Resistance measurements and vortex fluctuations in two-dimensional superconducting films

Recently theories of vortex fluctuations in two-dimensional superconducting films have been compared to the experimentally determined power law dependence of voltage on current and to the temperature-dependent resistance in small applied fields. Here an alternative interpretation of the power law and a practical difficulty of flux pinning for measurements in small fields are pointed out. To illustrate these points, experimental examples are presented for very homogeneous granular aluminum films.     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Computer simulations of time-dependent suppression of EOF by polymer coatings

We use molecular dynamics simulations in order to investigate the time evolution of the effect of adsorbed polymer coatings on the electro-osmotic flow (EOF) in a capillary. Weakly adsorbed coatings show no time-dependent performance, but they do not strongly reduce the EOF. On the other hand, strongly adsorbed coatings made of longer polymer chains are often quenched in non-equilibrium conformations that can strongly reduce the EOF over extremely long periods of time. For intermediate adsorption strengths, we observe that the EOF increases as a function of time due to the relaxation of the coating layer. The concentration of polymers in solution and the length of the polymer chains also affect the time-dependence of the EOF. These results show that the quality of electrophoretic separations can depend on the waiting time between the formation of the coating and the beginning of the separation. We conclude by suggesting experimental tests of our predictions.     

Where does the end begin? Problems in musico-cognitive modeling

Research with computer systems and musical grammars into improvisation as found in the tabla drumming system of North India has indicated that certain musical sentences comprise (a) variable prefixes, and (b) fixed suffixes (or cadences) identical with those of their original rhythmic themes. It was assumed that the cadence functioned as a kind of target in linear musical space, and yet experiments showed that defining what exactly constituted the cadence was problematic. This paper addresses the problem of the status of cadential patterns, and demonstrates the need for a better understanding and formalization of ambiguity in musico-cognitive processing. It would appear from the discussion that the cadence is not a discrete unit in itself, but just part of an ever-present underlying framework comprising the entire original rhythmic theme. Improvisations (variations), it is suggested, merely break away from and rejoin this framework at important structural points. This endorses the theory of simultaneity. However, the general cognitive implications are still unclear, and further research is required to explore musical ambiguity and the interaction of musical, linguistic, and spatio-motor grammars.     

Fluctuating NMDA Receptor Subunit Levels in Perirhinal Cortex Relate to Their Dynamic Roles in Object Memory Destabilization and Reconsolidation

Reminder cues can destabilize consolidated memories, rendering them modifiable before they return to a stable state through the process of reconsolidation. Older and stronger memories resist this process and require the presentation of reminders along with salient novel information in order to destabilize. Previously, we demonstrated in rats that novelty-induced object memory destabilization requires acetylcholine (ACh) activity at M₁ muscarinic receptors. Other research predominantly has focused on glutamate, which modulates fear memory destabilization and reconsolidation through GluN2B- and GluN2A-containing NMDARs, respectively. In the current study, we demonstrate the same dissociable roles of GluN2B- and N2A-containing NMDARs in perirhinal cortex (PRh) for object memory destabilization and reconsolidation when boundary conditions are absent. However, neither GluN2 receptor subtype was required for novelty-induced destabilization of remote, resistant memories. Furthermore, GluN2B and GluN2A subunit proteins were upregulated selectively in PRh 24 h after learning, but returned to baseline by 48 h, suggesting that NMDARs, unlike muscarinic receptors, have only a temporary role in object memory destabilization. Indeed, activation of M₁ receptors in PRh at the time of reactivation effectively destabilized remote memories despite inhibition of GluN2B-containing NMDARs. These findings suggest that cholinergic activity at M₁ receptors overrides boundary conditions to destabilize resistant memories when other established mechanisms are insufficient.     

Potassium channels: a computer prediction of structure and selectivity

Model structures for the pore of the potassium channels Shakerand ROMK1 are predicted. The models arise from computer simulationsand suggest reasons for the striking selectivity of these channelsfor K+ and the blocking of ROMK1 by internal Mg²⁺. The modelledstructure of the Shaker pore is supported by mutagenesis data.The mutagenesis experiments indicate the side chains responsiblefor binding to blocking agents [tetraethylammonium (TEA) andcharybdotoxin (CTX)] and the model has these side chains suitablyoriented for binding. An aromatic K+ binding site part way downthe pore is also predicted by the Shaker pore model.     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

In-Plane Cracking Behavior and Ultimate Strength for 2D Woven and Braided Melt-Infiltrated SiC/SiC Composites Tensile Loaded in Off-Axis Fiber Directions

The tensile mechanical properties of ceramic matrix composites (CMC) in directions off the primary axes of the reinforcing fibers are important for the architectural design of CMC components that are subjected to multiaxial stress states. In this study, two-dimensional (2D)-woven melt-infiltrated (MI) SiC/SiC composite panels with balanced fiber content in the 0° and 90° directions were tensile loaded in-plane in the 0° direction and at 45° to this direction. In addition, a 2D triaxially braided MI SiC/SiC composite panel with a higher fiber content in the ±67° bias directions compared with the axial direction was tensile loaded perpendicular to the axial direction tows (i.e., 23° from the bias fibers). Stress–strain behavior, acoustic emission, and optical microscopy were used to quantify stress-dependent matrix cracking and ultimate strength in the panels. It was observed that both off-axis-loaded panels displayed higher composite onset stresses for through-thickness matrix cracking than the 2D-woven 0/90 panels loaded in the primary 0° direction. These improvements for off-axis cracking strength can in part be attributed to higher effective fiber fractions in the loading direction, which in turn reduces internal stresses on weak regions in the architecture, e.g., minicomposite tows oriented normal to the loading direction and/or critical flaws in the matrix for a given composite stress. Both off-axis-oriented panels also showed relatively good ultimate tensile strength when compared with other off-axis-oriented composites in the literature, both on an absolute strength basis as well as when normalized by the average fiber strength within the composites. Initial implications are discussed for constituent and architecture design to improve the directional cracking of SiC/SiC CMC components with MI matrices.