Characterization and tribological behavior of cast In-Situ Al (Mg,Mo)-Al2O3 (MoO3) composite

Aluminum alloy—based cast in-situ composite has been synthesized by dispersion of externally added molybdenum trioxide particles (MoO₃) in molten aluminum at the processing temperature of 850 °C. During processing, the displacement reaction between molten aluminum and MoO₃ particles results in formation of alumina particles in situ and also releases molybdenum into molten aluminum. A part of this molybdenum forms solid solution with aluminum and the remaining part reacts with aluminum to form intermetallic phase Mo(Al_1−x Fe _x )₁₂ of different morphologies. Magnesium (Mg) is added to the melt in order to help wetting of alumina particles generated in situ, by oxidation of molten aluminum by molybdenum trioxide, and helps to retain these particles inside the melt. The mechanical properties of the cast in-situ composite, as indicated by ultimate tensile stress, yield stress, percentage elongation, and hardness, are relatively higher than those observed either in cast commercial aluminum or in cast Al-Mo alloy. The wear and friction of the resulting cast in-situ Al(Mg,Mo)-Al₂O₃(MoO₃) composites have been investigated using a pin-on-disc wear testing machine under dry sliding conditions at different normal loads of 9.8N, 14.7N, 19.6N, 24.5N, 29.4N, 34.3N, and 39.2 N and a constant sliding speed of 1.05 m/s. The results of the current investigation indicate that the cumulative volume loss and wear rate of cast in-situ composites are significantly lower than those observed either in cast commercial aluminum or in cast Al-Mo alloy, under similar load and sliding conditions. Beyond about 30 to 35 N loads, there appears to be a higher rate of increase in the wear rate in the cast in-situ composite as well as in cast commercial aluminum and cast Al-Mo alloy. For a given normal load, the coefficient of friction of cast in-situ composite is significantly lower than those observed either in cast commercial aluminum or in cast Al-Mo alloy. The coefficient of friction of cast in-situ composite increases gradually with increasing normal load while those observed in cast commercial aluminum or in cast Al-Mo alloy remain more or less the same. Beyond a critical normal load of about 30 to 35 N, the coefficient of friction decreases with increasing normal load in all the three materials.     

Open-Source Model Checking

We present GMC², a software model checker for GCC, the open-source compiler from the Free Software Foundation (FSF). GMC², which is part of the GMC static-analysis and model-checking tool suite for GCC under development at SUNY Stony Brook, can be seen as an extension of Monte Carlo model checking to the setting of concurrent, procedural programming languages. Monte Carlo model checking is a newly developed technique that utilizes the theory of geometric random variables, statistical hypothesis testing, and random sampling of lassos in Büchi automata to realize a one- sided error, randomized algorithm for LTL model checking. To handle the function call/return mechanisms inherent in procedural languages such as C/C++, the version of Monte Carlo model checking implemented in GMC² is optimized for pushdown-automaton models. Our experimental results demonstrate that this approach yields an efficient and scalable software model checker for GCC.     

Effects of diet on rumen proliferation and fecal shedding of Escherichia coil O157:H7 in calves

Calves inoculated with Escherichia coli O157:H7 and fed either a high-roughage or high-concentrate diet were evaluated for rumen proliferation and fecal shedding of E. coli O157:H7. Calves fed the high-roughage diet had lower mean rumen volatile fatty acid concentrations and higher rumen pH values than did calves fed the high-concentrate diet. Despite these differences in rumen conditions, the calves fed the high-roughage diet did not have greater rumen populations of E. coli O157: H7 and did not exhibit increased or longer fecal shedding compared with the calves fed the high-concentrate diet. Two calves shedding the highest mean concentrations of E. coli O157:H7 were both fed the high-concentrate diet. There was a significant (P < 0.05) positive correlation between fecal shedding and rumen volatile fatty acid concentration in calves fed a high-concentrate diet. The effects of diet on E. coli O157:H7 proliferation and acid resistance were investigated using an in vitro rumen fermentation system. Rumen fluid collected from steers fed a high-roughage diet, but not from steers fed a high-concentrate diet, supported the proliferation of E. coli O157:H7. Rumen fluid from steers fed a high-concentrate diet rapidly induced acid resistance in E. coli O157:H7. The impact of diet on fecal shedding of E. coli O157:H7 is still unclear and may depend on dietary effects on fermentation in the colon and on diet-induced changes in the resident microflora. However, rapid development of acid tolerance by E. coli O157:H7 in the rumens of calves fed high-concentrate diets, allowing larger populations to survive passage through the acidic abomasum to proliferate in the colon, may be one factor that influences fecal shedding in cattle on feed.     

Andreev Bound-State Tunneling and ESR Spectroscopy of High-Temperature Superconductors and Observations of Broken Time-Reversal Symmetry

An emphasis on reliable materials growth and development of new fabrication techniques has allowed us to investigate the electronic structure of high-temperature superconductors by planar quasiparticle tunneling and electron paramagnetic resonance (EPR) spectroscopies. The quasiparticle (QP) density of states (DoS) is investigated by tunneling into oriented thin films of Y₁Ba₂Cu₃O₇ (YBCO) and single crystals of Ba₂Sr₂Ca₁Cu₂O₈ (BSCCO). Data are obtained as a function of crystallographic orientation, temperature, doping, damage, and applied magnetic field. These data demonstrate that the observed zero-bias conductance peak (ZBCP) is composed of Andreev bound states (ABS) which intrinsically form at a symmetry-breaking interface of an unconventional superconductor, for example, a (110)-surface of d-wave YBCO. Tunneling into doped or ion-damaged YBCO provides a measure of the QP scattering rate below T _c. An applied field causes Doppler shift of the ABS, arising from the scalar product between the QP velocity and the superfluid momentum, v _F·P _s, observed as a splitting in the ZBCP. Magnetic hysteresis of the splitting is consistent with the effects of strong vortex pinning near the interface. The directional field dependence shows that the ABS is highly anisotropic in its transport. These results, plus in-plane crystallographic orientational dependence on single-crystal BSCCO, demonstrate the d-wave symmetry of this superconductor. Below 8 K and in zero applied field, the ZBCP splits, indicating a transition into a superconducting state with spontaneously broken time-reversal symmetry (BTRS). EPR experiments are used to detect directly the spontaneous formation of the magnetic moments in the BTRS state.     

Transients during 138-kV SF6 breaker switching of low inductivecurrents

The authors discusses the effects of switching low inductive currents with 138 kV SF₆ breakers in a petrochemical plant. Switching transients are believed to have contributed to the failure of a 13.8 kV PT and a 13.8 kV air magnetic circuit breaker. The high-frequency transient surge can transfer across a transformer due to transformer capacitances between the high- and low-voltage windings. The electromagnetic transient program system (ETPS) model and different case studies are discussed with the effect of different transformer winding capacitances. The interruption mechanism of low inductive currents is also described. This analysis demonstrates the need to conduct switching transient studies and the need for surge arresters on transformer secondary terminals under certain system conditions     

Temperature-controlled and constant-power radio-frequency ablation: what affects lesion growth?

Radio-frequency (RF) catheter ablation is the primary interventional therapy for the treatment of many cardiac tachyarrhythmias. Three-dimensional finite element analysis of constant-power (CPRFA) and temperature-controlled RF ablation (TCRFA) of the endocardium is performed. The objectives are to study: 1) the lesion growth with time and 2) the effect of ground electrode location on lesion dimensions and ablation efficiency. The results indicate that: a) for TCRFA: i) lesion growth was fastest during the first 20 s, subsequently the lesion growth slowed reaching a steady state after 100 s, ii) positioning the ground electrode directly opposite the catheter tip (optimal) produced a larger lesion, and iii) a constant tip temperature maintained a constant maximum tissue temperature; b) for CPRFA: i) the lesion growth was fastest during the first 20 s and then the lesion growth slowed; however, the lesion size did not reach steady state even after 600 s suggesting that longer durations of energy delivery may result in wider and deeper lesions, ii) the temperature-dependent electrical conductivity of the tissue is responsible for this continuous lesion growth, and iii) an optimal ground electrode location resulted in a slightly larger lesion and higher ablation efficiency.     

The effect of converting from pravastatin to simvastatin on the pharmacodynamics of warfarin

Glycosylated amino acids and glycosylated human serum albumin reduce nitrite to nitric oxide under anaerobic conditions. The amount of nitric oxide produced was recorded by generation of nitrosoHb from deoxyHb. Without preincubation after the addition of sodium nitrite, glucose or a mixture of glucose with amino acid or serum albumin did not cause spectrophotometrically detectible transformation of deoxyHb into nitrosoHb. The generation of NO increased with an increase in content of colored "final" products of amino acid and serum albumin glycosylation in the incubation mixture. The incubation of blood plasma of patients with diabetes mellitus with nitrite also resulted in the increased production of NO as compared to blood plasma of healthy subjects. During the incubation of healthy subjects' blood plasma with nitrite a small amount of NO was produced. The removal of low-molecular-weight compounds was accompanied by a significantly decreased generation of NO by blood plasma.     

Randomized controlled trial of effects of Escherichia coli antiserum on serum immunoglobulin G concentrations and morbidity and mortality rates in foals

OBJECTIVE: To determine whether administration of commercially available Escherichia coli antiserum to neonatal foals would affect serum IgG concentration or morbidity and mortality rates during the first 60 days of life. DESIGN: Randomized controlled trial. ANIMALS: 271 neonatal foals on 4 well-managed farms. PROCEDURE: Foals were randomly assigned to a treatment or control group. All foals were allowed to suckle colostrum normally. In addition, treatment-group foals were given E coli antiserum (10 micromilligrams) orally between 0 and 8 hours after birth. Serum samples were obtained between 18 and 36 hours after birth, and serum IgG concentration was determined. Foals were monitored for the first 60 days after birth, and causes of disease or death were recorded. RESULTS: Groups did not differ significantly in regard to breed, sex, month of birth, season of birth, age of dams, parity of dams, duration of gestation, or specific gravity of colostrum before suckling. In addition, groups did not differ significantly in regard to mean serum IgG concentration, prevalence of complete or partial failure of passive transfer of immunity, frequency or causes of disease, or frequency of death from infectious causes. CLINICAL IMPLICATIONS: In this group of foals on well-managed farms, administration of E coli antiserum did not alter serum IgG concentrations or morbidity and mortality rates during the first 60 days of life.     

Prevalence and predictors of sexual dysfunction in long-term survivors of marrow transplantation

PURPOSE: To describe the prevalence of sexual difficulties in men and women after marrow transplantation (MT), and to define medical, demographic, sexual, and psychologic predictors of sexual dysfunction 3 years after MT. PATIENTS AND METHODS: Four hundred seven adult MT patients were assessed pretransplantation. Survivors repeated measures of psychologic and sexual functioning at 1 and 3 years posttransplantation. RESULTS: Data were analyzed from 102 event-free 3-year survivors who defined themselves as sexually active. Men and women did not differ in sexual satisfaction pretransplantation. At 1 and 3 years posttransplantation, women reported significantly more sexual dysfunction than men. Eighty percent of women and 29% of men reported at least one sexual problem by 3 years after MT. No pretransplantation variables were significant predictors of 3-year sexual satisfaction for women. For men, pretransplantation variables of older age, poorer psychologic function, not being married, and lower sexual satisfaction predicted sexual dissatisfaction at 3 years (R2=.28; P < .001). Women who were more dissatisfied 3 years after MT did not receive hormone replacement therapy (HRT) at 1 -year posttransplantation and were less satisfied at 1 year, but not pretransplantation (R2=.35; P < .001). CONCLUSION: Sexual problems are significant in the lives of MT survivors, particularly for women. Although HRT before 1 year posttransplantation improves sexual function, it does not ensure sexual quality of life. Intervention for women is needed to apply hormonal, mechanical, and behavioral methods to prevent sexual difficulties as early after transplantation as possible.     

The guideline interchange format: a model for representing guidelines

Carboxylate and sulfate groups were introduced at the surface of poly(ethylene) (PE) samples. This was accomplished by coating and immobilizing sodium 10-undecenoate (C11(:)) and 10-undecene sulfate (S11(:)) on the polymer by means of an argon plasma treatment. The composition of the coated surfactant layer was proportional to the composition of the coating solution. The thickness of the surfactant layer on the surface of PE samples, which were precoated from an aqueous solution with a total surfactant concentration of 0.30 M, was about 55 A. The presence of carboxylate and sulfate groups after plasma treatment of the precoated surfaces was confirmed by X-ray photoelectron spectroscopy (XPS). About 20% of the initial amount of functional groups of the coated surfactants was retained at the PE surface. The ratio of carboxylate/sulfate groups at the plasma treated surfaces was dependent on the composition of the precoated surfaces. The minimum surface density of these groups on the resulting samples was about one group per 40 A2.