Development of an empirical mathematical model for describing and optimizing the hygiene potential of a thermophilic anaerobic bioreactor treating faeces.

Poor sanitation and insufficient disposal of sewage and faeces are primarily responsible for water associated health problems in developing countries. Domestic sewage and faeces are prevalently discharged into surface waters which are used by the inhabitants as a source for drinking water. This paper presents a decentralized anaerobic process technique for handling of such domestic organic waste. Such an efficient and compact system for treating faeces and food waste may be of great benefit for developing countries. Besides a stable biogas production for energy generation, the reduction of bacterial pathogens is of particular importance. In our research we investigated the removal capacity of the reactor concerning pathogens, which has been operated under thermophilic conditions. Faecal coliforms and intestinal enterococci have been detected as indicator organisms for bacterial pathogens. By the multiple regression analysis technique an empirical mathematical model has been developed. The model shows a high correlation between removal efficiency and both, hydraulic retention time (HRT) and temperature. By this model an optimized HRT for defined bacterial pathogens effluent standards can be easily calculated. Thus, hygiene potential can be evaluated along with economic aspects. In this paper not only results for describing the hygiene potential of a thermophilic anaerobic bioreactor are presented, but also an exemplary method to draw the right conclusions out of biological tests with the aid of mathematical tools.     

Developments in high-resolution positron emission tomography at MGH

The development of high resolution PET systems is important for the wider application of this techniques. The resolution of PET is limited by a number of physical factors such as positron range, small angle deviation, and sampling frequency. The design of the detector array and its sensitivity remain critical factors; designs incorporating analog coding have proven to be useful. PCR-I, a single plane PET system, has demonstrated the concept and has produced useful images in animal studies. PCR-II will extend the concept to a two dimensional detector array resulting in a system with high resolution and high sensitivity.     

Multi-H phase-coded modulations with asymmetric modulationindexes

Multi-H phase-coded modulation (MHPM) is a bandwidth-efficient modulation scheme which offers substantial coding gain over conventional digital modulation schemes. MHPM with asymmetric modulation indices corresponding to the bipolar data +1 and -1 is considered, and numerical results for the minimum Euclidean distances are provided. It is shown that performance improvements on the error probability over conventional MHPM are gained with essentially the same bandwidth and a very slight modification in implementation. The upper bounds on the error probabilities as functions of observation intervals and received E_b/N₀ are also investigated in detail. It is concluded that the concept of asymmetric modulation indices for MHPM is attractive for bandwidth and power-efficient modulation     

Construction of transmission lines above valuable standing timber

Problems with the construction of transmission lines above a forest are examined. Construction of lines above standing timber makes it possible to shorten the length of the route, eliminate the clearing of a continuous swath along the line, and reduce the volume of in-service work. To implement this solution, it is necessary to introduce changes and supplements to existing regulatory technical documents. __________ Translated from élektricheskie Stantsii, No. 10, October 2007, pp. 48–51.     

Adaptive control of diamond drilling of nonmetallic materials

The basic principles for selecting the work regimes for diamond drilling of nonmetallic materials are presented. The process of microcutting by a single diamond grain is examined, and relations between the components of the cutting force and the ratio of the rate of the main motion to the feed rate are obtained on the basis of known relationships. It is shown that adaptive control of the drilling nonmetallic materials is possible using two-circuit systems — one for feed-rate control and one for cutting-rate. __________ Translated from Steklo i Keramika, No. 3, pp. 28–30, March, 2007.     

Double-step generation of ellipses

The principle of double-step incremental generation of nonparametric curves on a discrete plane is used to develop a double-step algorithm for scan converting ellipses in sixteen separate segments. The algorithm iterates only half as many times as current algorithms, while each iteration demands the same number of operations or slightly fewer operations than M. Pitteway's (1967, 1985) algorithm (previously the fastest one). This marked gain in the speed of scan conversion is due to the fact that the middle pixel in a two-step increment is obtained without computation     

Studies on curcumin and curcuminoids. VI. Kinetics of curcumin degradation in aqueous solution

The kinetics of the pH-dependent degradation of curcumin has been investigated. A plot of the rate constant against pH indicates the pKa values of the acid protons. The graph also indicates the complexity of the curcumin degradation.     

The economic impact of uncertainties associated with energy-saving technologies

We will analyze the economic sensitivity of new energy-saving technologies to weather, future energy price, and system lifetime uncertainties. Graphical rate of return analysis is employed. A representative residential solar water heating investment is analyzed to illustrate the impact of uncertainties. The wide range of reasonable rates of return found suggests some considerations for policy makers and some areas of future research.     

A REVIEW OF TEXTURAL DEFECTS IN COOKED RECONSTITUTED LEGUMES —THE INFLUENCE OF STRUCTURE AND COMPOSITION

Legumes provide an important part of the world's protein requirements, as well as other nutrients, but they are underutilized as food. A major factor limiting expanded consumption is storage induced textural defects that prolong cooking time and demand correspondingly higher energy requirements for preparation. These defects, including the hard-to-cook phenomenon and hardshell, are initiated by structural and compositional factors but can be at least partially controlled by storage and processing conditions. Structural components implicated include seed coat, cell walls, middle lamella, starch granules and membranes while, compositionally, proteins, carbohydrates, phytate, polyphenols and lignin may also be important. Methods of texture measurement of legumes, including mechanical, physical and sensory properties are reviewed. The most commonly held hypothesis for the mechanism of the hard-to-cook defect states that beans fail to soften after exposure to high temperature and humidity storage because the increased water activity potentiates phytase which hydrolyzes phytate, rendering it no longer capable of chelating the Ca⁺⁺ and Mg⁺⁺ ions of the middle lamella and, hence, undissoluble. More recent evidence, however, provides potential roles for lignification, starch gelatinization and perhaps other mechanisms depending upon conditions. The possibility of a nonenzymatic as well as an enzymatic route is raised and thoughts presented on a course of action for future research.