Ultrasensitive immunoassay of protein biomarker based on electrochemiluminescent quenching of quantum dots by hemin bio-bar-coded nanoparticle tags

A hemin bio-bar-coded nanoparticle probe labeled antibody was designed by the assembly of antibody and alkylthiol-capped bar-code G-quadruplex DNA on gold nanoparticles and the interaction of hemin with the DNA to form a G-quadruplex/hemin bio-bar-code. An ultrasensitive immunoassay method was developed by combining the labeled antibody with an electrochemiluminescent (ECL) immunosensor for protein. The ECL immunosensor was constructed by a layer-by-layer modification of carbon nanotubes, CdS quantum dots (QDs), and capture antibody on a glassy carbon electrode. In air-saturated pH 8.0 PBS the immunosensor showed a carbon-nanotube-enhanced cathodic ECL emission of QDs. Upon the formation of immunocomplex, the ECL intensity decreased owing to the consumption of ECL coreactant in bio-bar-code electrocatalyzed reduction of dissolved oxygen. Using α-fetoprotein as model analyte, the quenched ECL could be used for immunoassay with a linear range of 0.01 pg mL(-1) to 1 ng mL(-1) and a detection limit of 1.0 fg mL(-1). The wide detection range and high sensitivity resulted from the enhanced ECL emission and highly efficient catalysis of the bio-bar-code. The immunosensor exhibited good stability and acceptable fabrication reproducibility and accuracy, showing great promise for clinical application.     

Growth of horizontally aligned dense carbon nanotubes from trench sidewalls

Horizontally aligned, dense carbon nanotubes (HADCNTs) in the form of CNT cantilevers/bridges were grown from selected trench sidewalls in silicon substrate by chemical vapor deposition (CVD). The as-grown CNT cantilevers/bridges are packed with multiwalled carbon nanotubes (MWCNTs) with a linear density of about 10 CNTs μm(-1). The excellent horizontal alignment of these CNTs is mainly ascribed to the van der Waals interactions within the dense CNT bundles. What is more, the Raman intensity ratio I(G)/I(D) shows a gradual increase from the CNT roots to tips, indicating a defect gradient along CNTs generated during their growth. These results will inspire further efforts to explore the fundamentals and applications of HADCNTs.     

Devolatilization of oil sludge in a lab-scale bubbling fluidized bed

Devolatilization of oil sludge pellets was investigated in nitrogen and air atmosphere in a lab-scale bubbling fluidized bed (BFB). Devolatilization times were measured by the degree of completion of the evolution of the volatiles for individual oil sludge pellets in the 5-15 mm diameter range. The influences of pellet size, bed temperature and superficial fluidization velocity on devolatilization time were evaluated. The variation of devolatilization time with particle diameter was expressed by the correlation, τ(d) = Ad(p)(N). The devolatilization time to pellet diameter curve shows nearly a linear increase in nitrogen, whereas an exponential increase in air. No noticeable effect of superficial fluidization velocity on devolatilization time in air atmosphere was observed. The behavior of the sludge pellets in the BFB was also focused during combustion experiments, primary fragmentation (a micro-explosive combustion phenomenon) was observed for bigger pellets (>10mm) at high bed temperatures (>700 °C), which occurred towards the end of combustion and remarkably reduce the devolatilization time of the oil sludge pellet. The size analysis of bed materials and fly ash showed that entire ash particle was entrained or elutriated out of the BFB furnace due to the fragile structure of oil sludge ash particles.     

A stacked memory device on logic 3D technology for ultra-high-density data storage

We have demonstrated, for the first time, a novel three-dimensional (3D) memory chip architecture of stacked-memory-devices-on-logic (SMOL) achieving up to 95% of cell-area efficiency by directly building up memory devices on top of front-end CMOS devices. In order to realize the SMOL, a unique 3D Flash memory device and vertical integration structure have been successfully developed. The SMOL architecture has great potential to achieve tera-bit level memory density by stacking memory devices vertically and maximizing cell-area efficiency. Furthermore, various emerging devices could replace the 3D memory device to develop new 3D chip architectures.     

Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst

Waste water of copper mines and copper processing plant contains both copper and selenium ions with other contaminants. In this paper simultaneous photoreductive removal of copper (II) and selenium (IV) is studied for the first time using spherical binary oxide photocatalysts under visible light. All the synthesized materials are found to be mesoporous in nature with reasonably high surface area. Among a range of hole scavengers, only EDTA (ethylene diamine tetraacetic acid) and formic acid are found to be the most active for the reduction reaction. A comparative study is carried out using both the hole scavengers varying reaction time, concentration, pH etc. For a single contaminant, EDTA is found to be the best for Cu(II) reduction whereas formic acid is the best for Se(IV) reduction. In a mixed solution both EDTA and formic acid perform very well under visible light irradiation. Highest photocatalytic reduction in a mixed solution is observed at pH 3. Among all the synthesized materials, TiZr-10 performs as the best photocatalyst for both Cu(II) and Se(IV) reduction. However under UV light, Degussa P25 performs slightly better than TiZr-10. Present study shows that 100 ppm of mixed solution can be removed under visible light in 40 min of reaction using TiZr-10 as catalyst. Photodeposited material is found to be copper selenide rather than pure copper and selenium metal. This indicates that the waste water containing copper and selenium ions can be efficiently treated under visible or solar light.     

Photosensitized degradation in water of the phenolic pesticides bromoxynil and dichlorophen in the presence of riboflavin, as a model of their natural photodecomposition in the environment

Within the context of environmentally friendly methods for the elimination of surface-water pollutants, the photodegradation of the phenolic pesticides bromoxynil (BXN) and dichlorophen (DCP) under simulated natural conditions has been studied. The work was done in the presence of the visible-light absorber photosensitizer riboflavin (Rf), usually present in trace quantities in natural waters. Under aerobic conditions, an efficient photooxidation of both pesticides was observed. The relatively intricate photochemical mechanism involves pesticide and oxygen consumption and, to a lesser extent, Rf degradation. The kinetic and mechanistic study supports that both H(2)O(2) and singlet molecular oxygen, O(2)((1)Δ(g)), are involved in the process. Kinetic data for the O(2)((1)Δ(g))-mediated oxidation indicate that BXN and DCP are photodegraded with this species faster than the parent compound phenol, very frequently employed as a model for aquatic contaminants, likely due to their lower pK(a) values. This observation allows the design of phenolic pesticides with different photodegradation rates under environmental conditions.     

Measurement of cosmic-ray neutron dose onboard a polar route flight from New York to Seoul

Exposure to cosmic radiation in operation of a jet aircraft is considered to be a part of the occupational exposure. Cosmic radiation doses received in aviation are generally evaluated by numerical model simulations. The precision of the model calculation should be verified by measurements. From the viewpoint of radiological protection, neutrons are the most contributing radiation component and have to be precisely measured. Neutron measurements were thus performed in a long-haul flight using a relatively new transportable neutron monitor (WENDI-II) which responds fairly well to the cosmic-ray neutrons. The in-flight measurement was carried out on 5-6 November 2009 on a polar route flight from New York/John F. Kennedy airport to Seoul/Incheon airport. The flying time was ~14 h. The observations obtained as 1 cm ambient dose equivalent were compared with model calculations using a computer program developed by the authors for the calculation of aviation route doses 'JISCARD EX'. Good agreements between the measured and calculated values were observed over the polar route where the geomagnetic cut-off rigidity is the lowest.     

Pinpointing biomarkers in proteomic LC/MS data by moving-window discriminant analysis

The identification of differential patterns in data originating from combined measurement techniques such as LC/MS is pivotal to proteomics. Although "shotgun proteomics" has been employed successfully to this end, this method also has severe drawbacks, because of its dependence on largely untargeted MS/MS sequencing and databases for statistical analyses. Alternatively, several MS-signal-based (MS/MS-independent) methods have been published that are mainly based on (univariate) Student's t-tests. Here, we present a more robust multivariate alternative employing linear discriminant analysis. Like the t-test-based methods, it is applied directly to LC/MS data, instead of using MS/MS measurements. We demonstrate the method on a number of simulated data sets, as well as on a spike-in LC/MS data set, and show its superior performance over t-tests.     

Enhancement of gas sensing properties of CdS nanowire/ZnO nanosphere composite materials at room temperature by visible-light activation

CdS nanowire/ZnO nanosphere materials (CdS/ZnO) with hierarchical structure were synthesized by a three-step solvothermal process. XRD, FESEM and TEM analysis confirmed the growth of ZnO nanospheres on the surface of CdS nanowires (NWs). The transient photovoltage (TPV) measurements revealed that the interface between CdS and ZnO can inhibit the recombination of photogenerated excess carriers and prolong the lifetime of excess carriers in CdS/ZnO materials. Moreover, the CdS/ZnO materials exhibit a dramatic improvement in optoelectronic performance and visible-light-irradiation gas sensing activity, which gave 1 order of magnitude larger than that of CdS NWs in response to formaldehyde. The enhancement of sensing properties is attributed to the interfacial transport of excess carriers.