Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Experimental and theoretical study on H2/CO2 separation by a five-step one-column psa process

An experimental and theoretical study is performed for bulk separation of H₂/CO₂ mixture (70/30 volume %) by PSA process with zeolite 5A, a process widely used commercially in conjunction with the catalytic steam reforming of natural gas or naphtha. For the optimized adsorption conditions of PSA, the characteristics of adsorption/desorption characteristics have been studied through breakthrough and desorption experiments under various conditions. The purge-to-feed ratio is important to the H₂ product purity only at a long adsorption step time. H₂ could be concentrated from 70% in the feed to 99.99% at H₂ recovery of 67.5%. The results of all five steps in PSA are successfully predicted by the LDF model considering an energy balance and nonlinear isotherm. For the model, the effective diffusivities (D,) are obtained separately from the uptake curves of H₂ and CO₂. The Langmuir-Freundlich isotherm is used to correlate the experimental equilibrium data and is very well fitted to the results.     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

钒在陶瓷工业中的应用

本文通过钒的应用，阐述了金光釉和凹釉的形成机理。并说明了其在陶瓷釉料生产中所扮演的重要角色。     

Effect of hydrophobic hexafluoroisopropylidene group on the water sorption behaviors of rigid poly(p‐phenylene pyromellitimide) polyimide thin films

We prepared poly(p‐phenylene pyromellitimide) (PMDA–PDA), poly(p‐phenylene 4,4′‐hexafluoroisopropylidene diphthalimide), and their copolyimides with various compositions to explore the relationship between the water sorption and structure. The water sorption behaviors were gravimetrically investigated as a function of composition and temperature and interpreted with a Fickian diffusion model in films. Overall, the water sorption behaviors were strongly dependent on the changes in morphological structure, which originated from the variations in composition. When the content of the bulky hexafluoroisopropylidene group (6FDA) was increased, the water uptake decreased from 5.80 to 3.18 wt %, whereas the diffusion coefficient increased from 3.6 × 10^?10 to 11.3 × 10^?10 cm²/s. The relatively high water uptake in the PMDA–PDA polyimide film was successfully healed by the incorporation of 6FDA, which may have resulted from the increases in the intermolecular packing order and hydrophobicity. The degree of orientation and crystallinity, which are in‐plane characteristics, were directly correlated to the diffusion coefficient and activation energy in the polyimide film. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3442–3446, 2003     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

Preparation and properties of polyimide/silica hybrid composites based on polymer‐modified colloidal silica

A new type of polyimide/silica (PI/SiO₂) hybrid composite films was prepared by blending polymer‐modified colloidal silica with the semiflexible polyimide. Polyimide was solution‐imidized at higher temperature than the glass transition temperature (T_g) using 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐diaminodiphenyl ether (ODA). The morphological observation on the prepared hybrid films by scanning electron microscopy (SEM) pointed to the existence of miscible organic–inorganic phase, which resulted in improved mechanical properties compared with pure PI. The incorporation of the silica structures in the PI matrix also increased both T_g and thermal stability of the resulting films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2053–2061, 2006     

Phase Behavior and Mechanical Properties of Siloxane-Urethane Copolymer

Two series of siloxane-urethane copolymers were prepared from polydimethylsiloxane (PDMS) with a molecular weight of 1000 or 1800 which was used as a soft segment, 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (1,4-BD). Differential scanning calorimetry (DSC) demonstrated that the position (T_gs) and breadth (ΔB) of soft-segment glass transition of copolymers remained constant as the hard-segment content increased. Heat capacities at soft-segment glass transition of the copolymer (ΔCp) were 0.195∼0.411 J/g^○C and heat capacities of pure PDMS (ΔCp₀) were 0.571∼0.647 J/g^○C, leading to the various ΔCp/ΔCp₀ ratios. The ΔCp/ΔCp₀ ratios decreased as the increasing of hard-segment content, showing poor phase separation. The FTIR spectrum confirmed the occurrence of hydrogen bonding in ether end-group of pure PDMS. The ether group of the soft segment led to interfacial mixing between soft and hard segments. The tan δ of the soft segment determined by dynamic mechanical testing (DMA) also identified the mixing of soft and hard segments. The mechanical properties of the copolymer were directly related to either the soft and hard segment contents or the chain lengths of soft and hard segments. The hard segment that reinforced the soft segment and interfacial thickness between soft and hard segment dominated the mechanical properties.     

SORPTION EQUILIBRIUM OF COPPER BY PARTIALLY-COAGULATED CALCIUM ALGINATE GEL

The sorption equilibrium of dissolved copper by spherical partially-coagulated gels of calcium alginate was investigated in this work. The gels were formed by dispensing a viscous algin (food grade sodium alginate from kelp) solution with a multi-tip dispenser into 0.05 M CaCl₂ solution in a loop fluidized bed reactor. The resultant semi-rigid spherical gels were then transferred to another reactor operated batch wise to absorb dissolved copper at low concentrations (10-40 ppm). When the concentration of the inert neutral salt NaNO₃, added to the reactor fluid was 0.01 M, the amount of copper absorbed was found to be substantially higher than that at 0.1 MNaN0₃. The conventional Langmuir's model based on the concentration of copper in solution yielded different values of conditional stability constant at different ionic strengths in the reactor fluid. However, by defining the copper-binding stability constant on the basis of copper activity in the gel phase with the competition from calcium for metal binding sites taken into account, a unique copper-binding stability constant and a unique calcium-binding stability constant were obtained. The numerical procedure for estimating the activity of copper in the gel fluid was modified from Jang et al. Water Research, 1990, in press).     

Anisotropically ordered liquid crystalline epoxy network on carbon fiber surface

Summary Anisotropic orientation of liquid crystalline epoxy(LCE) resin on carbon fiber(CF) surface was investigated and it was correlated with curing behavior and thermomechanical properties of LCE. Anisotropic orientation of a LCE resin was spontaneously induced on CF surface along a long molecular axis of CF during curing and the anisotropic orientation was maintained after curing. Curing of LCE was accelerated by alignment of LCE on CF and anisotropic orientation of LCE enhanced dynamic modulus of CF reinforced LCE composites.