Modeling of Out-of-Plane Compression Loading of Corrugated Paper Board Structures

A simple analytical model for calculating the nonlinear deformations of a corrugated core (fluting) during out-of-plane compression is developed. The results from the analytical model are compared to a more comprehensive finite-element model and to experiments. A connection between the boundary conditions and the damage state of the corrugated board is discussed. Including a modified set of boundary conditions gives an almost perfect match of the initial stiffness to the experimental results, indicating that the core might be significantly damaged as a result of the manufacturing process. Possibly, the strength of corrugated boards might be increased about 20% if one could avoid damaging the fluting during the manufacturing process.     

Autonomous synchronization of a DMT-VDSL system in unbundlednetworks

We present an algorithm that autonomously synchronizes all DMT-Zipper based VDSL modems in an unbundled access network, solving the problem with nonorthogonal NEXT that appears in systems with unsynchronized modems. The algorithm we present runs autonomously in each VDSL modem in the central office or in the street cabinet. We determine the other modems' relative frame offsets by exploiting their NEXT signal using the inherent cyclic redundancy found in DMT signals. By estimating the relative frame offsets of the other users, we can adjust a given user's own frame-timing relative to the mean of the others. With our method all modems in the network will be synchronized to within a small fraction of the total DMT frame-length, suppressing the nonorthogonal NEXT to a level far below the background noise-floor. This means that we can achieve the same performance in an unbundled access network without any master clock reference as in a system where all modems are perfectly synchronized using a master clock     

Determination of the previous maximum temperature of heat-treated minced meat by near infrared reflectance spectroscopy

Determination of the heat treatment given to minced meat has been explored on a preliminary basis by near infrared reflectance (NIR) analysis. Minced meat samples from beef were heated at five different temperatures from 50 to 95°C. Correlating NIR-determined temperatures ranging against actual laboratory treatment temperatures gave correlation coefficients of 0.987 for ‘wet’ meat and 0.992 for freeze dried meat samples. The minimum root mean square of determination errors obtained were 3.9°C for ‘wet’ meat and 2.5°C for freeze dried meat samples.     

Growth hormone and bone

It is well known that GH is important in the regulation of longitudinal bone growth. Its role in the regulation of bone metabolism in man has not been understood until recently. Several in vivo and in vitro studies have demonstrated that GH is important in the regulation of both bone formation and bone resorption. In Figure 9 a simplified model for the cellular effects of GH in the regulation of bone remodeling is presented (Fig. 9). GH increases bone formation in two ways: via a direct interaction with GHRs on osteoblasts and via an induction of endocrine and autocrine/paracrine IGF-I. It is difficult to say how much of the GH effect is mediated by IGFs and how much is IGF-independent. GH treatment also results in increased bone resorption. It is still unknown whether osteoclasts express functional GHRs, but recent in vitro studies indicate that GH regulates osteoclast formation in bone marrow cultures. Possible modulations of the GH/IGF axis by glucocorticoids and estrogens are also included in Fig. 9. GH deficiency results in a decreased bone mass in both man and experimental animals. Long-term treatment (> 18 months) of GHD patients with GH results in an increased bone mass. GH treatment also increases bone mass and the total mechanical strength of bones in rats with a normal GH secretion. Recent clinical studies demonstrate that GH treatment of patients with normal GH secretion increases biochemical markers for both bone formation and bone resorption. Because of the short duration of GH treatment in man with normal GH secretion, the effect on bone mass is still inconclusive. Interestingly, GH treatment to GHD adults initially results in increased bone resorption with an increased number of bone-remodeling units and more newly produced unmineralized bone, resulting in an apparent low or unchanged bone mass. However, GH treatment for more than 18 months gives increased bone formation and bone mineralization of newly produced bone and a concomitant increase in bone mass as determined with DEXA. Thus, the action of GH on bone metabolism in GHD adults is 2-fold: it stimulates both bone resorption and bone formation. We therefore propose "the biphasic model" of GH action in bone remodeling (Fig. 10). According to this model, GH initially increases bone resorption with a concomitant bone loss that is followed by a phase of increased bone formation. After the moment when bone formation is stimulated more than bone resorption (transition point), bone mass is increased. However, a net gain of bone mass caused by GH may take some time as the initial decrease in bone mass must first be replaced (Fig. 10). When all clinical studies of GH treatment of GHD adults are taken into account, it appears that the "transition point" occurs after approximately 6 months and that a net increase of bone mass will be seen after 12-18 months of GH treatment. It should be emphasized that the biphasic model of GH action in bone remodeling is based on findings in GHD adults. It remains to be clarified whether or not it is valid for subjects with normal GH secretion. A treatment intended to increase the effects of GH/IGF-I axis on bone metabolism might include: 1) GH, 2) IGF, 3) other hormones/factors increasing the local IGF-I production in bone, and 4) GH-releasing factors. Other hormones/growth factors increasing local IGF may be important but are not discussed in this article. IGF-I has been shown to increase bone mass in animal models and biochemical markers in humans. However, no effect on bone mass has yet been presented in humans. Because the financial cost for GH treatment is high it has been suggested that GH-releasing factors might be used to stimulate the GH/IGF-I axis. The advantage of GH-releasing factors over GH is that some of them can be administered orally and that they may induce a more physiological GH secretion. (ABSTRACT TRUNCATED)     

Co-twin study of the effect of environment and dietary elements on acquisition of Helicobacter pylori infection

We report a rare case of corrected transposition of great arteries and mitral atresia associated with double aoric arch. The patient showed polypnea and cyanosis soon after birth. She underwent balloon atrioseptostomy at the age of 18 days and pulmonary artery banding (PAB) at 24 days. But she showed severe persistent stridor after PAB. Esophagography and left counter-current aortography revealed double aortic arch. At the age of 49 days, division of the left lesser arch and ligation of patent ductus arteriosus were performed through left lateral thoracotomy. Stridor disappeared completely following operation. She underwent total cavopulmonary connection using a 18 mm Gore-Tex graft as intraatrial conduit concomitant with pacemaker implantation at the age of 8 years. Postoperative course was uneventful. To our knowledge, this is the first successful case report of surgical correction of corrected transposition of great arteries and mitral atresia associated with double aoric arch.     

Zipper: a duplex method for VDSL based on DMT

We present a new duplex scheme, called Zipper, for discrete multitone (DMT)-based very high bit-rate digital subscriber line (VDSL) systems on copper wires. This scheme divides the available bandwidth by assigning different subcarriers for the upstream and downstream directions. It has high flexibility to divide the capacity between the up and downstream, as well as good coexistence possibilities with other systems such as ADSL. Simulation results show the high bit-rate performance in different environments such as mixed ADSL and VDSL traffic under radio frequency interference and with different background noise sources     

Identification of New Purpuroine Analogues from the Arctic Echinodermata Pteraster militaris That Inhibit FLT3-ITD+ AML Cell Lines

Isolation of bioactive products from the marine environment is considered a very promising approach to identify new compounds that can be used for further drug development. In this work we have isolated three new compounds from the purpuroine family by mass-guided preparative HPLC; purpuroine K-M. These compounds where screened for antibacterial- and antifungal activity, antibiofilm formation and anti-cell proliferation activity. Additionally, apoptosis-, cell cycle-, kinase binding- and docking studies were performed to evaluate the mechanism-of-action. None of the compounds showed activity in antibacterial-, antibiofilm- or antifungal assays. However, one of the isolated compounds, purpuroine K, showed activity against two cell lines, MV-4-11 and MOLM-13, two AML cell lines both carrying the FTL3-ITD mutation. In MV-4-11 cells, purpuroine K was found to increase apoptosis and arrest cells cycle in G1/G0, which is a common feature of FLT3 inhibitors. Interactions between purpuroine K and the FLT3 wild type or FLT3 ITD mutant proteins could however not be elucidated in our kinase binding and docking studies. In conclusion, we have isolated three novel molecules, purpuroine K-M, one of which (purpuroine K) shows a potent activity against FLT3-ITD mutated AML cell lines, however, the molecular target(s) of purpuroine K still need to be further investigated.     

On-line NIR analysis of fat, water and protein in industrial scale ground meat batches

Fat, water and protein contents in industrial scale meat batches were determined on-line by near infrared (NIR) reflectance spectroscopy. The NIR instrument was mounted at the outlet of a large meat grinder, and the measurements were performed in an industrial environment. Beef and pork samples, with chemical compositions of 7-26% fat, 58-75% water and 15-21% protein, were processed with hole diameters of 13mm in the grinder plate. Calibrations were made both for a combined set of beef and pork samples, and for separate sets of beef and pork samples. Validations were either done by full cross validation of the calibration set, or by bias corrected prediction of a test set. Prediction errors for the two sample sets, expressed as root mean square errors of cross validation or standard error of prediction, were in the ranges 0.82-1.49% fat, 0.94-1.33% water and 0.35-0.70% protein, depending of sample set and species of animal. The presented application is an improvement to the existing manual meat standardisation procedure, and has been implemented for regular use in a Norwegian meat manufacturing plant.     

Designing an Educational Website to Improve Quality of Supportive Oncology Care for Women with Ovarian Cancer: An Expert Usability Review and Analysis

A broad-based research team developed a Health Insurance Portability and Accountability Act (HIPAA)-compliant educational website for women with ovarian cancer to improve the quality of supportive oncology care. Prior to a randomized clinical trial of the website, initial usability testing was implemented to evaluate the website. The initial review found that 165/247 checklist items had sufficient information to allow for evaluation with the website achieving an overall score of 63%. By category, the lowest scores were for the Home Page, Task Orientation, Page Layout & Visual Design, and Help, Feedback & Error Tolerance. Major issues thought to potentially impede actual usage were prioritized in redevelopment and the second usability review, conducted by the same expert, saw an improvement in scores. Incorporating usability concepts from the start of development, fulfilling the positive expectations of end-users, and identifying the technical and personal factors that optimize use may greatly enhance the usage of health websites.