High performance laser with nanopatterned active layer by selective area epitaxy

Lasers containing a nanopatterned active layer demonstrating excellent threshold characteristics are presented. The nanopatterned active layer is fabricated using high-resolution electron beam lithography and selective-area metal organic chemical vapour deposition crystal growth. Results demonstrating an order of magnitude improvement over previous results are reported.     

Antimony activities in copper mattes

A mass spectrometric technique combined with a double Knudsen cell was used to determine the antimony and copper activities in the Cu-Sb binary system at 1373 K and in the two-melt composition range of the Cu−S−Sb ternary system at 1423 K. The antimony and copper activities were calculated based on the intensity ration of the gaseous Sb and Cu species, over the unknown and known activity samples, respectively. γ _Sb ^o were found to be 1.1×10⁻² in molten copper at 1373 K, and 1.8×10⁻² and 0.44 in a copper-rich phase and in a matter phase, of the Cu−S−Sb ternary system at 1423 K, respectively. These values indicate, that antimony can be removed during the matte smelting and slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper at 1423 K were calculated and found to be 10.7, −5.4, and 6.3 for ε _Sb ^Sb · ρ_Sb ^Sb, and ε _Sb ^S , respectively. M. HINO, formerly Visiting Scientist at the University of Toronto     

Microwave time domain reflectometry

A new time domain reflectometry algorithm is presented. It is intended for identification of the impedance profile of the non-uniform lossless transmission line. Experimental results are presented to illustrate the validity of this new technique.     

Self-Adapting Linear Algebra Algorithms and Software

One of the main obstacles to the efficient solution of scientific problems is the problem of tuning software, both to the available architecture and to the user problem at hand. We describe approaches for obtaining tuned high-performance kernels and for automatically choosing suitable algorithms. Specifically, we describe the generation of dense and sparse Basic Linear Algebra Subprograms (BLAS) kernels, and the selection of linear solver algorithms. However, the ideas presented here extend beyond these areas, which can be considered proof of concept.     

Processing techniques for particulate-reinforced metal aluminium matrix composites

The critical need for high strength, lightweight and high stiffness materials has, in recent years, resurrected much interest in discontinuously reinforced powder metallurgy metal matrix composites. These hybrid materials have combined both standard wrought alloys of aluminium and a wide variety of discontinuous reinforcements such as particulates and whiskers of ceramic materials. Renewed interest in these materials as attractive candidates for use in the aerospace and transportation industry has resulted from an attractive and unique combination of physical and mechanical properties, and an ability to offer near isotropic properties coupled with the low cost of these materials when compared with existing monolithic materials. In this paper, the primary processing categories for discontinuously-reinforced metal-matrix composites are highlighted and the salient features of the various techniques in each category are discussed. The variables involved in each processing technique are examined, and the influence of alloy chemistry highlighted. Novel processing techniques for these materials such as the variable co-deposition method is presented as a means to process these novel engineering materials in order to improve their overall mechanical performance.     

The microstructures of laser-alloyed Ni-Ta surface layers

Evaporated thin tantalum films on single and polycrystalline nickel have been laser surface alloyed using either continuous-wave CO₂ or Q-switched Nd-YAG radiation. In the case of the continuous-wave laser, surface alloys contain amorphous tantalum-rich regions, intermediate polycrystalline bands of TaNi, and an underlying Ni(Ta) solid solution. In the Q-switched laser case, a much more laterally uniform amorphous phase with approximately equal atomic fractions of nickel and tantalum is found, with little evidence of polycrystalline intermetallics.In situ annealing with the electron beam of the microscope results in formation of microcrystallites, predominantly nickel.     

Use of colloidal ruthenium particles in the electrochemical reduction of benzene by solvated electrons

Ruthenium colloidal particles prepared by the decomposition of a ruthenium acid sulfite complex increased the electrochemical reduction of benzene from 45% to 60% at room temperature and 10 psig of hydrogen. The reduction was carried out in a 21 mole % ethanol - 79 mole % hexamethylphosporamide. The significant increase in the percent of benzene reduced was accompanied by an apparent current efficiency of 98%. Comparison with analogous experiments employing colloidal platinum particles indicates that the above increase in benzene reduction can be attributed to direct catalytic hydrogenation by the ruthenium.     

Relationship between structure parameters and chemical properties in some MPS3 layered phases

Cationic thermal motions in the MPS₃ have been related to substitution abilities in this layer family. They have also been correlated to the crystal field stabilization energy. These considerations explain why some MPS₃ materials may or may not undergo a low temperature substitution intercalation reaction. From interatomic distances comparisons, the bond between (PS₃) groups in the anionic (P₂S₆)^4? octahedra, is found to be easily stretched upon cation substitution. Cationic radii follows the expected variation according to their high spin configuration in octahedral sulfur environment.     

The preparation of high purity Mg2Ni

The intermetallic compound Mg₂Ni has been prepared by the vapour exchange/diffusion reaction of the elements sealed in a stainless steel container. The product has been characterised by powder X-ray diffractometry with Mo-K_α radiation, using step-scanning and profile refinement techniques. The hexagonal unit cell has constants a = 5.2117(4), $\text{c}\text{= 13.2538(9)}\text{A}\text{?}$.     

Olfactory discrimination of individual littermates in rats (Rattus norvegicus).

Tested the ability of 4 adult male Sprague-Dawley rats to use odors in discrimination among littermates living as a group. Ss were trained in a Y-maze to discriminate the presence of a littermate from its absence. Results from transfer of training in 3 subsequent testing periods indicated that the animals were capable of distinguishing among individuals when relatedness and familiarity were held constant, that this ability was not due to training, and that performance was based solely on odor cues. Results suggest that laboratory rats exhibit odor sensitivities conmensurate with very complex social processes. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)