Reprocessing of spent nuclear waste using ionic liquids

Nuclear power has once again attracted from all over the world due to many factors including the rise in oil process and environmental concerns on greenhouse gas emission resulting in global warming. However, spent fuel from nuclear power reactors is an enormous problem both from radiation hazard and economical point of view. Therefore, this review presents an overview of application of ionic liquids (ILs) in spent fuel reprocessing, particularly in the extraction of high-level radioactive aqueous waste from the processing of nuclear fuel.     

Prediction of the melt flow index using partial least squares and support vector regression in high-density polyethylene (HDPE) process

In polyolefin processes the melt flow index (MFI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MFI, a large number of MFI estimation and correlation methods have been proposed. In this work, mechanical predicting methods such as partial least squares (PLS) method and support vector regression (SVR) method are employed in contrast to conventional dynamic prediction schemes. Results of predictions are compared with other prediction results obtained from various dynamic prediction schemes to evaluate predicting performance. Hourly MFIs are predicted and compared with operation data for the high density polyethylene process involving frequent grade changes. We can see that PLS and SVR exhibit excellent predicting performance even for severe operating situations accompanying frequent grade changes.     

Nanorod-assembled spinel Li1.05Mn1.95O4 rods with a central tunnel along the rod-axis for high rate capability of rechargeable lithium-ion batteries

Nanorod-assembled spinel Li_1.05Mn_1.95O₄ rods with a central tunnel along the rod-axis were synthesized using highly crystalline β-MnO₂ rods as self-templates. The synthesized spinel Li_1.05Mn_1.95O₄ is an assembly of several single crystal-like nanorods with an average diameter and length of 100 and 400 nm, respectively, which was determined by microstructural Rietveld refinement using the synchrotron powder XRD data. Galvanostatic battery testing showed that central-tunneled and nanorod-assembled Li_1.05Mn_1.95O₄ rods have a high charge storage capacity at high current densities in comparison with those of the spinel rods without a tunnel structure and commercial powders. Moreover, a capacity retention value of ∼81% was observed at the end of 100 cycles at a current of 250 mAh g⁻¹.     

AP2M1 Supports TGF-β Signals to Promote Collagen Expression by Inhibiting Caveolin Expression

The extracellular matrix (ECM) is important for normal development and disease states, including inflammation and fibrosis. To understand the complex regulation of ECM, we performed a suppressor screening using Caenorhabditis elegans expressing the mutant ROL-6 collagen protein. One cuticle mutant has a mutation in dpy-23 that encodes the μ2 adaptin (AP2M1) of clathrin-associated protein complex II (AP-2). The subsequent suppressor screening for dpy-23 revealed the lon-2 mutation. LON-2 functions to regulate body size through negative regulation of the tumor growth factor-beta (TGF-β) signaling pathway responsible for ECM production. RNA-seq analysis showed a dominant change in the expression of collagen genes and cuticle components. We noted an increase in the cav-1 gene encoding caveolin-1, which functions in clathrin-independent endocytosis. By knockdown of cav-1, the reduced TGF-β signal was significantly restored in the dpy-23 mutant. In conclusion, the dpy-23 mutation upregulated cav-1 expression in the hypodermis, and increased CAV-1 resulted in a decrease of TβRI. Finally, the reduction of collagen expression including rol-6 by the reduced TGF-β signal influenced the cuticle formation of the dpy-23 mutant. These findings could help us to understand the complex process of ECM regulation in organism development and disease conditions.     

Regulation of ADAM10 by the TspanC8 Family of Tetraspanins and Their Therapeutic Potential

The ubiquitously expressed transmembrane protein a disintegrin and metalloproteinase 10 (ADAM10) functions as a “molecular scissor”, by cleaving the extracellular regions from its membrane protein substrates in a process termed ectodomain shedding. ADAM10 is known to have over 100 substrates including Notch, amyloid precursor protein, cadherins, and growth factors, and is important in health and implicated in diseases such as cancer and Alzheimer’s. The tetraspanins are a superfamily of membrane proteins that interact with specific partner proteins to regulate their intracellular trafficking, lateral mobility, and clustering at the cell surface. We and others have shown that ADAM10 interacts with a subgroup of six tetraspanins, termed the TspanC8 subgroup, which are closely related by protein sequence and comprise Tspan5, Tspan10, Tspan14, Tspan15, Tspan17, and Tspan33. Recent evidence suggests that different TspanC8/ADAM10 complexes have distinct substrates and that ADAM10 should not be regarded as a single scissor, but as six different TspanC8/ADAM10 scissor complexes. This review discusses the published evidence for this “six scissor” hypothesis and the therapeutic potential this offers.     

Thermal treatment effect on the magnetoelectric properties of (Ni0.5Zn0.5)Fe2O4/Pt/Pb(Zr0.3Ti0.7)O3 heterostructured thin films

Magnetoelectric (ME) property modulation in heterostructured (Ni_0.5Zn_0.5)Fe₂O₄/Pt/Pb(Zr_0.3Ti_0.7)O₃ (NZFO/Pt/PZT) thin films on platinized Si substrate by thermal annealing condition variation was studied. In an attempt to prevent interfacial reaction between NZFO and PZT layers during high temperature annealing, thin Pt layer was deposited which can serve as inter-diffusion barrier as well as electrode. The ferroelectric, magnetic, and ME properties of the heterostructured film were noticeably modulated due to microstructural evolution and clamping relaxation developed during thermal annealing process. Room temperature ME voltage coefficient of the heterostructured thin films was enhanced with increasing annealing temperature and reached to 29 mV/cm·Oe when annealed at 650 °C.     

Evaluation of pre‐heating and extraction solvents in antioxidant and antimicrobial activities of garlic,and their application in fresh pork patties

The objectives of this study were to screen the optimum conditions for antioxidant and antimicrobial activities of garlic as affected by pre‐heating and different extraction solvents, and to evaluate the antioxidant and antimicrobial effects of these extracts in ground meat during refrigerated storage. Methanol extracted garlic had a greater total phenolic content, 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH)‐radical scavenging activity and reducing power than water extracted one (P < 0.05), whereas the latter had a greater yield and iron chelating ability than the former (P < 0.05). Moreover, water extract from fresh garlic (WEFG) and methanol extract from heated garlic (MEHG) produced an inhibition zone against Escherichia coli O157:H7 and Listeria monocytogenes. The addition of garlic extracts (WEFG, MEHG and their combinations WEFMEHG)) to pork patties decreased the pH, hunter a values (redness), thiobarbituric acid substances values and the number of total plate count and Enterobacteriaceae (P < 0.05), while the hunter b values (yellowness) increased (P < 0.05). Results of this study indicated that the use of the garlic extracts was able to control lipid oxidation and microbial growth in pork patties.     

Continuous hydrothermal synthesis of HT-LiCoO2 in supercritical water

A detailed investigation was made into the production of high temperature lithium cobalt oxide (HT-LiCoO₂) particles by continuous hydrothermal synthesis via the reaction of cobalt nitrate, lithium hydroxide, and hydrogen peroxide. The experiments were carried out in both subcritical and supercritical water, at temperatures ranging from 300 to 411 °C, with residence times less than 1 min in all instances. Although Co₃O₄ particles were synthesized in subcritical water at similar reaction conditions designed for comparison, well-ordered particles of HT-LiCoO₂ were obtained in supercritical water. In supercritical conditions, the variations in temperature and residence time did not have significant impacts on the average particle size, particle size distribution, or morphology of obtained HT-LiCoO₂. However, it was important to supply excessive lithium hydroxide and hydrogen peroxide in order to synthesize single-phased HT-LiCoO₂ particles without undesired by-products. The hydrothermal synthetic route for LiCoO₂, CoO, and Co₃O₄ in both subcritical and supercritical conditions was postulated.     

Reduction of poliovirus 1, bacteriophages,Salmonella montevideo,and Escherichia coli O157:H7 on strawberries by physical and disinfectant washes

The efficacy levels of different physical and chemical washing treatments in the reduction of viral and bacterial pathogens from inoculated strawberries were evaluated. Escherichia coli O157:H7, Salmonella Montevideo, poliovirus 1, and the bacteriophages PRD1, phiX174, and MS2 were used as model and surrogate organisms. Chemicals readily available to producers and/or consumers were evaluated as antimicrobial additives for the production of washes. The gentle agitation of contaminated strawberries in water for 2 min led to reductions in microbial populations ranging from 41 to 79% and from 62 to 90% at water temperatures of 22 and 43 degrees C, respectively. Significant reductions (> 98%) in numbers of bacteria and viruses were obtained with sodium hypochlorite (50 to 300 ppm of free chlorine), Oxine or Carnebon (200 ppm of product generating "stabilized chlorine dioxide"), Tsunami (100 ppm of peroxyacetic acid), and Alcide (100 or 200 ppm of acidified sodium chlorite) washes. Overall, 200 ppm of acidified sodium chlorite produced the greatest reductions of microorganisms. Hydrogen peroxide (0.5%) was slightly less effective than free chlorine in a strawberry wash and caused slight fruit discoloration. Cetylpyridinium chloride (0.1%) was effective in the reduction of bacterial species, while trisodium phosphate (1%) was effective against viruses. The consumer-oriented produce wash Fit was very effective (> 99%) in reducing the numbers of bacteria but not in reducing the numbers of viruses. Another wash, Healthy Harvest, was significantly less effective than Fit in reducing bacterial pathogens but more effective for viruses. The performance of automatic dishwashing detergent was similar to that of Healthy Harvest and significantly better than that of liquid dishwashing detergent. Solutions containing table salt (2% NaCl) or vinegar (10%) reduced the numbers of bacteria by about 90%, whereas only the vinegar wash reduced the numbers of viruses significantly (ca. 95%).