Physics principles to achieve comparable fission power from fertile and fissile rods of the conceptual ATBR/FTBR reactors

Loading of seedless fertile rods has been used as the central principle to maximize fertile to fissile conversion in the two thorium breeder reactor concepts, viz. ATBR and FTBR [Jagannathan, V., Pal, Usha, Karthikeyan, R., Ganesan, S., Jain, R.P., Kamat, S.U., 2001. ATBR – a thorium breeder reactor concept for an early induction of thorium in an enriched uranium reactor. Nuclear Technology 133, 1–32; Jagannathan, V., Pal, Usha, Karthikeyan, R., Raj Devesh, Srivastava, Argala, Ahmad Khan, Suhail, 2007. Reactor physics ideas to design novel reactors with faster fissile growth. In: Paper accepted for oral presentation in ‘ICENES 2007 – 13th International Conference on Emerging Nuclear Energy Systems, 3--8 June 2007, Istanbul, Turkey]. At fresh state the seedless thoria rods will produce practically no fission power, or nearly thousand times less fission rate compared to the seed fuel rods. Hence it is conceived that the fuel assembly would be constituted by assembling the fresh seed rods with one fuel cycle irradiated fertile thoria rods. Even in this state there is a wide disparity between the fissile content of these rods. By judicious choice of the rod dimensions and their relative locations, a degree of balance in the fission rate is achieved in the fresh state of seeded rods. Remarkably as the burnup proceeds the initially seedless fertile rods have a continuous growth of fissile content up to an asymptotic value for a given spectrum and the fissile content in seeded rods monotonically decreases. If the discharge burnup is sufficiently large by design, it is seen that the power share of the initially seedless fertile rods can even exceed that of the seed fuel rods. The physics principles of achieving this characteristic are presented in this paper.     

A 210-GHz fT SiGe HBT with a non-self-aligned structure

A record 210-GHz f_T SiGe heterojunction bipolar transistor at a collector current density of 6-9 mA/μm² is fabricated with a new nonself-aligned (NSA) structure based on 0.18 μm technology. This NSA structure has a low-complexity emitter and extrinsic base process which reduces overall thermal cycle and minimizes transient enhanced diffusion. A low-power performance has been achieved which requires only 1 mA collector current to reach 200-GHz f_T. The performance is a result of narrow base width and reduced parasitics in the device. Detailed comparison is made to a 120-GHz self-aligned production device     

The multi-hop multi-rate wavelength division multiplexing ring

Transparency of the optical layer offers the possibility to design a network that operates at varying transmission bit rates. While variable bit rate interfaces are being tested and will soon provide the possibility to optimally select the transmission rate for each optical channel, the potential advantages of relying upon multiple transmission rates in the optical network have yet to be fully explored. In this paper, we define the concept of multi-hop and multi-rate (M&M for short) network in which the tributary signal is transmitted over a concatenation of optical channels, with each optical channel operating at its own transmission rate. The optimal rate of each optical channel is determined by a number of factors including the end node's interface, amount of multiplexed traffic and cost of the network components. The potential advantages provided by the M&M network when compared to first generation optical networks (i.e., SONET/SDH), to single- and multi-hop (constant bit rate) optical networks, are discussed in general and demonstrated numerically in a WDM ring. Presented results show that the network cost reduction achieved by the M&M design is a function of the cost ratio between the optical bandwidth (wavelengths) and the optical terminals     

On plastic strain recovery in freestanding nanocrystalline metal thin films

In a recent article [J. Rajagopalan, J.H. Han, M.T.A. Saif, Science 315 (2007) 1831–1834], we have reported substantial (50–100%) plastic strain recovery in freestanding nanocrystalline metal films (grain size 50–65 nm) after unloading. The strain recovery was time dependent and thermally activated. Here we model the time evolution of this strain recovery in terms of a thermally activated dislocation propagation mechanism. The model predicts an activation volume of ≈42b³ for the strain recovery process in aluminum.     

Corrosion studies of modified organosilane coated magnesium–yttrium alloy in different environments

Magnesium (Mg) and its alloys have numerous potential applications as biodegradable implants, but the fast degradation rate of Mg alloys at the initial implanted stage could be a problem. This paper describes the modification of the water-based bis-[triethoxysilyl] ethane (BTSE) silane applied to the surface of magnesium–yttrium (Mg–4Y) to increase its corrosion resistance. Surface characterization by SEM, FTIR, and EDX showed that the hydrolysis and condensation of the silane resulted in a covalent bonding to the Mg–4Y surface. Corrosion behavior of the uncoated and coated Mg–4Y alloy was evaluated in different environments by using a novel self-developed corrosion probe. Based on the electrochemical results of DC polarization and electrochemical impedance spectroscopy (EIS), we conclude that the epoxy-modified BTSE silane coating successfully increases the corrosion resistance at the initial stage of implantation. The corrosion rates in the flesh of dead mice environments such as body cavity and subcutaneous tissue of the mice were lower than the corrosion rates in in vitro environments.     

Distributed power control for cellular networks in the presence of channel uncertainties

In this paper, a novel distributed power control (DPC) scheme for cellular network in the presence of radio channel uncertainties such as path loss, shadowing, and Rayleigh fading is presented. Since these uncertainties can attenuate the received signal strength and can cause variations in the received signal-to-interference ratio (SIR), a new DPC scheme, which can estimate the slowly varying channel uncertainty, is proposed so that a target SIR at the receiver can be maintained. Further, the standard assumption of a constant interference during a link's power update used in other works in the literature is relaxed. A CDMA-based cellular network environment has been developed to compare the proposed scheme with earlier approaches. The results show that our DPC scheme can converge faster than others by adapting to the channel variations. In the presence of channel uncertainties, our DPC scheme renders lower outage probability while consuming significantly low power per active mobile user compared with other schemes that are available in the literature.     

Chromium hexacyanoferrate as a cathode material in microbial fuel cells

In this work, it has been demonstrated that the disadvantages associated with the use of the potassium ferricyanide solution as the catholyte in a microbial fuel cell (MFC) were overcome by using a graphite cathode electrochemically modified with chromium hexacyanoferrate (CrHCF) film. The existing use of potassium ferricyanide solution as the catholyte is limited by the need to replace the catholyte every week and it cannot be used in a sustained manner. The present work evaluates the suitability of the CrHCF modified film as a suitable cathode material in a prototype of a MFC wherein Hansenula anomala is used as the biocatalyst in the anode compartment. The CrHCF film was prepared in the presence of the dopant camphor sulphonic acid to improve the reversibility of the film in phosphate buffer.     

Decolourization of reactive dyes by thin film immobilized surface photoreactor using solar irradiation

The photocatalytic degradation of four reactive dyes using TiO₂ was investigated in suspended and immobilized systems under solar irradiation. Batch degradation experiments were carried out at initial concentrations ranging from 25 to 100 mg l⁻¹ and at a catalyst loading of 0.5–1 g l⁻¹. The studies on batch photocatalytic degradation of four dyes, showed about 30–70% colour removal depending on the initial dye concentration, dye structure (functional group and reactivity of dyes) and the amount of catalyst. The thin film immobilized surface photoreactor was able to give nearly 90–98% colour removal depending on the initial concentration and exposure time. Flow rate has noticeable effect on colour removal particularly at higher concentration (100 mg l⁻¹). High colour removals obtained with solar radiation indicated effectiveness of this process and its potential for practical application.