Electrical and Reliability Studies of “Wet N2O” Tunnel Oxides Grown on Silicon for Flash Memory Applications

In this paper, we report the electrical characteristics and reliability studies on tunnel oxides fabricated by "wet N₂O" oxidation of silicon in an ambient of water vapor and N₂O at a furnace temperature of 800 degC. Tunnel oxides that have an equivalent oxide thickness of 67 A are subjected to a constant-current stress (CCS) amount of -100 mA/cm² using a MOS capacitor to obtain information on stress-induced leakage current (SILC), interface, and bulk trap generation. The obtained results clearly demonstrate the superior performance features of the present tunnel oxides with reduced SILC, lower trap generation, minimum change in gate voltage, and higher charge-to-breakdown during CCS studies. X-ray photoelectron spectroscopy depth profile studies of the tunnel oxide interfaces have shown that the improved performance characteristics and reliability can be attributed to the incorporation of about 8.5% nitrogen at the oxide-silicon interface of the samples formed by the "wet N₂O" process that involves low-temperature oxidation and annealing at 800 degC.     

Preparation and characterization of crosslinked chitosan microspheres for the colonic delivery of 5-fluorouracil

In this work, we attempted to develop a simple and inexpensive colon specific pulsatile drug-delivery system using chitosan microspheres loaded with 5-fluorouracil (5-FU) using an enteric-coated soft gelatin capsule. Chemical crosslinking by glutaraldehyde and interactions between the polymer and the drug were determined by Fourier transform infrared spectral study. Scanning electron microscopy of the microspheres revealed spherical shapes with smooth surfaces. Differential scanning calorimetry studies confirmed the molecular dispersion of the drug in the polymer matrix. Three different formulations (i.e., F1, F2, and F3) were prepared by the variation of the amount of 5-FU. Encapsulation efficiencies of 5.5, 10.8, and 17.9% for drug loadings of 10, 20, and 50%, respectively, were obtained. In vitro release studies were conducted at pH 1.2 and pH 7.4 (to simulate actual gastrointestinal fluid and gastrointestinal tract conditions, respectively). The results indicate that chitosan microspheres released 5-FU in both acidic (60%) and basic pH (40%) conditions, whereas the capsule (filled with chitosan microspheres) showed only 8–10% release in acidic media and nearly 90% in basic media within 12 h. The newly designed pulsatile capsule device could be used for targeting 5-FU to the colon. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Efficient Algorithms for Block-Cyclic Redistribution of Arrays

The block-cyclic data distribution is commonly used to organize array elements over the processors of a coarse-grained distributed memory parallel computer. In many scientific applications, the data layout must be reorganized at run-time in order to enhance locality and reduce remote memory access overheads. In this paper we present a general framework for developing array redistribution algorithms. Using this framework, we have developed efficient algorithms that redistribute an array from one block-cyclic layout to another. Block-cyclic redistribution consists of index set computation , wherein the destination locations for individual data blocks are calculated, and data communication , wherein these blocks are exchanged between processors. The framework treats both these operations in a uniform and integrated way. We have developed efficient and distributed algorithms for index set computation that do not require any interprocessor communication. To perform data communication in a conflict-free manner, we have developed direct indirect and hybrid algorithms. In the direct algorithm, a data block is transferred directly to its destination processor. In an indirect algorithm, data blocks are moved from source to destination processors through intermediate relay processors. The hybrid algorithm is a combination of the direct and indirect algorithms. Our framework is based on a generalized circulant matrix formalism of the redistribution problem and a general purpose distributed memory model of the parallel machine. Our algorithms sustain excellent performance over a wide range of problem and machine parameters. We have implemented our algorithms using MPI, to allow for easy portability across different HPC platforms. Experimental results on the IBM SP-2 and the Cray T3D show superior performance over previous approaches. When the block size of the cyclic data layout changes by a factor of K , the redistribution can be performed in O( log K) communication steps. This is true even when K is a prime number. In contrast, previous approaches take O(K) communication steps for redistribution. Our framework can be used for developing scalable redistribution libraries, for efficiently implementing parallelizing compiler directives, and for developing parallel algorithms for various applications. Redistribution algorithms are especially useful in signal processing applications, where the data access patterns change significantly between computational phases. They are also necessary in linear algebra programs, to perform matrix transpose operations. Received June 1, 1997; revised March 10, 1998.     

Deep fat frying characteristics of chickpea flour suspensions

Chickpea ( Cicer arietinum ) (Bengal gram) flour suspensions are widely used in the preparation of oriental traditional snacks and sweets. We investigated the frying characteristics of small and large boondi , a traditional product made by deep fat frying the droplets of chickpea flour suspensions. The rate of water loss during frying was much higher than that of oil uptake. Towards the end of frying, the bulk densities of small and large boondis were similar and remained constant. The analysis of microstructure of the product indicated that there were large pores and vacuoles inside, whereas the outer surface remained fairly smooth with fewer smaller pores. The colour changes during frying were described in terms of tristimulus values (brightness, hue and chroma) and yellowness, of which brightness decreased markedly; the colour of the product changed from bright yellowish orange (raw batter) to dull orange (finished product).     

High-speed performance of OMCVD grown InAlAs/InGaAs MSMphotodetectors at 1.5 μm and 1.3 μm wavelengths

A report is presented on the fabrication of high-speed In_0.53 Ga_0.47As metal-semiconductor-metal (MSM) photodetectors incorporating a high-quality lattice-matched InAlAs barrier enhancement layer, grown by organometallic chemical vapor deposition (OMCVD). Fast responses of ~55 ps full-width half-maximum at 1.5 μm and ~48 ps at 1.3 μm wavelengths are observed, corresponding to intrinsic device bandwidths of ~8 GHz and ~11 GHz, respectively. The absence of any tail to the pulse response, and of any low-bias DC gain, indicates a low-trap density at the InAlAs/InGaAs heterointerface. Bias independent dark currents of 10-20 μA are observed below breakdown, which occurred at >30 V in devices with a 500-A-thick InAlAs layer     

Bioactive compounds and antioxidant potential of mango peel extract

Bioactive compounds such as polyphenols, carotenoids and anthocyanins present in fruits and vegetables are receiving increased attention because of their potential antioxidant activity. Consumption of such antioxidants offers health benefits including protection against cardiovascular diseases and cancer. Mango peel is a major byproduct obtained during the processing of mango products such as mango pulp and amchur. In the present study, the antioxidant activity of mango peel extracts was examined. Polyphenol, anthocyanin and carotenoid contents in acetone extract of peels were determined. Ripe peels contained higher amount of anthocyanins and carotenoids compared to raw peels while raw mango peel had high polyphenol content. Antioxidant activity of ripe and raw mango peels extracted in acetone was determined using different antioxidant systems such as reducing power activity, DPPH free radical scavenging activity, iron induced lipid peroxidation of liver microsomes and soybean lipoxygenase inhibition. The IC₅₀ values were found to be in the range of 1.39–5.24 μg of gallic acid equivalents. Thus, the mango peel extract exhibited good antioxidant activity in different systems and thus may be used in nutraceutical and functional foods.     

Effect of ionizing radiation on antinutritional features of velvet bean seeds (Mucuna pruriens)

Impact of gamma irradiation on the antinutritional constituents of seeds of Mucuna pruriens was assessed on exposing to doses of 2.5, 5.0, 7.5, 10, 15 and 30 kGy. Except for 2.5 kGy, the rest showed significant dose-dependent increase in phenolics. Tannin concentration did not differ significantly up to 7.5 kGy, while it significantly increased at higher doses. Excluding 2.5 kGy, the rest of the treatments showed significant decreases in the phytic acid and complete degradation was attained at 15 and 30 kGy. The l-DOPA concentration showed a dose-dependent decline. A trace amount of hemagglutination activity was seen on human erythrocytes in raw seeds, which was completely absent on irradiation (>5 kGy). Concentration of Polonium-210, a natural radionuclide falls within the admissible limits for consumption. As Mucuna seeds serve as food, feed or as pharmaceuticals, it may be necessary to set the ionizing radiation to a specific dose to retain optimum levels or to eliminate phenolics, tannins, phytic acid and L-DOPA. As irradiation is a physical and cold process, it may be ideal and emerge as an important technique to improve the nutritional or pharmaceutical quality of Mucuna seeds and its products.     

Synthesis of zeolite beta using silica gel as a source of SiO2

The feasibility of synthesising pure zeolite beta in high yields using silica gel as the source of SiO₂ is demonstrated. The phase-purity and yield of beta is enhanced by using silica gels with high surface area. The influence of various synthesis parameters (Si/Al ratio, alkalinity, dilution level, concentration of the organic base, etc.) on the kinetics of synthesis as well as the quality and yield of the zeolite have been investigated. A correlation between XRD crystallinity of the samples with varying degrees of crystallinity and that estimated from framework IR spectroscopy, differential thermal analysis and adsorption of n-hexane is demonstrated. The dependence of the yield of zeolite beta on SiO₂/Al₂O₃ ratio of the gel is also reported. The results of the present study indicate the feasibility of a cheaper route for the manufacture of zeolite beta.     

Bezier surface/surface intersection

The computational requirements and accuracy of two methods for finding the intersection of Bezier surfaces are examined. In both methods, the existence of an intersection curve is confirmed by using the convex hull property of such surfaces. The first method evaluates the intersection by recursive subdivision of two patches with overlapping hulls. The second method detects a point on the intersection curve and then incrementally traces the intersection in the parametric spaces of the two surfaces. With both methods, the intersection of a pair of first-order planar patches must be solved analytically. The intersection is approximated by first-order Bezier patches in the first case and by planar triangles in the second. Overall, the method of incremental tracing is shown to give more accurate results than the method of recursive subdivision     

JAIN protocol APIs

JAIN envisions the creation of a number of Java APIs that abstract the details of networks and protocol implementations, and allow for the development of portable applications. The JAIN Protocol Experts Group (PEG) will focus on developing Java APIs for protocols used in telephony, INs, wireless networks, and the Internet. The PEG is organized into an SS7 subgroup and an IP subgroup. The article provides an introduction to PEG. It next describes the JAIN SS7 APIs. It then describes the JAIN IP APIs. The article also explains how JAIN SS7 and IP APIs can be leveraged for the converged SS7-IP networks of the future and describes the JAIN PEG roadmap