Singly ionized double-donor complex in vertically coupled quantum dots

ABSTRACT: The electronic states of a singly ionized on-axis double-donor complex (D2+) confined in two identical vertically coupled, axially symmetrical quantum dots in a threading magnetic field are calculated. The solutions of the Schrodinger equation are obtained by a variational separation of variables in the adiabatic limit. Numerical results are shown for bonding and antibonding lowest-lying artificial molecule states corresponding to different quantum dot morphologies, dimensions, separation between them, thicknesses of the wetting layers, and magnetic field strength.     

HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3-Al2O3 system

The crystallization process of the eutectic composition of GdAlO_3-Al_2O_3 from the amorphous phase prepared by rapid-quenching of melt that leads to the formation of a cantaloupe skin-like microstructure was investigated using focused ion-beam scanning electron microscopy (FIB-SEM) and high-resolution transmission electron microscopy (HR-TEM).The amorphous films were heat-treated at temperatures between 1000 °C and 1500 °C for up to 30min to form the eutectic phases of GdAlO_3 and Al_2O_3.The GdAlO_3 and Al_2O_3 crystal phases that formed from the amorphous phase were identified by FIB-SEM and HR-TEM.Both components began to crystallize and grow from the amorphous phase separately at different temperatures.The formation process of these crystal phases was different from that of the ordinary eutectic microstructure solidified from the GdAlO_3-Al_2O_3 system.Therefore,the observed structure is termed "eutectic-like" for distinction.The microstructures formed from the amorphous phases at sufficiently high temperatures consisted of ultra-fine microstructures of individually crystallized components and were similar to ordinary eutectic microstructures.By heat-treating the amorphous films at 1500 °C for either 2 min,8min or 30min,the ultra-fine components of GdAlO_3 and Al_2O_3 were found to crystallize following a eutectic-like stage after 8min of heat treatment.     

(Computer) Vision without Sight

Computer vision holds great promise for helping persons with blindness or visual impairments (VI) to interpret and explore the visual world. To this end, it is worthwhile to assess the situation critically by understanding the actual needs of the VI population and which of these needs might be addressed by computer vision. This article reviews the types of assistive technology application areas that have already been developed for VI, and the possible roles that computer vision can play in facilitating these applications. We discuss how appropriate user interfaces are designed to translate the output of computer vision algorithms into information that the user can quickly and safely act upon, and how system-level characteristics affect the overall usability of an assistive technology. Finally, we conclude by highlighting a few novel and intriguing areas of application of computer vision to assistive technology.     

致密型MoB-CoCr涂层在钢铁工业中滚镀锌生产线中的应用

MoB/CoCr涂层具有较高的耐熔融锌侵蚀的能力,并被广泛地应用于钢铁工业镀锌生产线中[1].然而在实验室测试中,这种涂层有时还没有显示出其原有特性就失效了.研究发现,这些失效的试样往往具有较高的孔隙率,导致了熔融Zn通过孔洞加速渗透对基体钢材产生腐蚀并使涂层脱离.这表明,在实际应用中,高密度涂层对于展现其耐蚀性与保证质量的极度重要性.在本文中,我们通过优化粉末性能并采用JP-5000超音速火焰喷涂制备了高密度MoB/CoCr涂层.我们通过盐雾试验来评估涂层的致密性.最佳密度的涂层在经过300小时的盐雾试验后,其低碳钢基体材料没有发生锈蚀.另一方面,多孔的涂层在经过24～48小时的盐雾试验后,其基体材料出现了锈蚀.经盐雾试验验证的最佳涂层在工业镀锌浴中浸没90天后（＞2000小时）没有发生失效.     

Nanoemulsion-based delivery systems for poorly water-soluble bioactive compounds: Influence of formulation parameters on Polymethoxyflavone crystallization

Polymethoxyflavones (PMFs) extracted from citrus peel exhibit potent anti-cancer activity, but are highly hydrophobic molecules with poor solubility in both water and oil at ambient and body temperature, which limits their bioavailability. The possibility of encapsulating PMFs within nanoemulsion-based delivery systems to facilitate their application in nutraceutical and pharmaceutical products was investigated. The influence of oil type (corn oil, MCT, orange oil), emulsifier type (β-lactoglobulin, lyso-lecithin, Tween, and DTAB), and neutral cosolvents (glycerol and ethanol) on the formation and stability of PMF-loaded nanoemulsions was examined. Nanoemulsions (r < 100 nm) could be formed using high pressure homogenization for all emulsifier types, except DTAB. Lipid droplet charge could be altered from highly cationic (DTAB), to near neutral (Tween), to highly anionic (β-lactoglobulin, lyso-lecithin) by varying emulsifier type. PMF crystals formed in all nanoemulsions after preparation, which had a tendency to sediment during storage. The size, morphology, and aggregation of PMF crystals depended on preparation method, emulsifier type, oil type, and cosolvent addition. These results have important implications for the development of delivery systems for bioactive components that have poor oil and water solubility at application temperatures.     

Inertial Waves Occurring in a Liquid Metal Column due to Pulsed Excitation by a Rotating Magnetic Field

We present an experimental study concerning the flow inside a liquid metal column exposed to a pulsed rotating magnetic field.This paper is aimed at highly resolved,quantitative velocity measurements in the eutectic GalnSn alloy.A novel ultrasound Doppler system was used two measure two-dimensional velocity fields of the secondary flow in the radial-meridional plane.It employs an array of 25 transducer elements allowing a fast electronic traversing with concurrently high spatial and temporal resolution.The measurements revealed transient flow regimes showing distinct inertial oscillations and coherent vortex structures.The results demonstrate that the arising flow structure depends sensitively on the frequency of the RMF pulses.A maximum intensity of a periodic meridional flow can be observed,if the corresponding pulse frequency fp relates to the eigenperiod of the respective inertial mode in a developed regime.The electromagnetic stirring method that uses a modulated RMF offers considerable potential to enhance the stirring efficiency and to optimize the properties of castings by a well-aimed flow control during solidification.     

纺织助剂中的甲醛测定

基于更为严厉的甲醛重新分类的背景,TEGEWA协会整理工作组已开发出一种可确定纺织助剂中游离甲醛含量的新方法。目前此法鉴于其统一的程序,可使因不同的内部测试方法而得出不同观点的测试成为过去。     

改进平煤方法 减少装煤烟尘

由于焦炉在装煤是会产生在大量烟尘，即使采用了最先进的技术，装煤方法仍是炼焦工业控制污染的关键手段之一，目前，正在实施控制焦米装煤时烟放散新方法的开发计划，现将该计算的第一部分，即平煤方法的改进情况介绍如下。