Wireless Internet access for mobile subscribers based on theGPRS/UMTS network

With the advent of IP technologies and the tremendous growth in data traffic, the wireless industry is evolving its core networks toward IP technology. Enabling wireless Internet access is one of the upcoming challenges for mobile radio network operators. The General Packet Radio Service is the packet-switched extension of GSM and was developed to facilitate access to IP-based services better than existing circuit-switched services provided by GSM. We illustrate how a visited mobile subscriber on a GPRS/UMTS network can access his/her home network via the gateway GPRS support node (GGSN). We also propose some implementation ideas on wireless Internet access for a remote mobile subscriber based on a GPRS/UMTS network     

Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

An EM‐based adaptive multiple target tracking filter

Tracking targets of interest is one of the major research areas in radar surveillance systems. We formulate the problem as incomplete data estimation and apply EM to the MAP estimate. The resulting filter has a recursive structure analogous to the Kalman filter. The advantage is that the measurement‐update deals with multiple measurements in parallel and the parameter‐update estimates the system parameters on the fly. Experiments tracking separate targets in parallel show that tracking maintenance ratio of the proposed system is better than that of NNF and RMS position error is smaller than that of PDAF. Also, the system parameters are correctly obtained even from incorrect initial values. Copyright © 2001 John Wiley & Sons, Ltd.     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

Optimal tradeoffs for location-based routing in large-scale ad hoc networks

Existing location-based routing protocols are not versatile enough for a large-scale ad hoc environment to simultaneously meet all of the requirements of scalability, bandwidth efficiency, energy efficiency, and quality-of-service routing. To remedy this deficiency, we propose an optimal tradeoff approach that: 1) constructs a hybrid routing protocol by combining well-known location-update schemes (i.e., proactive location updates within nodes' local regions and a distributed location service), and 2) derives its optimal configuration, in terms of location-update thresholds (both distance and time-based), to minimize the overall routing overhead. We also build a route-discovery scheme based on an Internet-like architecture, i.e., first querying the location of a destination, then applying a series of local-region routing until finding a complete route by aggregating the thus-found partial routes. To find the optimal thresholds for the hybrid protocol, we derive the costs associated with both location updates and route discovery as a function of location-update thresholds, assuming a random mobility model and a general distribution for route request arrivals. The problem of minimizing the total cost is then cast into a distributed optimization problem. We first prove that the total cost is a convex function of the thresholds, and then derive the optimal thresholds. Finally, we show, via simulation, that our analysis results indeed capture the real behavior.     

A single-chip storage LSI for home networks

Network direct attached storage (NDAS) is a network storage architecture that allows direct attachment of existing ATA/ATAPI devices to Ethernet without a separate server. Unlike other architectures such as NAS, SAN, and USB mass storage, no server computer intervenes between the storage and the client hosts. We describe an NDAS disk controller (NDC) amenable to low-cost single-chip implementation that processes a simplified L3/L4 protocol and converts commands between ATA/ATAPI and Ethernet, while the remaining complex tasks are performed by remote hosts. Unlike NAS architectures that use TCP/IP, NDAS uses a TCP-like lean protocol that lends itself well to high-performance hardware realization. Thanks to the simple NDAS architecture and protocol, an NDC implemented on a single 4 mm /spl times/ 4 mm chip in 0.18 /spl mu/m CMOS technology achieves a maximum throughput of 55 Mbytes/s on gigabit Ethernet, which is comparable to that of a high-performance disk locally attached to a host computer.     

Effect of nisin on the storage of sous vide processed Korean seasoned beef

Seasoned beef called Jangzorim in Korea is produced by boiling in soy sauce, and is a popular food in Korea. The aim of this study is to evaluate the microbial safety and physical qualities of sous vide processed seasoned beef, and the effect of nisin during storage. Sous vide processed packages with or without nisin (100 IU or 500 IU) were stored at 4 °C or 25 °C for 60 days, and samples measured for quality at regular intervals throughout this storage period. In the case of 25 °C storage, the number of mesophilic microorganisms in seasoned beef packages without nisin increased markedly, but with nisin there was no observed increase. Psychrotrophic microorganisms, anaerobic microorganisms, and B. cereus cells showed similar trends, although C. perfringens was not detected in all samples. At 25 °C storage, changes in the cutting force of packages containing nisin showed no significant change, packages without nisin decreased markedly. The colour of packages without nisin showed a drastic decrease in lightness (‘L’) while no changes were observed in packages with nisin.