Disintegration process of yttria-stabilized zirconia ceramics using hydrothermal conditions

Capability of the recycling of high strength and high fracture toughness yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) sintered body utilizing “low-temperature annealing degradation” phenomenon was investigated. Hydrothermal treatment was employed to induce the phase transformation from tetragonal to monoclinic zirconia and to disintegrate the Y-TZP sintered body. 3 mol% Y₂O₃–ZrO₂ specimens sintered at 1,550 °C and more were disintegrated without leaving the original appearances when the treatment temperature was between 200 °C and 400 °C. The size of the disintegrated fragments of Y-TZP sintered body was much affected by hydrothermal treatment conditions. Only with hydrothermal treatment and simple ball milling, the sintered body was pulverized into the primary particle level. This technique is expected to apply to a sustainable recycling system for the zirconia ceramics, which restrains an energy consumption compared to crushing zirconia using mechanical procedures.     

An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances

While the matrix converter has many advantages that include bidirectional power flow, a size reduction, a long lifetime, and sinusoidal input currents, it is vulnerable to the input voltage disturbances, because it directly exchanges the input voltage to the output voltage. The instantaneous effective power control (IEPC) method has been proposed to compensate the input voltage disturbances, in which the instantaneous effective power is kept constant by controlling input current. However, to date, no method has been proposed to maintain the stability of the system with the IEPC. The purpose of this paper is to propose a method to control the stability of the system with IEPC. First, this paper explains the IEPC theoretically. Next, a model of the system with the IEPC is developed, and stability analyses are conducted. Then, based on the results of the analyses, a stability control method for the system with the IEPC is proposed. Furthermore, the validities of the proposed method are demonstrated by simulation and experiments. Finally, a restart performance of the system after momentary power interruption is discussed. Because the IEPC does not need phase-locked-loop to detect the phase angle of the input voltage, fast restart is expected     

Low-Force Electric Contact Processes on Cu Electrodes

A contact process between large-scale integration (LSI) pads and test probes at low contact force is a key to developing a probe card with smaller pitch and higher pin count. In this paper, we report on the characteristics of low-force contact methods on Cu electrodes. One is the fritting process, in which an electric breakdown is utilized to break the surface oxide, and the other is the heating treatment in hydrogen gas aimed at deoxidizing the surface Cu oxide. Conventional tungsten needle probes were used as testing probes, and contact resistances at low contact force of 1-5 mN were measured. Contact resistances smaller than 1 Omega were obtained by the fritting processes, in which the voltage and the current were 10 V and 280-320 mA, respectively. A deoxidization process at over 260degC was found to be effective for decreasing the contact resistance. The X-ray photoelectron spectroscopy (XPS) was utilized to investigate the surface state of hydrogen-treated Cu, and the deoxidization of Cu₂O to Cu was observed in samples treated at 260degC, while no change was found in that at 150degC.     

Numerical analysis method for the RC and geological structures subjected to extreme loading by energetic materials

This paper proposes and demonstrates a numerical simulation method suitable to analyze the local damage and dynamic response of the structures composed of the reinforced concrete (RC) and/or the geological materials subjected to extremely severe loading by the energetic material like high explosives (HE).     

Design principle of micromechanical probe with an electrostatic actuator for friction force microscopy

It is important to understand friction force in micro/nano mechanical devices both at high sliding speed and with high lateral resolution. Dual-axis friction force microscopes that can provide high lateral resolution and accuracy have been proposed; however, the sliding speed is limited by the probe scan speed. While a micro mechanical probe (MMP) with an electrostatic actuator can overcome this problem, details of probe design have not been established yet. This paper presents the principle of the mechanical design for an MMP with high force sensitivity and sufficient drive force. The dimensions of the double cantilever beam control the spring constants, resonant frequencies, and drive force. The use of an actuated MMP enables accurate friction force microscopy at high sliding speeds, which is required for the design of micro/nano mechanical devices.     

Investigation of Ozone Loss Rate Influenced by the Surface Material of a Discharge Chamber

Decay characteristics of ozone concentration in oxygen in a chamber with three types of wall material (stainless steel, copper, and aluminum) are measured using the 254 nm photoabsorption method. Effective lifetimes of ozone are estimated from decay curves of ozone concentration. These values depend on the wall material: They are largest for stainless steel and smallest for aluminum. The relationship between effective lifetime and gas pressure is investigated precisely to determine three values. The equivalent diffusion coefficient of ozone in oxygen and the reflection coefficient of ozone at the wall correspond to the loss rate of ozone at the wall. The collisional loss (quenching) rate coefficient of ozone in oxygen is also determined.     

Slot-coupled microstrip antenna with a triplate line feed whereparallel-plate mode is suppressed

In a slot-coupled microstrip antenna with a triplate line feed, the parallel-plate mode is excited by the slot, resulting in a decrease of radiation efficiency. The authors present a technique for suppressing the parallel-plate mode in this type of the antenna. Measured results confirm the effective performance of the proposed method     

A new circuit topology for continuous group delay synthesis

A new circuit topology is realized in order to synthesize group delay continuously. The circuit is based upon a new variable coupling coefficient coupled line section and a microstrip feedback loop. The new variable coupler is designed by periodically loading an edge coupled microstrip coupler. With this new design, coupling variation of more than 10 dB may be achieved. To the best of the authors knowledge, this is the first report of this type of microstrip coupler. The complete circuit consumes no do power and exhibits more than 500 ps of continuous variable true time delay. Insertion loss is better than 3 dB and return loss is better than 15 dB     

High performance liquid chromatographic separation of diacylglycerol acetates to quantitate disaturated species of lung phosphatidylcholine

A high-performance liquid chromatographic (HPLC) separation of diacylglycerol acetates to quantitatite disaturated species of lung phosphatidylcholine (PC) was studied. The diacylglycerol acetates were applied on a reversed phase column, eluted by an isocratic solvent, acetonitrile/isopropanol/water (35:15:1, v/v/v) at a flow rate of 1 ml/min, and detected by differential refractometry (RI). This isocratic HPLC method was useful to separate disaturated species from the others of lung PC. The quantitative analysis of the molecular species separated by HPLC was studied by RI detection. Chroamtograms obtained by RI detection and radioactivity determination of diacylglycerol [³H]acetates prepared by [³H]acetic anhydride were almost identical. The RI detector responsed in the same degree for different, authentic standards of diacylglycerol acetates. The detection limit with RI detection was about 30 nmoles. Molecular species of PCs from human lung and carcinoma tissues were analyzed by this HPLC method. The contents of disaturated species were very similar to those reported previously. These results indicate that RI detection is very useful in the nmole range for the quantitative analysis among the molecular species containing disaturated species.     

Polarizer with Nonrectangular Grooves in the HE11 Mode Transmission Line

This paper presents experimental results on polarizers with nonrectangular grooves to be used in high power millimeter wave transmission lines for electron cyclotron heating (ECH) of fusion plasmas. A low-power test at a frequency of 106.4 GHz has been carried out for several polarizers with different groove depths. The polarization characteristics experimentally measured are in good agreement with numerical results in which the actual groove shape functions are taken into account. This confirms the design optimization for future polarizer. Favorable results have also been obtained in a 400 kW-level high-power test for the polarizer installed in an ECH transmission line of the Heliotron-E plasma device.