Renoprotective Angiographic Polymersomes

Computed tomography (CT) angiography is powerful for the diagnosis of vascular diseases. Unfortunately, this method usually requires a high dosage of iodinated contrast agents, which can lead to severe elevation of reactive oxygen species (ROS) levels within kidneys. This causes oxidative stress, apoptosis, and hence contrast-induced nephropathy (CIN), a leading cause of iatrogenic renal failure, especially for patients with renal insufficiency. Herein, a route is shown to circumvent such problems with the usage of rationally designed renoprotective angiographic polymersomes (RAPs) as blood pool CT contrast agents. RAPs are biodegradable nanoparticles prepared via self-assembly of poly(ethylene oxide)-block-poly(triiodobenzoic chloride-conjugated polylysine-stat-phenylboronic acid pinacol ester-conjugated polylysine) (PEO₄₅-b-P[(Lys-IBC)₄₅-stat-(Lys-PAPE)₁₅]). The key to the efficiency of such nanoparticles as renoprotective contrast agents arises from the rationally chosen repeat units: Lys-IBC exhibits a concentration-dependent X-ray attenuation capability and Lys-PAPE introduces an ROS-scavenging ability to the polymersome. The study shows that RAPs can reduce the risk of CIN in mice with kidney injury. Additionally, a 5-fold increase in angiographic live time is observed using RAPs, compared to commonly used iodinated small molecule contrast agents. In summary, a new strategy is proposed for the design of a renoprotective angiographic contrast agent that is capable of reducing the risk of CIN.     

Binary Cellulose Nanocrystal Blends for Bioinspired Damage Tolerant Photonic Films

Most attempts to emulate the mechanical properties of strong and tough natural composites using helicoidal films of wood‐derived cellulose nanocrystals (w‐CNCs) fall short in mechanical performance due to the limited shear transfer ability between the w‐CNCs. This shortcoming is ascribed to the small w‐CNC‐w‐CNC overlap lengths that lower the shear transfer efficiency. Herein, we present a simple strategy to fabricate superior helicoidal CNC films with mechanical properties that rival those of the best natural materials and are some of the best reported for photonic CNC materials thus far. Assembling the short w‐CNCs with a minority fraction of high aspect ratio CNCs derived from tunicates (t‐CNCs), we report remarkable simultaneous enhancement of all in‐plane mechanical properties and out‐of‐plane flexibility. The important role of t‐CNCs is revealed by coarse grained molecular dynamics simulations where the property enhancement are due to increased interaction lengths and the activation of additional toughening mechanisms. At t‐CNC contents greater than 5% by mass the mixed films also display UV reflecting behaviour. These damage tolerant optically active materials hold great promise for application as protective coatings. More broadly, we expect the strategy of using length‐bidispersity to be adaptable to mechanically enhancing other matrix‐free nanoparticle ensembles.     

Micrometer‐Scale Porous Buckling Shell Actuators Based on Liquid Crystal Networks

Micrometer‐scale liquid crystal network (LCN) actuators have potential for application areas like biomedical systems, soft robotics, and microfluidics. To fully harness their power, a diversification in production methods is called for, targeting unconventional shapes and complex actuation modes. Crucial for controlling LCN actuation is the combination of macroscopic shape and molecular‐scale alignment in the ground state, the latter becoming particularly challenging when the desired shape is more complex than a flat sheet. Here, one‐step processing of an LCN precursor material in a glass capillary microfluidic set‐up to mold it into thin shells is used, which are stretched by osmosis to reach a diameter of a few hundred micrometers and thickness on the order of a micrometer, before they are UV crosslinked into an LCN. The shells exhibit radial alignment of the director field and the surface is porous, with pore size that is tunable via the osmosis time. The LCN shells actuate reversibly upon heating and cooling. The decrease in order parameter upon heating induces a reduction in thickness and expansion of surface area of the shells that triggers continuous buckling in multiple locations. Such buckling porous shells are interesting as soft cargo carriers with capacity for autonomous cargo release.     

Iterative Joint Channel Estimation and Signal Detection for OFDM System in Double Selective Channels

Intercarrier interference caused by fast time-varying multipath fading channels degrades the system performance of high-mobility orthogonal frequency division multiplexing systems. This study considers the challenging problem of joint channel estimation and signal detection in high mobility environments. The estimation method is based on a pilot-aided linear approximation channel modeling and iterative process. After each iteration, the channel estimates are refined with the fed-back detection signal. The channel is re-estimated iteratively, detected increasingly reliable signals. The proposed method is independent of the Doppler-spectrum, delay-profile shape and the number of paths. Numerical simulation results indicate that the proposed method is highly robust to fast time-varying multipath fading channels.     

Robust Single Molecule Magnet Monolayers on Graphene and Graphite with Magnetic Hysteresis up to 28 K

The chemical functionalization of fullerene single molecule magnet Tb₂@C₈₀(CH₂Ph) enables the facile preparation of robust monolayers on graphene and highly oriented pyrolytic graphite from solution without impairing their magnetic properties. Monolayers of endohedral fullerene functionalized with pyrene exhibit magnetic bistability up to a temperature of 28 K. The use of pyrene terminated linker molecules opens the way to devise integration of spin carrying units encapsulated by fullerene cages on graphitic substrates, be it single-molecule magnets or qubit candidates.     

Determination of PCBs in fatty tissues by means of several detection techniques

Difficulties with harmonization of analytical procedures and consequently poor comparability of generated data represent in the Czech Republic the main reason for the delay in issuing of updated legislation for polychlorobiphenyls (PCBs) in foodstuffs. This study draws attention to possible errors (overestimations) that can occur during routine determination of these residues in the fat portion of biotic matrices. We demonstrate the gas Chromatographic (GC) conditions under which interfering contaminants such as phthalates and/or chlorinated pesticides can be separated from analytes. Discussion is focused on the advantages and drawbacks of GC with an electron capture detector, GC mass spectrometry and GC with an atomic emission detector. Various approaches used for calculation of PCBs contents are compared.

---

Bestimmung der PCB in Fettgeweben mittels verschiedener Detektionstechniken

Zusammenfassung Das Problem mit der Harmonisierung der analytischen Verfahren und der geringen Vergleichbarkeit der Angaben ist ein Hauptgrund der Verspätung in der neuen Legislative für PCB in Lebensmitteln in der Tschechischen Republik. Die Arbeit beschreibt die möglichen Fehler (Falsch-positive Fehler), die durch die routinierte Bestimmung von PCB-Rückständen in Fettanteilen der biologischen Materialien auftreten können. Es werden die gaschromatographischen Bedingungen beschrieben, unter denen die Interferenzen, wie z. B. Phthalaten und chlorierten Pesticiden, von Stoffen abgetrennt werden können. Die Vorteile und Nachteile der Methoden GC-ECD, GC-MS und GC-AED werden diskutiert. Die verschiedenen für die Kalkulation des PCB-Gehaltes angewendeten Annäherungen werden miteinander verglichen.

     

Design rules for an integratable low-power amplifier/filter combination

In this paper design rules for a circuit topology in which there is an inseparable combination of an amplifier and a filter characteristic, are presented. By intentionally using the capacitance of an already present input sensor for the filtering, the total required integrated capacitance is much less than that in circuits, which have a separately designed amplifier and filter function. Consequently, it is possible to have the advantage of a better integratability. Moreover, less complexity in the design is achieved. The presented circuit shows a current-to-voltage conversion and an inherently controllable second-order low-pass filter characteristic. A discrete realization has been designed to test the circuit. This circuit operates down to a 1 V supply voltage and the transfer shows a 1.8 M currentto-voltage conversion with a bandwidth of 6 kHz. Measurement results of this circuit show that a 63 dB dynamic range can be achieved with a total required integrated capacitance of only 31 pF.     

On the operational and manufacturing tolerances of GaAs-AlAs MQWmodulators

We approach the question of optimization of surface-normal p-i(multiquantum-well, MQW)-n modulators from the viewpoint of investigating their tolerance to variations in wavelength and temperature and errors in manufacture. The reflection characteristics of two high-quality samples are carefully processed to eliminate Fabry-Perot fringes, and then their spectra at any bias are characterized with six phenomenological parameters which depend on λ₀, the zero-field exciton position. The two GaAs-AlAs samples have λ₀'s of 833.8 and 842.3 nm, and so cover a range useful for modulators designed to operate near 850 nm in the normally reflecting condition, i.e., reflection decreases with field. A linear interpolation of the parameters of these two samples is used to predict the behavior of MQW diodes with λ₀'s around this range, and so a fully comprehensive examination of normally reflecting MQW modulators is performed. The performance aspect that is examined is contrast ratio as a function of nonuniformities in the devices or operating conditions given a voltage swing of 3 V. There are two operational modes discussed. If the voltage offset of the bias is allowed to vary via a feedback circuit, a contrast of 2:1 may be maintained over an operating wavelength change (Δλ) of 17 nm with local variations of wavelength of ±1 nm, which corresponds to a temperature variation of 60°C while allowing for variations of laser driver wavelength of ±1 nm. If feedback Is not permitted, we determine that, given tolerances to manufacturing errors, a contrast of 1.5:1 may be maintained over a wavelength range of ~5 nm by either using stacked diode designs or extremely shallow quantum wells     

内存碎片处理技术

即使在系统中事实上仍然有许多空闲内存时,内存碎片还会最终导致出现内存用完的情况.一个不断产生内存碎片的系统,不管产生的内存碎片多么小,只要时间足够长,就会将内存用完.     

The Role of Test Protocols in Automated Test Generation for Embedded-Core-Based System ICs

Modular testing is an attractive approach to testing large system ICs, especially if they are built from pre-designed reusable embedded cores. This paper describes an automated modular test development approach. The basis of this approach is that a core or module test is dissected into a test protocol and a test pattern list. A test protocol describes in detail how to apply one test pattern to the core, while abstracting from the specific test pattern stimulus and response values. Subsequent automation tasks, such as the expansion from core-level tests to system-chip-level tests and test scheduling, all work on test protocols, thereby greatly reducing the amount of compute time and data involved. Finally, an SOC-level test is assembled from the expanded and scheduled test protocols and the (so far untouched) test patterns. This paper describes and formalizes the notion of test protocols and the algorithms for test protocol expansion and scheduling. A running example is featured throughout the paper. We also elaborate on the industrial usage of the concepts described.