Impact of electrically formed interfacial layer and improved memory characteristics of IrOx/high-κx/W structures containing AlOx,GdOx, HfOx,and TaOx switching materials

Improved switching characteristics were obtained from high-κ oxides AlO_x, GdO_x, HfO_x, and TaO_x in IrO_x/high-κ_x/W structures because of a layer that formed at the IrO_x/high-κ_x interface under external positive bias. The surface roughness and morphology of the bottom electrode in these devices were observed by atomic force microscopy. Device size was investigated using high-resolution transmission electron microscopy. More than 100 repeatable consecutive switching cycles were observed for positive-formatted memory devices compared with that of the negative-formatted devices (only five unstable cycles) because it contained an electrically formed interfacial layer that controlled ‘SET/RESET’ current overshoot. This phenomenon was independent of the switching material in the device. The electrically formed oxygen-rich interfacial layer at the IrO_x/high-κ_x interface improved switching in both via-hole and cross-point structures. The switching mechanism was attributed to filamentary conduction and oxygen ion migration. Using the positive-formatted design approach, cross-point memory in an IrO_x/AlO_x/W structure was fabricated. This cross-point memory exhibited forming-free, uniform switching for >1,000 consecutive dc cycles with a small voltage/current operation of ±2 V/200 μA and high yield of >95% switchable with a large resistance ratio of >100. These properties make this cross-point memory particularly promising for high-density applications. Furthermore, this memory device also showed multilevel capability with a switching current as low as 10 μA and a RESET current of 137 μA, good pulse read endurance of each level (>10⁵ cycles), and data retention of >10⁴ s at a low current compliance of 50 μA at 85°C. Our improvement of the switching characteristics of this resistive memory device will aid in the design of memory stacks for practical applications.     

The Role of Vitamin A in Retinal Diseases

Vitamin A is an essential fat-soluble vitamin that occurs in various chemical forms. It is essential for several physiological processes. Either hyper- or hypovitaminosis can be harmful. One of the most important vitamin A functions is its involvement in visual phototransduction, where it serves as the crucial part of photopigment, the first molecule in the process of transforming photons of light into electrical signals. In this process, large quantities of vitamin A in the form of 11-cis-retinal are being isomerized to all-trans-retinal and then quickly recycled back to 11-cis-retinal. Complex machinery of transporters and enzymes is involved in this process (i.e., the visual cycle). Any fault in the machinery may not only reduce the efficiency of visual detection but also cause the accumulation of toxic chemicals in the retina. This review provides a comprehensive overview of diseases that are directly or indirectly connected with vitamin A pathways in the retina. It includes the pathophysiological background and clinical presentation of each disease and summarizes the already existing therapeutic and prospective interventions.     

Antivirulence Isoquinolone Mannosides: Optimization of the Biaryl Aglycone for FimH Lectin Binding Affinity and Efficacy in the Treatment of Chronic UTI

Uropathogenic E. coli (UPEC) employ the mannose‐binding adhesin FimH to colonize the bladder epithelium during urinary tract infection (UTI). Previously reported FimH antagonists exhibit good potency and efficacy, but low bioavailability and a short half‐life in vivo. In a rational design strategy, we obtained an X‐ray structure of lead mannosides and then designed mannosides with improved drug‐like properties. We show that cyclizing the carboxamide onto the biphenyl B‐ring aglycone of biphenyl mannosides into a fused heterocyclic ring, generates new biaryl mannosides such as isoquinolone 22 (2‐methyl‐4‐(1‐oxo‐1,2‐dihydroisoquinolin‐7‐yl)phenyl α‐d ‐mannopyranoside) with enhanced potency and in vivo efficacy resulting from increased oral bioavailability. N‐Substitution of the isoquinolone aglycone with various functionalities produced a new potent subseries of FimH antagonists. All analogues of the subseries have higher FimH binding affinity than unsubstituted lead 22 , as determined by thermal shift differential scanning fluorimetry assay. Mannosides with pyridyl substitution on the isoquinolone group inhibit bacteria‐mediated hemagglutination and prevent biofilm formation by UPEC with single‐digit nanomolar potency, which is unprecedented for any FimH antagonists or any other antivirulence compounds reported to date.     

Polyacrylate-coated graphene-oxide and graphene solution via chemical route for various biological application

In this work, we have developed a polyacrylate-coated graphene-oxide and then chemically reduced them into graphene. We found that polyacrylate coating can improve the colloidal stability of both graphene-oxide/graphene. They show good colloidal stability in different aqueous buffer solution with pH ranging from 5 to 10, and these solutions are stable for more than a month. The polyacrylate-coated grapheme oxide/graphene has been characterized by X-ray photoemission spectroscopy (XPS) and micro-Raman spectroscopy. Based on good colloidal stability, this graphene-oxide/graphene is most suitable for the biological application.     

Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method

High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 μm in length, 10 μm in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles.     

Effect of propylation on the characteristics of corn starch and variation of properties with different degrees of substitution

Corn starch was modified by propylation with different degree of substitution (DS). DS of four starch modifications were 0.61, 1.56, 2.27, and 2.51. Samples were characterized by FTIR, XRD, TG‐DTA, swelling power, solubility, water binding capacity, and light transmittance. Results of the systematic physico‐chemical characterization of the starch modification in comparison with the native starch have been documented in the article. Results showed that during propylation, the crystalline structure of starch got destroyed and surface of the starch was eroded. Propylated starch (DS 2.51) showed 85% weight loss at temperatures from 300 to 400°C, whereas the native starch underwent similar weight loss (83%) from 250 to 300°C. Swelling power and water binding capacity of native starch (DS 0.0) were 3.09 g/g and 89.8%, respectively. However, in propylated starch at low DS (DS 0.61), swelling power and water binding capacity increased to 10.55 g/g and 136.8% under same conditions. At high DS (DS 2.51), swelling power was similar to native starch at 65°C, whereas solubility and water binding capacity decreased to below that of native starch. Light transmittance of propylated starch with high DS (DS 2.51) increased dramatically compared with native starch. Propylation improved the hydrophobic transformation and thermal stability of starch at high DS. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Derivation and validation of a binary multi-fluid Eulerian model for fluidized beds

The paper presents a multi-fluid Eulerian model derived from binary kinetic theory of granular flows, free path theory and an empirical friction theory. The effects of the inter- and inner-particle collisions, particle translational motions and particle–particle friction are included. As the effects due to fluiddynamic particle velocity differences and particle–particle friction are considered, some unconventional terms are produced compared with the previous models. Model validation using the data from Mathiesen et al. (2000) shows that the coupling terms give a stronger and more realistic particle–particle coupling because the effects due to the fluiddynamic velocity differences are considered. The model gives reasonable predictions of the particle volume fraction, particle velocities and velocity fluctuations. The model analysis reveals that the basic particle velocity fluctuations constitute 2 terms: the velocity fluctuations of the discrete particles, and the velocity fluctuations of the continuous fluid flow. Furthermore, the simulation results show that the velocity fluctuations of the continuous fluid flow are dominant in a binary riser flow.     

Natural fiber composites of high‐temperature thermoplastic polymers: Effects of coupling agents

Our earlier paper (Jana, S.C.; Prieto, A. J Appl Polym Sci 2002, 86, 2159) on the development of natural fiber composites of high‐performance thermoplastic polymers described a new methodology for the manufacturing of composite materials of a high‐temperature thermoplastic polymer, poly(phenylene ether) (PPE) and wood flour, a cellulosic natural filler. A thermosetting epoxy, used as a reactive solvent, reduced the processing temperature of PPE/epoxy blends to well below the decomposition temperature of natural fillers. In addition, the epoxy component, upon polymerization, formed coating layers around the filler particles to provide resistance against moisture diffusion and attacks by acids and alkali. This article describes the results of an investigation on two outstanding issues: (1) the influence of cellulosic wood particles and coupling agents on the speed of epoxy curing and reaction‐induced phase separation and (2) the effects of coupling agents on the morphology of crosslinked epoxy at the surfaces of natural fillers and mechanical properties of the composites. It was found that wood particles expedited epoxy curing in the composites; the extent of epoxy curing, however, was reduced in the presence of coupling agents. Also, the coupling agents promoted complete coverage of wood flour particles by polymerized epoxy, although the mechanical properties deteriorated over systems without coupling agents. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2168–2173, 2002     

The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium

Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate the effect of the lignin concentration on microstructure, morphology, phase composition, thermal behavior and cytotoxicity of the HAP/Lig coatings. An organosolv lignin was used for the production of the composite coatings studied in this research. The properties of HAP/Lig coatings were characterized using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR) and X-ray photoelectron spectroscopy (XPS), as well as the MTT test of cytotoxicity. The results showed that higher lignin concentrations protected the HAP lattice during sintering, thereby improving the stability of the HAP/Lig coatings. The cell survival of peripheral blood mononuclear cells (PBMC) after proliferation indicates that the HAP/Lig coating with 1 wt% Lig electrodeposited on titanium was non-toxic with significant promise as a potential bone-repair material.