How necessary is a fast testkit for mitigation of pandemic flu?

It is widely feared that a novel, highly pathogenic, human transmissible influenza virus may evolve that could cause the next global pandemic. Mitigating the spread of such an influenza pandemic would require not only the timely administration of antiviral drugs to those infected, but also the implementation of suitable intervention policies for stunting the spread of the virus. Towards this end, mathematical modelling and simulation studies are crucial as they allow us to evaluate the predicted effectiveness of the various intervention policies before enforcing them. Diagnosis plays a vital role in the overall pandemic management framework by detecting and distinguishing the pathogenic strain from the less threatening seasonal strains and other influenza-like illnesses. This allows treatment and intervention to be deployed effectively, given limited antiviral supplies and other resources. However, the time required to design a fast and accurate testkit for novel strains may limit the role of diagnosis. Herein, we aim to investigate the cost and effectiveness of different diagnostic methods using a stochastic agent-based city-scale model, and then address the issue of whether conventional testing approaches, when used with appropriate intervention policies, can be as effective as fast testkits in containing a pandemic outbreak. We found that for mitigation purposes, fast and accurate testkits are not necessary as long as sufficient medication is given, and are generally recommended only when used with extensive contact tracing and prophylaxis. Additionally, in the event of insufficient medication and fast testkits, the use of slower, conventional testkits together with proper isolation policies while waiting for the diagnostic results can be an equally effective substitute.     

Low distortion speech enhancement

An innovative approach to speech enhancement is illustrated which minimises distortion to the underlying speech during the noise-reduction process. The key to this approach lies in the identification of whether the additive noise for a particular frequency component is constructive or destructive. Once this can be identified both multiplicative and subtractive filters can be derived using the minimum mean-square error criterion. The optimal combination of the proposed multiplicative and subtractive filter is also shown     

Iterative joint source-channel decoding with combined a priori information of source and channel

A joint source-channel decoding (JSCD) scheme which exploits the combined a priori information of source and channel in an iterative manner is proposed. A sequence minimum mean-square error (SMMSE) estimator based on bit or symbol error transition probability of the channel with memory is proposed and used in the iterative decoding process. Simulation results show that our proposed scheme leads to significant improvement over the scheme without using the a priori information of the source or channel.     

Effects of trypsin‐hydrolyzed wheat gluten peptide on wheat flour dough

BACKGROUND: Gluten peptide was prepared by trypsin hydrolysis and characterized by high‐performance liquid chromatographic analysis. The effects on non‐frozen and frozen doughs of trypsin‐hydrolyzed gluten peptide (THGP) and its combination with ascorbic acid or KBrO₃ were investigated. RESULTS: Molecular analysis of THGP showed a decrease in the high‐molecular‐weight and an increase in the low‐molecular‐weight sodium dodecyl sulfate‐soluble fractions, compared with those of control wheat gluten. The addition of 8% THGP decreased the mixing time and tolerance of the dough, both with and without ascorbic acid or KBrO₃. However, the maximum resistance and extensibility of the rested dough containing 8% THGP, with and without ascorbic acid or KBrO₃, were not significantly different from those of the control dough. The addition of 8% THGP significantly increased the loaf volume of bread baked from non‐frozen dough when combined with 60 ppm ascorbic acid or 30 ppm KBrO₃, but it had a significant effect both with and without ascorbic acid or KBrO₃ on frozen‐dough bread. A large difference in volume was observed between breads made with and without THGP at the oven‐spring, rather than at proofing. CONCLUSION: The addition of 8% THGP increased the loaf volume of bread made from freeze‐damaged dough and this effect increased when THGP was combined with 60 ppm ascorbic acid. Copyright © 2008 Society of Chemical Industry     

Vasoactive intestinal peptide stimulation of human trabecular meshwork cell growth

PURPOSE: To demonstrate that vasoactive intestinal peptide (VIP), a 28-amino acid neuropeptide, is a growth factor of human trabecular meshwork (TM) cells in culture and in a corneoscleral explant organ culture treated with laser trabeculoplasty (LTP). METHODS: Proliferating human TM cells in cell cultures were incubated with VIP for 20 hours, followed by total cell number determination, using a Coulter counter. The percentage of proliferating TM cells was assessed, using an antibody against the proliferating cell nuclear antigen (PCNA). To test the growth effect of VIP on TM cells in situ, corneoscleral explants in organ cultures were first treated with argon LTP to initiate TM-cell proliferation and then were exposed to VIP for 48 hours. The mitotic TM cells were demonstrated immunocytochemically, using anti-PCNA in paraffin sections of the explants; and the total number of TM cells was determined after paraffin sections were counterstained by hematoxylin. RESULTS: Vasoactive intestinal peptide dose-dependently stimulated the proliferation of TM cells in cell culture. Treatment with 5 x 10(-10) M VIP resulted in a maximal increase of 40% in cell number. The effect of VIP was blocked by a VIP antagonist. The number of PCNA-stained TM cells and the total cell number in the TM in LTP-treated corneoscleral explants were increased by VIP. CONCLUSIONS: Exogenously applied VIP stimulated the proliferation of human TM cells in subconfluent cultures and in LTP-treated corneoscleral explants. In that LTP has been shown to increase the number of TM cells in situ, the growth stimulatory effect of VIP may help enhance this therapy.     

Reliability analysis and comparison of several structures

In this study, we consider the redundant structure with the function of swithover processing which is assumed to cause the increase of the failure rate of the system. A single component system and a simple redundant system are compared in terms of the four reliability measures such as the reliability function, the MTBF, the failure rate and the mean residual life (MRL). We find the relations of the MTBF, the failure rate, and the MRL between two systems. We also consider a quad configuration system and a parallel string configuration system and evaluate the four reliability measures for two systems. As a numerical example, the total system down of an ATM switching system is considered.     

Response of a high-strength flexible laminate to dynamic tension

The dynamic stress–strain behaviour of the Spectra Shield^® LCR (laminated composite roll) is determined from tests using a tensile split Hopkinson bar, and the experimental results indicate that it is highly strain rate sensitive. The failure strain decreases initially with strain rate up to a critical value, and rises thereafter, while the failure stress increases with strain rate to a similar value of strain rate, after which it decreases. The nature of failure of filaments is observed to change with strain rate, first becoming increasingly brittle and then returning to more ductile modes once the critical strain rate is exceeded. The increase in failure strain and stress are accounted for in terms of strain rate hardening. An explanation of the reduction in failure stress beyond the critical strain rate is proposed with respect to increasing viscoelastic hysteresis and reduction in the time available for filament alignment.     

Measuring the particle size of a known distribution using the focused beam reflectance measurement technique

The accuracy of the focused beam reflectance measurement (FBRM) probe, which measures a chord length distribution, from Mettler-Toledo Lasentec^® has been explored. A particle video microscope (PVM) probe, which provides in situ digital images, was used as a direct visual method to test the reliability of the FBRM results. These probes can provide in situ particle characterization at high pressures. The FBRM has been used to study emulsions and ice and clathrate hydrate formation. The ability of the FBRM to accurately characterize unimodal and bimodal distributions of particles and droplets and to measure agglomeration events was investigated. It was found that while the FBRM can successfully identify system changes, certain inaccuracies exist in the chord length distributions. Particularly, the FBRM was found to oversize unimodal distributions of glass beads, but undersize droplets in an emulsion and was unable to measure full agglomerate sizes. The onset of ice and hydrate nucleation and growth were successfully detected by the FBRM, but quantitative analysis of the particle and agglomerate sizes required simultaneous PVM measurements to be performed.     

Enhancing adhesion by ion beam-induced atomic mixing at the interface between copper film and polyimide substrate

Ion beam mixing was used to improve the adhesion between deposited Cu film (400 Å) and polyimide (PI) substrate. Ar⁺ ion with the energy levels between 180 and 200 keV, and the dose between 10¹⁴ to 4 × 10¹⁶ ions/cm² were used. The surface analyses were carried out by Rutherford Backscattering Spectroscopy (SEM). RBS analysis, using 2 MeV He⁺ ions, showed mixing of Cu and FI and the mixing depended on the Ar⁺ energy and dose. The X-ray study showed a very broad halo for deposited Cu film but the (111) peak appeared after the Ar⁺ implantation and the peak increased with Ar⁺ ion dose. Optical micrographs showed that Cu film formed circular bubbles after many thermal cycles when adhesion was poor and fracture cracks when adhesion was good.