Applications of one-cycle control to improve the interconnection of a solid oxide fuel cell and electric power system with a dynamic load

Adding distributed generation (DG) is a desirable strategy for providing highly efficient and environmentally benign services for electric power, heating, and cooling. The interface between a solid oxide fuel cell (SOFC), typical loads, and the electrical grid is simulated in Matlab/Simulink and analyzed to assess the interactions between DG and the electrical grid. A commercial building load profile is measured during both steady-state and transient conditions. The load data are combined with the following models that are designed to account for physical features: a One-Cycle Control grid-connected inverter, a One-Cycle Control active power filter, an SOFC, and capacitor storage. High penetration of DG without any power filter increases the percentage of undesirable harmonics provided by the grid, but combined use of an inverter and active power filter allows the DG system interconnection to improve the grid tie-line flow by lowering total harmonic distortion and increasing the power factor to unity.     

A novel flow battery—A lead-acid battery based on an electrolyte with soluble lead(II): V. Studies of the lead negative electrode

The structure of lead deposits (approximately 1 mm thick) formed in conditions likely to be met at the negative electrode during the charge/discharge cycling of a soluble lead-acid flow battery is examined. The quality of the lead deposit could be improved by appropriate additives and the preferred additive was shown to be the hexadecyltrimethylammonium cation, C₁₆H₃₃(CH₃)₃N⁺, at a concentration of 5 mM. In the presence of this additive, thick layers with acceptable uniformity could be formed over a range of current densities (20–80 mA cm⁻²) and solution compositions. While electrolyte compositions with lead(II) concentrations in the range 0.1–1.5 M and methanesulfonic acid concentrations in the range 0–2.4 M have been investigated, the best quality deposits are formed at lower concentrations of both species. Surprisingly, the acid concentration was more important than the lead(II) concentration; hence a possible initial electrolyte composition is 1.2 M Pb(II) + 5 mM C₁₆H₃₃(CH₃)₃N⁺ without added acid.     

Efficiency trends in electric machines and drives

Almost all electricity in the UK is generated by rotating electrical generators, and approximately half of it is used to drive electrical motors. This means that efficiency improvements to electrical machines can have a very large impact on energy consumption. The key challenges to increased efficiency in systems driven by electrical machines lie in three areas: to extend the application of variable-speed electric drives into new areas through reduction of power electronic and control costs; to integrate the drive and the driven load to maximise system efficiency; and to increase the efficiency of the electrical drive itself. In the short to medium term, efficiency gains within electrical machines will result from the development of new materials and construction techniques. Approximately a quarter of new electrical machines are driven by variable-speed drives. These are a less mature product than electrical machines and should see larger efficiency gains over the next 50 years. Advances will occur, with new types of power electronic devices that reduce switching and conduction loss. With variable-speed drives, there is complete freedom to vary the speed of the driven load. Replacing fixed-speed machines with variable-speed drives for a high proportion of industrial loads could mean a 15–30% energy saving. This could save the UK 15 billion kWh of electricity per year which, when combined with motor and drive efficiency gains, would amount to a total annual saving of 24 billion kWh.     

Self‐Compensation in Transparent Conducting F‐Doped SnO2

The factors limiting the conductivity of fluorine‐doped tin dioxide (FTO) produced via atmospheric pressure chemical vapor deposition are investigated. Modeling of the transport properties indicates that the measured Hall effect mobilities are far below the theoretical ionized impurity scattering limit. Significant compensation of donors by acceptors is present with a compensation ratio of 0.5, indicating that for every two donors there is approximately one acceptor. Hybrid density functional theory calculations of defect and impurity formation energies indicate the most probable acceptor‐type defects. The fluorine interstitial defect has the lowest formation energy in the degenerate regime of FTO. Fluorine interstitials act as singly charged acceptors at the high Fermi levels corresponding to degenerately n‐type films. X‐ray photoemission spectroscopy of the fluorine impurities is consistent with the presence of substitutional F_O donors and interstitial F_i in a roughly 2:1 ratio in agreement with the compensation ratio indicated by the transport modeling. Quantitative analysis through Hall effect, X‐ray photoemission spectroscopy, and calibrated secondary ion mass spectrometry further supports the presence of compensating fluorine‐related defects.     

The Human Centrifuge

Life on Earth has developed at unit gravity, 9.81 m/s², which was a major factor especially when vertebrates emerged from water onto land in the late Devonian, some 375 million years ago. But how would nature have evolved on a larger planet? We are able to address this question simply in experiments using centrifuges. Based on these studies we have gained valuable insights in the physiological process in plants and animals. They adapt to a new steady state suitable for the high-g environments applied. Information on mammalian adaptations to hyper-g is interesting or may be even vital for human space exploration programs. It has been shown in long duration animal hypergravity studies, ranging from snails, rats to primates, that various structures like muscles, bones, neuro-vestibular, or the cardio-vascular system are affected. However, humans have never been exposed to a hyper-g environment for long durations. Centrifuge studies involving humans are mostly in the order of hours. The current work on human centrifuges are all focused on short arm systems to apply short periods of artificial gravity in support of long duration space missions in ISS or to Mars. In this paper we will address the possible usefulness of a large human centrifuge on Earth. In such a centrifuge a group of humans can be exposed to hypergravity for, in principle, an unlimited period of time like living on a larger planet. The input from a survey under scientists working in the field of gravitational physiology, but also other disciplines, will be discussed.     

A repair-replace strategy based on usage rate for items sold with a two-dimensional warranty

When a repairable item fails under warranty, the manufacturer has the option of either repairing the failed item or replacing it with a new one. In this paper, a repair-replace strategy is discussed for the manufacturer of a product sold with a two-dimensional warranty. The strategy is based on a specified region of the warranty defined in terms of age and usage with the first failure in the region rectified by replacement and all other failures being minimally repaired. An accelerated failure time (AFT) model is used to allow for the effect of usage rate on item degradation.     

无变压器逆变器可降低复杂性并实现功率最大化

新一代无变压器技术降低了电力集成商（integrators）和公用电力事业机构的系统复杂性,针对两种最常见的大型光伏安装项目——大楼逆变器直接连接项目和用于并网发电输电的公用安装项目,该技术最大限度地提高了其电力传输能力。     

A multi-objective selection procedure of determining a Pareto set

Ranking and selection (R&S) procedures have been widely studied and applied in determining the required sample size (i.e., the number of replications or batches) for selecting the best system or a subset containing the best system from a set of k alternatives. Most of the studies in the R&S have focused on a single measure of system performance. In many practical situations, however, we need to select systems based on multiple criteria. A solution is called Pareto optimal if there exists no other solution which is better in all criteria. This paper discusses extending a R&S procedure to select a Pareto set containing non-dominated systems. Computational results show that the proposed procedures are effective in obtaining non-dominated systems.     

An Outer-Measure Approach for Resource-Bounded Measure

Lutz developed a general theory of resource-bounded measurability and measure on suitable complexity classes C⊆C (see Proceedings of the 13th IEEE Conference on Computational Complexity, pp. 236–248, 1998), where Cantor Space C is the class of all decision problems, and classes C include various exponential time and space complexity classes, the class of all decidable languages, and the Cantor space C itself. In this paper, a different general theory of resource-bounded measurability and measure on those complexity classes is developed. Our approach is parallel to the Carathéodory outer measure approach in classical Lebesgue measure theory. We shall show that many nice properties in the classical Lebesgue measure theory hold in the resource-bounded case also. The Carathéodory approach gives short and easy proofs of theorems in the resource-bounded case as well as in the classical case. The class of measurable sets in our paper is strictly larger than that of Lutz, and the two resource-bounded measures assign the same measure for a set if the set is measurable in the sense of Lutz.     

华阳全新X1平台9月登场释放数字核动力

继6月推出两款通用型数字屏产品后．3个月不到．国内知名汽车影音厂商——华阳又推出了X1全新数字平台．包括思域、凯美瑞、卡罗拉、本田CRV在内的数十歉专用机将陆续上市．速度之快让行业咂舌。作为国内领先的车载影音厂商．华阳推出的导航影音一体机一直漯受行业和消费者的推崇。此次推出的×1数字平台系列专用机同样是精品中的精品．势将引发车载影音市场新一轮热销风暴。