Rapid thermal chemical vapor deposition of in-situ boron doped polycrystalline SIxGe1-x

In-situ doped polycrystalline Si_xGe_1-x (x = 0.7) alloys were deposited by rapid thermal chemical vapor deposition (RTCVD) using the reactive gases SiH₂Cl₂, GeH₄ and B₂H₆ in a H₂ carrier gas. The depositions were performed at a total pressure of 4.0 Torr and at temperatures 600° C, 650° C and 700° C and different B₂H₆ flow rates. The conditions were chosen to achieve high doping levels in the deposited films. Our results indicate negligible effect of B₂H₆ flow on the deposition rate. The depositions follow an Arrhenius type behavior with an activation energy of 25 kcal/mole. Boron incorporation in the films was found to follow a simple kinetic model with higher boron levels at lower deposition rates and higher B₂H₆ flow rates. As-deposited resistivities as low as 2 mΩ-cm were obtained. Rapid thermal annealing (RTA) in the temperature range 800-1000° C was found to reduce the resistivity only marginally due to the high levels of boron activation achieved during the deposition process. The results indicate that polycrystalline Si_xGe_1-x films can be deposited by RTCVD with resistivities comparable to those reported for in-situ doped polysilicon.     

Vergleich der Extrakte und des Lignins aus frischem und gelagertem Kiefernholz (Pinus sylvestris L.)

The degradation processes of the extractives of pine wood caused by aging are only noticeable in the heartwood. In seasoned sapwood the percentages of the water extracts and the cyclohexane-ethanol extract increase compared with the green sample; the alkali extracts, however, do not vary. The contents of acid lignin as well as the UV and IR spectra of MWL do not show differences. The amount of OCH₃/C₉ is in all samples 0.96, but the degree of oxidation is higher in the seasoned wood than in the green one.     

Computer-aided design in mechanisms

The man-machine dialog is very important for the design process. In this paper a program system, based on the minicomputer KRS 4201 (ROBOTRON), is demonstrated by using an interactive graphical screen. This program system provides the opportunity to analyze and synthesize mechanisms up to 16 links. The application is demonstrated by designing a front-loader-system for a truck. Real-time animation of seven-bar linkages and coupler curves, including velocity and acceleration, are shown.     

Formation of droplets on Si surfaces bombarded by In from a capillary type liquid metal ion source

Droplet formation on Si surfaces bombarded by 10 keV beams from a liquid metal indium ion source has been observed. It has been verified that excess indium is transported in the ion beam, probably in the form of charged droplets. SIMS, SEM and RBS techniques have been used to study the distribution of droplets at the surface. At the specified ion source operating conditions, equilibrium droplet coverage is of the order of 25%. Individual droplets have an average diameter of 0.35 ωm and an average height of 2.2 nm. At a bombardment current density of 0.1 mA cm^?2, equilibrium coverage is reached in about 1 s.     

Windenergieausbau als Teil der Ökostromentwicklung

The new law for the support of electricity produced by renewable sources in Austria (Ökostromgesetz) which came into force with the beginning of 2003, shows its impacts already after the first months. Investments into wind power have increased considerably. These will be accompanied by activities for electricity production by biomass and biogas. The 4%-target quota will probably be reached earlier than the 2008 target period of the law.     

Schätzung der modalen Parameter unter Berücksichtigung systematischer Fehler der Frequenzgänge

Zusammenfassung Aufgrund von Eingangs- und Ausgangsst?rungen des Me?systems sowie einer endlichen Frequenzaufl?sung treten stets systematische (Bias-) und zuf?llige Fehler bei gemessenen Frequenzg?ngen und deren Varianzen auf. Auf solchen Frequenzg?ngen und Varianzen beruhende Sch?tzungen der modalen Parameter sind damit ebenfalls systematisch verzerrt. Um die Genauigkeit und Sicherheit der modalen Parameter zu erh?hen, wird ein Sch?tzverfahren vorgestellt, in dem der Einflu? der Biasfehler auf die Sch?tzung n?herungsweise in einer diagonalen Wichtungsmatrix berücksichtigt wird. Es wird gezeigt, da? die systematischen Fehler Einflu? auf die Absch?tzung der statistischen Sicherheit der modalen Parameter haben. Anhand zweier Beispiele wird die Wirksamkeit des Sch?tzverfahrens demonstriert. Prof. Dr.-Ing. Dr.-Ing. E.h.H.K. T?nshoff: Dipl.-Ing.Z. Liu, Institut für Fertigungstechnik und Spanende Werkzeugmaschinen (IFW), Universit?t Hannover.     

Selectivity in Methanol Oxidation as Studied on Model Systems Involving Vanadium Oxides

Oxidation catalysts are modeled by oxide single crystals, thin oxide films, as well as supported oxide nanoparticles. We characterize the surface of those materials using a variety of surface sensitive techniques including scanning tunneling microscopy and spectroscopy, photoelectron spectroscopy, infrared spectroscopy, and thermal desorption spectroscopy. We find temperature dependent structural transformations from V₂O₅(001) to V₂O₃(0001) via V₆O₁₃(001). V₂O₃(0001) is found to be vanadyl terminated in an oxygen ambient and it loses the vanadyl termination after electron bombardment. It is shown that the concentration of vanadyl groups controls the selectivity of the methanol oxy-dehydrogenation towards formaldehyde. A proposal for the mechanism is made. The results on single crystalline thin films are compared with similar measurements on deposited vanadia nanoparticles. The experimental results are correlated with theoretical calculations and models.     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.