Increasing the efficiency of metal-air current sources operating in a pulse-train mode

A considerable (～1.4-fold) increase in the average output power of a chemical current source has been achieved by means of a periodic pulsed manipulation of the load. A scheme used for the pulse-train loading is presented and mechanisms ensuring an increase in the average output power of the current source are considered.     

Fast microwave detection system for coherent synchrotron radiation study at KEK: Accelerator test facility

A fast room temperature microwave detection system based on the Schottky Barrier-diode detector was created at the KEK ATF (Accelerator Test Facility). It was tested using Coherent Synchrotron Radiation (CSR) generated by the 1.28 GeV electron beam in the damping ring. The speed performance of the detection system was checked by observing the CSR from a multi-bunch (2.8 ns bunch separation time) beam. The theoretical estimations of CSR power yield from an edge of bending magnet as well as new injection tuning method are presented. A very high sensitivity of CSR power yield to the longitudinal electron distribution in a bunch is discussed.     

Properties of gasars-metallic materials with pores formed by released hydrogen

We developed a new type of porous materials with anisotropic structure based on a large number of metals. It is shown that these material, called gasars, have properties different from the properties of the other porous materials. Thus, the strength of gasars is much higher than the strength of powder materials with the same porosity and their impact toughness is readily regulated by the sizes of the pores. The internal structures of gasars and possible versions of the types of pores in these materials are strongly diversified, which makes the spectrum of their possible applications very wide. We discuss some specific directions of the potential applications of gasars. The results of measurements of the thermal conductivity of gasars and monolithic specimens are presented. It is shown that, for a certain level of porosity, the specific thermal conductivity of gasars is higher than for monolithic materials. We also make some basic conclusions concerning the characteristics of new porous materials. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 125–127, September–October, 2007.     

Converting harmonic oscillations into chaos

A new simple model of a system with chaotic dynamics, based on the equations of bistable systems, is considered. The possibility of converting harmonic signals into chaotic oscillations, which represent intermittent irregular and switching quasi-regular motions, is demonstrated by numerical methods. The mechanism of chaotization is analyzed using the results of numerical calculations.     

Propagation of strain waves and compaction of a viscoelastic material by a cylinder rolling over it

This paper considers problems on the rolling of rigid driven and driving cylinders slipping on a compactible viscoelastic base. As a result of the investigation of the process of propagation of viscoelastic decaying strain waves in a deformable medium caused by a cylinder rolling over it and the action of the sliding friction forces, formulas and calculation algorithms have been obtained for determining the indices of the stressed-strained state and compactness of the base, the rolling resistance of the driven and diving cylinders, and the driving force of the driving cylinder. Calculations of these indices have been performed for the cases of cylinders rolling over a soil whose viscoelastic properties have been investigated experimentally. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 5, pp. 122–132, September–October, 2007.     

A threshold temperature effect for a carbon particle heated in plasma

Numerical simulations of the heating of a carbon dust particle (pellet) in hydrogen plasma showed that the character of heating depends in a threshold manner on the initial temperature of the pellet. The heating proceeds at a high rate if the initial temperature is above a certain threshold (“hot” regime), and at a much lower rate for an initial temperature below this threshold (“cold” regime). An important factor in this process is thermionic emission, which leads to positive charging of a pellet in hydrogen plasma due to electron emission from the surface in the hot regime. In the cold regime, the pellet acquires a negative charge that retards the electron flux from plasma to the particle. A method for the experimental observation of this effect is proposed.     

Scene segmentation using neuromorphic oscillatory networks

Using the neuromorphic approach, we propose an analog very large-scale integration (VLSI) implementation of an oscillatory segmentation algorithm based on local excitatory couplings and global inhibition. The original model has been simplified and adapted for its efficient VLSI implementation while preserving its segmentation properties. To demonstrate the feasibility of the approach, a 16/spl times/16-pixel testchip has been manufactured. Extensive experimental results demonstrate that it can properly segment binary images. Power consumption, segmentation time per cell, and system complexity are very low compared to other hardware and software implementation schemes. We also show two main differences between the original algorithm and the analog approach. First, the network is noise tolerant without the need of additional elements and second, delays between oscillators due to the combination of mismatch and output capacitances have to be accounted for network performance.     

The structure and thermo EMF of a nanotubular carbon deposit formed in electric discharge plasma

We have studied the structure and thermo emf of a nanotubular carbon deposit formed in electric arc discharge plasma. The deposit contains flocky granules with dimensions of 15–20 μm within a 20–60 μm-thick layer on the substrate surface. This deposit is characterized by a sufficiently high thermo emf (60 μV/K) and electric conductivity (600 Ω⁻¹ m⁻¹).     

Diversity training in graduate school: An exploratory evaluation of the Safe Zone project.

How can psychologists and graduate students become more affirmative of lesbian, gay, bisexual, and transgender (LGBT) issues? Safe Zone is a diversity-training program to increase sensitivity toward, knowledge of, and advocacy for LGBT populations and issues that affect them. In this exploratory study, the implementation of Safe Zone is described within a school of professional psychology; its effectiveness was assessed by self-reported behavioral and attitudinal changes and from participant evaluations. Results were encouraging with regard to the goals of Safe Zone and its adaptation to institutions interested in improving relations with the LGBT community, but additional empirical studies are needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Results of benchmark calculations based on OLHF-1 test

The subject of this paper is to compare the results of the different calculations performed by the benchmark participants in the framework of the OECD Lower Head Failure (OLHF) program. The benchmark consists in the finite element (FE) calculation or in analytical calculations of the mechanical behavior of the OLHF-1 experiment. Seven participants from six countries and seven companies or organizations (AVN, VTT, GRS, UJV, SNL, IPSN and CEA) have performed the benchmark.The OLHF experiment program extends the NRC-sponsored SNL LHF program (NUREG/CR-5582) completed in 1998: these experiments where intended to simulate the thermal/mechanical loads to a 1/4.85-scale model of a reactor pressure vessel. The pressure vessel material (SA533B1 steel) used in these experiments is prototypic of reactor PWR vessel material and has been well characterized by material property testing as part of this program. The OLHF tests advance the results of the previous testing program by examining the effects of large temperature differences across the vessel wall. Large temperature differences in excess of 150–400 K are more prototypic of accident conditions.Most of the participants performed 2-D axisymmetric analyses and doesn’t study the crack opening. The global mechanical behaviour of OLHF-1 experiment is well represented but prediction of the maximum vertical displacement is not in good agreement with the experimental value. Failure time and location are in quite good agreement with experimental results but large discrepancies are observed on the mode of failure: creep or plasticity. To improve predictions, more investigation and work is needed on the choice of the failure criteria and failure mode.