Hydrostatic Pressure Effect on Ga<Subscript>0.75</Subscript>Cr<Subscript>0.25</Subscript>As DMS: DFT Study

This paper studies the first-principles calculations of the effect of hydrostatic pressure on the structural, electronic and magnetic properties of Ga_0.75Cr_0.25As dilute magnetic semiconductor in zb (B3) phase. High-pressure behaviour of Ga_0.75Cr_0.25As has been investigated between 0 and 100 GPa. The calculations have been performed using DFT as implemented in code SIESTA using LDA + U as an exchange-correlation (XC) potential. The study of band structures shows half-metallic ferromagnetic nature with 100% spin polarization. Under application of external pressure, the valence band and conduction band are shifted from their positions which lead to modification of electronic structure.     

Non‐Volatile ReRAM Devices Based on Self‐Assembled Multilayers of Modified Graphene Oxide 2D Nanosheets

2D nanomaterials have been actively utilized in non‐volatile resistive switching random access memory (ReRAM) devices due to their high flexibility, 3D‐stacking capability, simple structure, transparency, easy fabrication, and low cost. Herein, it demonstrates re‐writable, bistable, transparent, and flexible solution‐processed crossbar ReRAM devices utilizing graphene oxide (GO) based multilayers as active dielectric layers. The devices employ single‐ or multi‐component‐based multilayers composed of positively charged GO (N‐GO(+) or NS‐GO(+)) with/without negatively charged GO(‐) using layer‐by‐layer assembly method, sandwiched between Al bottom and Au top electrodes. The device based on the multi‐component active layer Au/[N‐GO(+)/GO(‐)]_n/Al/PES shows higher ON/OFF ratio of ≈10⁵ with switching voltage of ?1.9 V and higher retention stability (≈10⁴ s), whereas the device based on single component (Au/[N‐GO(+)]_n/Al/PES) shows ≈10³ ON/OFF ratio at ±3.5 V switching voltage. The superior ReRAM properties of the multi‐component‐based device are attributed to a higher coating surface roughness. The Au/[N‐GO(+)/GO(–)]_n/Al/PES device prepared from lower GO concentration (0.01%) exhibits higher ON/OFF ratio (≈10⁹) at switching voltage of ±2.0 V. However, better stability is achieved by increasing the concentration from 0.01% to 0.05% of all GO‐based solutions. It is found that the devices containing MnO₂ in the dielectric layer do not improve the ReRAM performance.     

A machine learning system for identifying transmembrane domains from amino acid sequences

We present our machine learning system, that uses inductive logic programming techniques to learn how to identify transmembrane domains from amino acid sequences. Our system facilitates the use of operators such as ‘contains’, that act on entire sequences, rather than on individual elements of a sequence. The prediction accuracy of our new system is around 93%, and this compares favourably with earlier results. This work was carried out with the support of a research grant from ISIS, Fujitsu Laboratories.     

Biosorption of Cr(VI) by immobilized biomass of two indigenous strains of cyanobacteria isolated from metal contaminated soil

Biosorption of Cr(VI) using native strains of cyanobacteria from metal contaminated soil in the premises of textile mill has been reported in this paper. Biosorption was studied as a function of pH (1-5), contact time (5-180 min) and initial chromium ion concentration (5-20mg/l) to find out the maximum biosorption capacity of alginate immobilized Nostoc calcicola HH-12 and Chroococcus sp. HH-11. The optimum conditions for Cr(VI) biosorption are almost same for the two strains (pH 3-4, contact time 30 min and initial chromium concentration of 20mg/l) however, the biomass of Chroococcus sp. HH-11 was found to be more suitable for the development of an efficient biosorbent for the removal of Cr(VI) from wastewater, as it showed higher values of q(m) and K(f), the Langmuir and Freundlich isotherm parameters. Both the isotherm models were suitable for describing the biosorption of Cr(VI) by the cyanobacterial biosorbents.     

Electrodeposition and properties of nanocrystalline ZnO films prepared in the presence of anionic surfactant SDS and ionic liquid 1-butyl-3-methylimidazolium methylsulfate

ZnO thin films were potentiostatically electrodeposited on transparent tin oxide conducting glass substrates at ?1.0 V (vs. Ag/AgCl) in the presence of anionic surfactant, sodium dodecyl sulphate (SDS) and hydrophobic ionic liquid, 1-butyl-3-methylimidazolium methylsulfate [bmim][CH₃SO₄]. X-ray diffraction (XRD) investigation confirm the formation of nanocrystalline and stoichiometric ZnO thin films. Scanning electron microscopy (SEM) results reveal that the grain size of the deposited ZnO film is reduced from 85 to 28 nm when small amount of ionic liquid is added to the deposition bath. Photoluminescence study at room temperature shows a clear absorption edge in the ultra violet (UV) region confirming the high quality, nanocrystalline and stoichiometric nature of the deposited ZnO films.     

Crystallization and oxidation resistance properties of boron modified silicon oxycarbides derived from polymeric precursors by sol–gel method

Boron modified silicon oxycarbides (SiBOCs) were prepared from sol–gel derived pre-ceramic polymeric gels followed by pyrolysis at 950 °C under nitrogen. As-prepared SiBOC was found to be amorphous in nature and partially crystallized to SiO₂ at 1500 °C. The effect of boron incorporation on the crystallization of SiBOC was studied and the result revealed that the tendency to crystallization decreased with increasing boron content. This is due to the formation of Si–O–B bridges at higher temperatures, which retards the crystallization of SiO₂, evidenced from FTIR studies. SiBOC also exhibited excellent oxidation resistance ability at high temperature.     

Potentiometric studies of N,N′-Bis(2-dimethylaminoethyl)-N,N′-dimethyl-9,10 anthracenedimethanamine as a chemical sensing material for Zn(II) ions

A liquid membrane based Zn²⁺ ion selective electrode containing N,N′-Bis(2-dimethylaminoethyl)-N,N′-dimethyl-9,10 anthracenedimethanamine (Bis(TMEDA) anthracene) (I) as ionophore has been prepared and characterized. The membrane comprises of PVC, ionophore and plasticizer in the ratio of 33:2:65, respectively. It showed the best response in terms of detection limit (1.5 × 10^− 6 M) and working concentration range (1.0 × 10^− 5 M to 1.0 × 10^− 1 M) with Nernstian response towards Zn²⁺ ions. The electrode responds within 15 s of coming in contact with the solution. The potential response remains almost unchanged over a pH range of 3.0 to 7.5. The electrode can be used for at least 3 months without any considerable alteration in its response behavior. The proposed electrode revealed good selectivity towards Zn²⁺ ions over a number of alkali, alkaline earth, transition metals and some other heavy metal ions. The electrode has been used as an indicator electrode in the potentiometric titration of Zn²⁺ with EDTA. The proposed electrode also detected Zn²⁺ ions from real life samples.     

Optimum operating conditions for an adsorption cryocooler: a case of activated carbon + nitrogen system

Adsorption cryocoolers are among the possible options for obtaining cryogenic temperatures, in particular for small cooling capacity applications such as cooling of infra red detectors. They need to be optimized for liquid yield. The performance of thermal compressors therein pivots around the adsorption characteristics of the adsorbent + adsorbate combination and how effectively one could pack requisite amounts of adsorbent into a given volume of the compressor housing. In addition, the overall performance of the cooler is a function of limits of operating temperatures and pressures across the compressor. This paper proposes a performance indicator—the product of liquid yield and the uptake efficiency of the compressor—and evaluates its values for various possible operating conditions for one specimen of activated carbon. It is shown that there is a limited domain of operation and that there is a condition of best performance within that domain.     

Numerical solution of heat transfer in micropolar fluid flow in a channel with porous walls

Using the basic equations of heat conducting micropolar fluid, heat transfer through a channel of porous walls has been studied. The temperature distribution is obtained for different values of suction parameter $\text{S}$, convective parameter $\text{E}$ and micropolar parameter $\text{R}$.     

Heat transfer in micropolar boundary layer flow near a stagnation point

Using the micropolar theory, a set of boundary layer equations are obtained for the two dimensional flow of an incompressible micropolar fluid near a stagnation point. The boundary conditions of isothermal and insulated wall are taken with VISCOUS DISSIPATION effects. Numerical results for the temperature distribution has been shown graphically for different values of the material parameters and Prandtl number.