Effects of changes in strain path on the anisotropy of yield stresses of low-carbon steel and 70-30 brass sheets

Uniaxial tensile tests in various directions following uniaxial extension, equibiaxial stretching or plane strain rolling have been performed to study the effects of changes in strain path on the anisotropy of yield stresses of aluminium-killed low-carbon steel and 70-30 brass sheets. The anisotropy could be predicted from the specimen textures, if dislocation structure were equiaxed, as in the case of equibiaxial stretching. However, elongated dislocation cell structures, developed in the steel specimens prestrained in uniaxial tension or plane strain rolling, gave rise to the second-stage yield stresses higher than predicted from textures in the directions different from the maximum prestrain direction. Planar dislocation structures in the brass specimens prestrained in uniaxial tension or plane strain rolling gave the second-stage yield stresses lower than predicted from the textures in the directions different from the maximum prestrain direction. The phenomena are discussed based on textures and dislocation structures.     

大型离心复合球墨铸铁轧辊的生产

简述了我公司为舞阳铜厂试制４２００ｍｍ厚板轧机离心复合球墨铸铁轧辊的性能要求、内外层双重金属铸造工艺参数的选择及整个铸造生产工艺过程。     

High-transconductance n-type Si/SiGe modulation-doped field-effecttransistors

The authors report on the fabrication and the resultant device characteristics of the first 0.25-μm gate-length field-effect transistor based on n-type modulation-doped Si/SiGe. Prepared using ultrahigh vacuum/chemical vapor deposition (UHV/CVD), the mobility and electron sheet charge density in the strained Si channel are 1500 (9500) cm²/V-s and 2.5×10¹² (1.5×10¹² ) cm^-2 at 300 K (77 K). At 77 K, the devices have a current and transconductance of 325 mA/mm and 600 mS/mm, respectively. These values far exceed those found in Si MESFETs and are comparable to the best results achieved in GaAs/AlGaAs modulation-doped transistors     

Hg_（1－x）Cd_xTe的扫描光致发光研究

用傅里叶变换红外扫描光致发光方法研究了Ｈｇ１－ｘＣｄｘＴｅ体单晶样品，该方法可直接得到ＨｇＣｄＴｅ晶片组分的二维平面分布，并可得到辐射复合在复合机制中所占比重的平面分布，以及晶体中非平衡载流子寿命的分布     

ZrO_2与40Cr钢钎焊中的缓冲层

本试验研究了ＺｒＯ２与４０Ｃｒ钢在加入缓冲层前后的钎焊连接，结果表明：插入缓冲层Ｃｕ和Ｔｉ可以提高接头强度。对每一种缓冲层，存在一最佳厚度，对应的钎焊强度最大。此最佳厚度对Ｃｕ为０．４ｍｍ左右，对Ｔｉ为１ｍｍ左右。作者认为这是由缓冲层的力学性能和热膨胀系数对残余应力释放产生的两种相反影响而造成的。钎焊时，缓冲层Ｃｕ和Ｔｉ向钎料中均有程度不同的溶解，但不影响钎料对ＺｒＯ２的浸润和反应结合。ＺｒＯ２－４０Ｃｒ钢连接的所有接头均断在陶瓷的近缝区，其断裂方式有三种。     

Development of a physics analysis procedure for the prismatic very high temperature gas-cooled reactors

A new physics analysis procedure has been developed for a prismatic very high temperature gas-cooled reactor based on a conventional two-step procedure for the PWR physics analysis. The HELIOS and MASTER codes were employed to generate the coarse group cross sections through a transport lattice calculation, and to perform the 3-dimensional core physics analysis by a nodal diffusion calculation, respectively. Physics analysis of the prismatic VHTRs involves particular modeling issues such as a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment and state parameters. Double heterogeneity effect was considered by using a recently developed reactivity-equivalent physical transformation method. Neutron streaming effect was quantified through 3-dimensional Monte Carlo transport calculations by using the MCNP code. Strong core-reflector interaction could be handled by applying an equivalence theory to the generation of the reflector cross sections. The effects of a spectrum shift could be covered by optimizing the coarse energy group structure. A two-step analysis procedure was established for the prismatic VHTR physics analysis by combining all the methodologies described above. The applicability of our code system was tested against core benchmark problems. The results of these benchmark tests show that our code system is very accurate and practical for a prismatic VHTR physics analysis.     

SBLOCA long term cooling procedure for the integral type PWR

An advanced integral-type pressurized water reactor (IPWR) with a maximum thermal power of 65 MW has been developed at the Korea Atomic Energy Research Institute (KAERI). This 65 MW IPWR enhances the safety and reliability by adopting inherent safety design characteristics and an advanced passive design feature.     

To secure XML documents with the extension function of XSLT

XSLT is a very popular and flexible language for transforming XML documents which provides a powerful implementation of a tree‐oriented transformation language for transmuting instances of XML using a single vocabulary into a desired output. In this paper, we propose a processing model that enables the XSLT processor to encrypt and decrypt XML documents. The details of the implementation are presented. Our model supports a more general encryption scope than previous models. The implementation and experimental results demonstrate the practicality of the proposed model. Copyright © 2006 John Wiley & Sons, Ltd.     

Microring resonator channel dropping filters

Microring resonators side coupled to signal waveguides provide compact, narrow band, and large free spectral range optical channel dropping filters. Higher order filters with improved passband characteristics and larger out-of-band signal rejection are realized through the coupling of multiple rings. The analysis of these devices is approached by the novel method of coupling of modes in time. The response of filters comprised of an arbitrarily large dumber of resonators may be written down by inspection, as a continued fraction. This approach simplifies both the analysis and filter synthesis aspects of these devices     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.