Acid-base,electron-donating and magnetic properties of Nd2O3 and its mixed oxides with alumina catalysts

The electron donor properties of Nd₂O₃ activated at 300, 500 and 800°C were investigated through studies on the adsorption of electron acceptors of various electron affinities — 7, 7, 8, 8-tetracyanoquinodimethane (2.84 eV), 2, 3, 5, 6-tetrachloro-1, 4-benzoquinone (2.40 eV), p-dinitrobenzene (1.77 eV), and m-dinitrobenzene (1.26 eV) in solvents acetonitrile and 1, 4-dioxan. The extent of electron transfer during adsorption has been found from magnetic measurements and electronic spectral data. The corresponding data on mixed oxides of neodymium and aluminium are reported for various compositions. The acid-base properties of catalysts were also determined using a set of Hammett indicators.     

Fixed-width confidence interval estimation of the inverse coefficient of variation in a normal population

A sequential procedure is developed in order to construct a confidence interval of “fixed-width and preassigned coverage probability” for the inverse of the coefficient of variation of a normal population. The proposed sequential procedure is proved to be “asymptotically efficient and consistent” in the sense of Chow and Robbins ([1]: Ann. Math. Statist. 36, 457–462 (1965)). Asymptotic distribution of the stopping time is derived.     

The yields of extracted leaf protein from lucerne (Medicago sativa L.)

The effects of fertilisers, frequency of cutting, row spacing and simazine on the yields of dry matter and extractable protein from lucerne (Medicago sativa L.) were studied using the laboratory-scale pulper and press. Between 40 and 65% protein nitrogen was extractable; extractability was not affected by the various treatments but altered with season. Lucerne responded with increased yields of dry matter and extractable protein to fertilisers, simazine (35 g/ha) and rows spaced at 30.5 cm. Six or 8 harvests were found to give greater yields than 5 harvests in 180 days. The annual yields of extractable protein reached 3100 kg/ha and it is felt that better control of pests could lead to even greater yields.     

Modulation of cell growth and apoptosis response in human prostate cancer cells supplemented with tocotrienols

Previous studies have shown that tocotrienols are powerful growth inhibitors and potent inducers of apoptosis in human breast cancer cells. The objective of the current study was to examine effects of tocotrienols on apoptotic signals in androgen‐independent PC‐3 human prostate cancer cells. We investigated the effects of the tocotrienol‐rich fraction (TRF) from palm oil, α‐tocopherol (αT), α‐tocotrienol (αT₃), γ‐tocotrienol (γT₃) and δ‐tocotrienol (δT₃) on PC‐3 cell growth. TRF inhibited PC‐3 growth with a nonlinear response, with complete growth suppression at 10 µg/mL. δT₃ and γT₃ showed complete cell inhibition at 8 µg/mL whilst αT had no effect. δT₃ and γT₃ showed the most promise in the cell growth assays, and all subsequent experiments were performed with δT₃, TRF and αT. TRF and δT₃ at 8 µg/mL induced apoptosis in PC‐3 cells after 48 h of treatment. In addition, TRF and δT₃ treatments were able to affect the cell cycle, with accumulation in the S phase, G2 phase block and increases in SubG1 by 72 h. We then proceeded to investigate the expression levels of Fas receptor and Fas ligand, caspase 8, caspase 3 and bax in PC‐3 cells following treatment with tocotrienols using real‐time PCR and Western blot methods. TRF and δT₃ at 8 µg/mL increased Fas ligand expression levels by 368 and 456%, respectively, after 24 h and Fas receptor expression levels by 210% and 356%, respectively, after 48 h. TRF‐ and δT₃‐treated PC‐3 cells overexpressed caspase 8 and bax protein after 24 h, and caspase 3 after 48 h. In conclusion, tocotrienols are able to induce apoptosis and cell cycle arrest in PC‐3 cells, with increased expression of Fas receptor, Fas ligand, caspase 8, caspase 3 and bax, suggesting a potential role in chemoprevention of prostate cancer.     

Liquid phase benzoylation of arenes over iron promoted sulphated zirconia

The present work undertakes the preparation and physico-chemical characterisation of iron promoted sulphated zirconia (SZ) with different amounts of iron loading and their application to Friedel–Crafts benzoylation of benzene, toluene and xylene under different experimental conditions. XRD and laser Raman techniques reveal the stabilisation of the tetragonal phase of zirconia and the existence of iron in highly dispersed form as Fe₂O₃ on the catalyst surface. The surface acidic properties were determined by ammonia temperature programmed desorption (TPD) and perylene adsorption. The results were supported by the TGA studies after adsorption of pyridine and 2,6-dimethylpyridine (2,6-DMP). Strong Lewis acid sites on the surface, which are evident from TPD and perylene adsorption studies, explain the high catalytic activity of the systems towards benzoylation. The experimental results provide evidence for the truly heterogeneous nature of the reaction. The studies also establish the resistance to deactivation in the metal incorporated sulphated systems.     

Effect of stabilisation treatment of rice bran on functional properties of protein concentrates

The functional properties of differently dried protein concentrates prepared from unstabilised, acid-stabilised, heat-stabilised and parboiled rice bran were evaluated. Freeze-dried protein concentrates from all types of bran exhibited similar nitrogen solubilities. Both cabinet-and roller-dried protein concentrates had lower nitrogen solubilities than freeze-dried samples except for cabinet-dried concentrate from heat-stabilised bran. The functional properties (bulk density, water and fat absorption, emulsification and foaming capacity) of protein concentrates prepared from acid-stabilised rice bran were not significantly different from those prepared from untreated bran. Freeze-dried protein concentrates from both heat-stabilised and parboiled rice bran had low water absorption capacity and high fat absorption capacity. Cabinet-dried samples did not exhibit any foaming or emulsification capacity, thereby indicating a greater extent of denaturation. Thus, the study indicated that in addition to stabilisation treatment functionality was also influenced by the drying technique employed.     

On the Mechanisms Governing Aluminum-Mediated Solid-Phase Epitaxy of Silicon

Mechanisms governing the aluminum-mediated solid-phase epitaxy of Si on patterned crystalline Si substrates have been identified by studying the deposited material as a function of growth conditions when varying parameters such as temperature, growth time, and layer-stack properties. Early growth stages can be discerned as first formation of “free” Si at the Al/α-Si interface, then diffusion of Si along the Al grain boundaries, nucleation at the Si substrate surface, nuclei rearrangement, and finally crystal growth. The acquired understanding is applied to control the selectivity and completeness of single-crystal growth in various sizes of contact windows to the Si substrate.     

Optimization of preparation conditions on the dielectric properties of polyaniline

The dielectric response in the microwave field of polyaniline prepared at different temperatures and using different inorganic and organic dopants was studied. Chemical oxidative polymerization of aniline was done at low temperature (0–5°C), at room temperature, and at high (60°C) temperature using different inorganic dopants like HCl, HNO₃, H₂SO₄, HClO₄, etc. Polyaniline was also prepared with different organic dopants like camphor sulfonic acid, Toluene sulfonic acid, and Naphthalene sulfonic acid. All polymers formed were characterized using IR, TGA, DSC, and SEM, etc. The dielectric responses of all polymers are studied using cavity perturbation technique in the microwave field. The studies indicates that the polyaniline prepared with perchloric acid at room temperature shows higher conductivity and absorption coefficient compared with all other samples. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Relative importance of the lift force on heavy particles due to turbulence driven secondary flows

Saffman lift forces on dense particles due to gradients in both streamwise and cross-stream velocities in a downward, fully developed turbulent square duct flow at Re_τ = 360 are studied using large eddy simulations. Volume fraction of the dispersed phase is low enough (≤ 10^− 5) that the one-way coupling approach is reasonable, i.e., two-way coupling and particle-particle collisions are not considered. Eulerian and Lagrangian approaches are used to treat the continuous and dispersed phases, respectively. Subgrid stresses are modeled with the dynamic subgrid kinetic energy model of Kim and Menon [W.W. Kim and S. Menon. Application of the localized dynamic subgrid-scale model to turbulent wall-bounded flows, AIAA 97-0210, 1997.]. The particle equation of motion includes drag, lift forces due to both the streamwise and cross-stream velocity gradients, gravity, and is integrated using the fourth-order accurate Runge-Kutta scheme. Dependence of particle drag and lift forces on duct cross-sectional location and particle response time is demonstrated using the mean value contours and probability density functions (PDFs) of particle forces. It is shown that the streamwise component of the mean drag force experienced by particles of all response times is a deceleration force, i.e. on average, fluid streamwise velocity lags the particle streamwise velocity. Secondly, the two wall-normal (or lateral) components of the mean drag force are oriented such that the particles experience a net mean force toward the duct corners. PDFs of particle drag force components show that smaller response time particles experience a wider range of drag force about the mean value, as compared to the more inertial particles. Contours of mean wall-normal lift forces due to streamwise velocity gradients show that this force predominantly acts toward the duct walls and that the maximum lift force occurs close to the walls. PDFs of lift force due to streamwise velocity gradients show that the range of fluctuations increases with particle response time, but the dependence on particle response time is weaker compared to drag force. Lift forces due to cross-stream velocity gradients are at least an order of magnitude smaller than lift forces due to streamwise velocity gradients and are found to decrease in their range of fluctuations with particle response time. It is demonstrated that lift forces due to secondary flow velocity gradients are not as important as those due to streamwise velocity gradients in a square duct flow.     

Essential Oil of <Emphasis Type="Italic">Artemisia scoparia</Emphasis> Inhibits Plant Growth by Generating Reactive Oxygen Species and Causing Oxidative Damage

We investigated the chemical composition and phytotoxicity of the essential oil extracted from leaves of Artemisia scoparia Waldst. et Kit. (red stem wormwood, Asteraceae). GC/GC-MS analyses revealed 33 chemical constituents representing 99.83% of the oil. The oil, in general, was rich in monoterpenes that constitute 71.6%, with β-myrcene (29.27%) as the major constituent followed by (+)-limonene (13.3%), (Z)-β-ocimene (13.37%), and γ-terpinene (9.51%). The oil and β-myrcene were evaluated in a dose–response bioassay under laboratory conditions for phytotoxicity against three weeds—Avena fatua, Cyperus rotundus, and Phalaris minor. A significant reduction in germination, seedling growth, and dry matter accumulation was observed in the test weeds. At the lowest treatment of 0.07 mg/ml Artemisia oil, germination was reduced by 39%, 19%, and 10.6% in C. rotundus, P. minor, and A. fatua, respectively. However, the inhibitory effect of β-myrcene was less. In general, a dose-dependent effect was observed and the growth declined with increasing concentration. Among the three weeds, the inhibitory effect was greatest on C. rotundus, so it was selected for further studies. We explored the explanation for observed growth inhibition in terms of reactive oxygen species (ROS: lipid peroxidation, membrane integrity, and amounts of conjugated dienes and hydrogen peroxide)-induced oxidative stress. Exposure of C. rotundus to Artemisia oil or β-myrcene enhanced solute leakage, indicating membrane disintegration. There were increased levels of malondialdehyde and hydrogen peroxide, indicating lipid peroxidation and induction of oxidative stress. We conclude that Artemisia oil inhibits plant root growth through generation of ROS-induced oxidative damage.