Hydrogen storage properties of Mg2Ni affected by Cr catalyst

The effect of Cr as a catalyst in different proportions was investigated to monitor the hydrogen storage properties of Mg₂Ni including their thermodynamic aspects. The P–C–T isotherms for absorption/desorption were measured at 225 °C, 250 °C, 275 °C and 300 °C temperatures. A significant increment in the plateau pressures at different temperature was observed, which shows the positive impact of Cr content in the formation of less stable hydrides. The active sites produced by the ball milling may be the reason for the formation of less stable hydrides. Decrements in the storage capacity with the Cr content were attributed to the formation of MgNi₂ phase which does not absorb hydrogen at the employed temperature-pressure conditions. XRD and SEM technique were used to identify the structural and morphological changes induced by the hydrogenation cycles.     

Aesthetical design of a car profile: a Kano model-based hybrid approach

An amicable aesthetical design of a product is prudent for its wide acceptability and viability. Selection of shape parameters with customer satisfaction is critical in aesthetical design and a challenging task for designers. In the present work, the authors proposed a sequential approach to design a car profile with aesthetical aspects. The methodology is based on Kano model that provides a framework for incorporation of customer satisfaction with the design requirements. Further, Taguchi's robust design approach has been used to find the optimum level of the parameter to achieve initial design estimates and thereafter, response surface method (RSM) is applied to refine the optimum values, precisely. The methodology has been illustrated with a case study.     

Voltage-Dependent Charge Storage in Cladded Zn0.56Cd0.44Se Quantum Dot MOS Capacitors for Multibit Memory Applications

As conventional memories approach scaling limitations, new storage methods must be utilized to increase Si yield and produce higher on-chip memory density. Use of II–VI Zn_0.56Cd_0.44Se quantum dots (QDs) is compatible with epitaxial gate insulators such as ZnS-ZnMgS. Voltage-dependent charging effects in cladded Zn_0.56Cd_0.44Se QDs are presented in a conventional metal–oxide–semiconductor capacitor structure. Charge storage capabilities in Si and ZnMgS QDs have been reported by various researchers; this work is focused on II–VI material Zn_0.56Cd_0.44Se QDs nucleated using photoassisted microwave plasma metalorganic chemical vapor deposition. Using capacitance–voltage hysteresis characterization, the multistep charging and discharging capabilities of the QDs at room temperature are presented. Three charging states are presented within a 10 V charging voltage range. These characteristics exemplify discrete charge states in the QD layer, perfect for multibit, QD-functionalized high-density memory applications. Multiple charge states with low operating voltage provide device characteristics that can be used for multibit storage by allowing varying charges to be stored in a QD layer based on the applied “write” voltage.     

Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing

Commercial dual-phase (DP) steel in sheet form and comprised of ferrite, martensite, and bainite was subjected to uniaxial tension up to fracture. The damage characteristics were studied through extensive quantitative metallography and scanning electron microscope (SEM) observations of polished sections and fracture surfaces of failed specimens. The observed void nucleation mechanisms include nucleation at the martensite/ferrite interface or triple junction (most predominant), nucleation due to the cracking of martensite particles, and nucleation at the inclusions. The void characteristics in terms of area fraction, void density, void size ranges, and void orientations were analyzed as a function of thickness strain from various regions of the different uniaxial tensile test specimens taken to fracture. The damage analysis suggests that the void nucleation occurs during the entire deformation process with an almost constant rate and this rate reduces before fracture. A nucleation strain of 0.15 has been estimated for this material.     

Movable roof insulation in hot climates

This paper presents the results of experiments on the effect of a system of movable insulation – with and without a roof pond – on temperature and heat flow at the ceiling surfaces of air conditioned and unconditioned rooms in buildings roofed with thick reinforced concrete which are exposed to extremes of hot and cold weather. Results indicate that there is considerable merit in adopting such a system, particularly in hot, dry conditions, in addition to the limited benefits of harnessing solar energy in winter conditions.

The experiments were carried out at the Central Building Research Institute, Roorkee, UP, India. Mr Rao is at present working as an associate professor in the Department of Building Science, Faculty of Architecture, University of Singapore.     

Batch and continuous studies on treatment of pulp mill wastewater by Aeromonas formicans

Batch and continuous studies have been conducted on the treatment of black liquor from a kraft pulp and paper mill by a bacterial strain, Aeromonas formicans. The results of batch studies revealed that the strain was able to remove 71% and 78% of COD and lignin respectively, while the colour removal efficiency was around 86% in 10 days of retention time. The analysis of lignin degradation products by gas chromatography after 20 days of incubation revealed the formation of some phenolic acids, which were responsible for the decrease in pH during batch studies. The removal efficiencies of COD, colour and lignin obtained in continuous reactor studies were 73, 88 and 77% respectively for an 8 day detention period and these efficiencies were almost the same as obtained in batch studies. © 2001 Society of Chemical Industry     

Green biomass active electronic diode

For the first time, a biomass electronic junction functioning as a conventional electronic diode inside green leaves of Vinka-rosa and Plumeria rubra mass structure has been experimentally predicted and studied. The experimental diode demonstrated appropriate conventional electronic diode characteristics. The predicted diode junctions were operated for forward and reverse dc voltage biases in the range of ±1 to 10 and 1 to 30?V respectively. The studies revealed a strong functional dependence on the water content of the green leaf. These studies are sequential to the very recently reported research work of Kosta et al. on bioelectronics and soilelectronics. The study speculatively forecasts the beginning of a new revolutionary era of green biomass electronic circuitry.     

Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography

The present study focus on abrasive flow finishing (AFF), a process that finishes complex internal and external geometries with the help of viscoelastic abrasive medium, while keeping in mind its low finish and material removal rates (MRR). Researchers have often strived to improve finishing rate and MRR. As an attempt to overcome the said limitations, this paper discusses rotational abrasive flow finishing (R-AFF) process wherein complete tooling is externally rotated and the medium reciprocates with the help of hydraulic actuators. In this study, preliminary experiments are conducted on Al alloy and Al alloy/SiC metal matrix composites (MMCs) at different extrusion pressures, and medium compositions are employed for finding optimum conditions of the same for higher change in roughness (ΔR_a). The same optimum conditions are used to study the effect of workpiece rotational speed on (ΔR_a), material removal (MR), change in workpiece hardness and surface topology. It is noted that as the workpiece rotational speed increases from 2 to 10 RPM, the experimental helix angle decreases from 22° to 9° and the helical path length increases from 67 to 160 mm. Based on these findings the mechanism of material removal of matrix and reinforcement in MMC using R-AFF have been proposed. Here the matrix material is removed by micro-cutting and three methods of material removal mechanisms for reinforcement are also explained. The scientific logic behind finishing mechanism of matrix and reinforcement, cross hatch patterns, helical path directions, micro-scratch (μ-scratch) width and depth variation with size, orientation and support that active abrasive grain obtains from neighboring abrasives is derived from scanning electron microscopy micrographs. Finally this study establishes that R-AFF can produce 44% better ΔR_a and 81.8% more MR compared to the AFF process. Accordingly, R-AFF generates micro cross hatch pattern on the finished surface that can improve lubricant holding capabilities.     

Stability of biodiesel and its blends: A review

Biodiesel consists of long chain fatty acid esters derived from feed stocks such as vegetable oils, animal fats and used frying oil, etc. which may contain more or less unsaturated fatty acids which are prone to oxidation accelerated by exposure to air during storage and at high temperature may yield polymerized compounds. Auto oxidation of biodiesel can cause degradation of fuel quality by affecting the stability parameters. Biodiesel stability includes oxidation, storage and thermal stability. Oxidation instability can led to the formation of oxidation products like aldehydes, alcohols, shorter chain carboxylic acids, insolubles, gum and sediment in the biodiesel. Thermal instability is concerned with the increased rate of oxidation at higher temperature which in turn, increases the weight of oil and fat due to the formation of insolubles. Storage stability is the ability of liquid fuel to resist change in its physical and chemical characteristics brought about by its interaction with its environment and may be affected by interaction with contaminants, light, factors causing sediment formation, changes in color and other changes that reduce the clarity of the fuel. These fuel instabilities give rise to formation of undesirable substances in biodiesel and its blends beyond acceptable quantities as per specifications and when such fuel is used in engine, it impairs the engine performance due to fuel filter plugging, injector fouling, deposit formation in engine combustion chamber and various components of the fuel system.The present review attempts to cover the different types of fuel stabilities, mechanism of occurrence and correlations/equations developed to investigate the impact of various stability parameters on the stability of the fuel. A review of the use of different types of natural and synthetic antioxidants has also been presented which indicates that natural antioxidants, being very sensitive to biodiesel production techniques and the distillation processes have varying impacts on fuel stability and available literature is very much scarce. The work on the use of synthetic antioxidants on the stability of biodiesel (both distilled and undistilled) from various resources has indicated that out of various 8 synthetic antioxidants studied so far only 3 antioxidants have been found to increase the fuel stability significantly. However, effectiveness of these antioxidants is in the order of TBHQ > PY > PG.     

Biodiesel production from Jatropha curcas oil

In view of the fast depletion of fossil fuel, the search for alternative fuels has become inevitable, looking at huge demand of diesel for transportation sector, captive power generation and agricultural sector, the biodiesel is being viewed a substitute of diesel. The vegetable oils, fats, grease are the source of feedstocks for the production of biodiesel. Significant work has been reported on the kinetics of transesterification of edible vegetable oils but little work is reported on non-edible oils. Out of various non-edible oil resources, Jatropha curcas oil (JCO) is considered as future feedstocks for biodiesel production in India and limited work is reported on the kinetics of transesterification of high FFA containing oil. The present study reports a review of kinetics of biodiesel production. The paper also reveals the results of kinetics study of two-step acid–base catalyzed transesterification process carried out at pre-determined optimum temperature of 65 and 50 °C for esterification and transesterification process, respectively, under the optimum condition of methanol to oil ratio of 3:7 (v/v), catalyst concentration 1% (w/w) for H₂SO₄ and NaOH and 400 rpm of stirring. The yield of methyl ester (ME) has been used to study the effect of different parameters. The maximum yield of 21.2% of ME during esterification and 90.1% from transesterification of pretreated JCO has been obtained. This is the first study of its kind dealing with simplified kinetics of two-step acid–base catalyzed transesterification process carried at optimum temperature of both the steps which took about 6 h for complete conversion of TG to ME.