin lesions and children in this block are also seriously affected. Obstetric examinations were also carried out in this block.     

Experimental measurement and numerical simulation of an impinging jet with application to thunderstorm microburst winds

Wind profiles and characteristics in a thunderstorm downburst are significantly different from that of regular boundary layer winds. This paper deals with the experimental and numerical simulation of a type of thunderstorm wind, namely the microburst, to study the outflow velocity characteristics. The microburst is simulated as a round jet, impinging onto a flat plate. A generic empirical equation for radial velocity profile is developed based on the experimental data, using hotwire, pressure rakes and particle image velocimetry (PIV). The experimental results are used to validate CFD simulations and to find the applicability of different turbulence models for this kind of flow. Favorable agreement between numerical and experimental studies indicates that CFD can be used for this kind of complex flow.     

Heat transfer correlation for high-porosity open-cell foam

Heat transfer correlation has been developed, assuming a simple cubic model of open-cell foam. The cross-linked porous structure is equivalent to a bundle of independent, slender tubes with protrusions. It may be presumed that the projected struts either cause an increase in heat transfer coefficient or they act as extended surfaces or fins. The effect of these protruded filaments has been judiciously integrated within the empirical correlation for cross-convective flow over the bank of smooth tubes. An augmentation in foam heat transfer coefficient has occurred due to cross-connections in struts. An excellent agreement has been observed between the predicted correlations and the existing ones which have been established through experimental data.     

Development of Unconventional Fabric from Banana (Musa Acuminata) Fibre for Industrial Uses

ABSTRACT

Banana fiber is a lingo-cellulosic under-exploited bast fiber, which obtained from the pseudo-stem of banana plant (Musa acuminata). In this study, an attempt has been made to explore the possibility of production of needle-punched nonwoven from fibrous material of biowaste for value addition and diversified uses. Mechanical processing for preparation of all banana, banana-jute (1:1), and banana-polypropylene (1:1) blended needle punched nonwoven has been optimized and processing parameters have been suggested. Softening treatment of banana fibre has been done successfully for better processing. Boiling in water with 1% nonionic detergent has been suggested as pre-processing for softening. Tenacity, elongation-at-break, initial modulus, breaking energy, stress relaxation, creep, compressibility, recovery-from-compression, bending load, electrical insulation, thermal insulation, sound insulation, air permeability, and frictional force have been evaluated and analyzed for all the above-mentioned samples. Based on those properties the probable use has been suggested as insulation (thermal and sound) and filter material.