Silicon oxide thin films prepared by a photo-chemical vapour deposition technique

Wide band gap a-SiO_x:H films have been prepared by the photochemical decomposition of a SiH₄, CO₂ and H₂ gas mixture. Deposition parameters namely the CO₂ to SiH₄ gas flow ratio, H₂ dilution and chamber pressure were optimized in order to achieve highly photoconducting (1 × 10^-6 S cm^-1) films with an optical gap of 1.99 eV. The optical gap was found to increase with an increase in the CO₂ to SiH₄ flow ratio. A decrease in the photoconductivity, refractive index, spin g-value and a simultaneous increase in the spin density are attributed to an incorporation of oxygen into the films. Upon hydrogen dilution the photoconductivity of a-SiO_x:H films was observed to improve along with an increase of the optical gap. The spin density of a-SiO_x:H films was of the order of 10¹⁷ cm^-9. The optoelectronic properties of the films have been correlated with the bonding configurations in the film, deposition parameters and the growth kinetics. This revised version was published online in November 2006 with corrections to the Cover Date.     

Effect of Zr (IV) doping on the optical properties of sol–gel based nanostructured indium oxide films on glass

Zr (IV) doped indium oxide thin films (55 nm) were deposited onto pure silica glass by the sol–gel dip coating technique utilizing the precursors of 6 wt% equivalent oxide content. Three different Zr (IV) oxide (ZrO₂) dopant concentrations (5.0, 10.0 and 15.0 wt% w.r.t. total oxides) were chosen. XRD patterns suggested the films were of distinct cubic symmetry of In₂O₃. Nanostructured surface feature was revealed by FESEM images. Average cluster size decreased with increasing dopant concentration as evidenced from TEM study. Blue shift of band gap and UV cut off wavelength (lambda-50) occurred with increase in dopant concentration. The refractive index gradually increased with doping. Baking atmosphere plays an important role in tailoring the refractive index (RI) of the films and relatively high RI was obtained in the case of baking in pure oxygen. Presence of both free and bound excitons was detected by the photoluminescence (PL) study. The 5 wt% doped film exhibited relatively high PL intensity at 380 nm responsible for free exciton. The PL emissions gradually quenched with increase in dopant concentration. Similar behaviour was also observed when the film was baked in pure oxygen atmosphere.     

Hall effects on hydromagnetic flow over an impulsively started porous plate

Summary An exact solution has been obtained for the problem of Hall effects on the hydromagnetic flow due to an impulsive start of a porous flat plate. It is observed that in the initial stages there is no inertial oscillation while at large time the steady state is reached through inertial oscillations. The time to attain the steady state increases with increase in Hall parameter.

---

Hall-Effekte bei hydromagnetischer Strömung über eine impulsartig gestartete Platte

Zusammenfassung Für das Problem der Hall-Effekte bei der hydromagnetischen Strömung, durch den impulsartigen Start einer porösen, ebenen Platte, wurde eine exakte Lösung erhalten. Es wird beobachtet, daß im Anfangszustand keine Trägheitsschwingung auftritt, wogegen nach längerer Zeit der stationäre Zustand durch Trägheitsschwingungen erreicht wird. Die Zeit um den stationären Zustand zu erreichen, wächst mit dem Anwachsen der Hall-Parameter an.

---

---

With 2 Figures     

Coating with artificial matrices from collagen and sulfated hyaluronan influences the osseointegration of dental implants

Dental implants are an established therapy for oral rehabilitation. High success rates are achieved in healthy bone, however, these rates decrease in compromised host bone. Coating of dental implants with components of the extracellular matrix is a promising approach to enhance osseointegration in compromised peri-implant bone. Dental titanium implants were coated with an artificial extracellular matrix (aECM) consisting of collagen type I and either one of two regioselectively low sulfated hyaluronan (sHA) derivatives (coll/sHA1Δ6s and coll/sHA1) and compared to commercial pure titanium implants (control). After extraction of the premolar teeth, 36 implants were inserted into the maxilla of 6 miniature pigs (6 implants per maxilla). The healing periods were 4 and 8 weeks, respectively. After animal sacrifice, the samples were evaluated histomorphologically and histomorphometrically. All surface states led to a sufficient implant osseointegration after 4 and 8 weeks. Inflammatory or foreign body reactions could not be observed. After 4 weeks of healing, implants coated with coll/sHA1Δ6s showed the highest bone implant contact (BIC; coll/sHA1Δ6s: 45.4 %; coll/sHA1: 42.2 %; control: 42.3 %). After 8 weeks, a decrease of BIC could be observed for coll/sHA1Δ6s and controls (coll/sHA1Δ6s: 37.3 %; control: 31.7 %). For implants coated with coll/sHA1, the bone implant contact increased (coll/sHA1: 50.8 %). Statistically significant differences could not be observed. Within the limits of the current study, aECM coatings containing low sHA increase peri-implant bone formation around dental implants in maxillary bone compared to controls in the early healing period.     

Microstructural design of neodymium-doped lanthanum–magnesium hexaaluminate synthesized by aqueous sol–gel process

Aqueous sol–gel processing was used to synthesize neodymium-doped magnesium hexaaluminate (La_1?x Nd _x MgAl₁₁O₁₉; x = 0, 0.3, 0.4, 0.5) ceramic powder and subsequently calcined at 1450 and 1600 °C for 2 h. Randomly grown platelets of lanthanum–magnesium hexaaluminate formed a porous interlocking structure. Presence of various percentages of neodymium oxide significantly modifies the porous interlocking microstructure into self-reinforced, card-house-like microstructure. Platelets of rare earth-rich magnesium hexaaluminate were grown preferentially more than the stoichiometric rare earth magnesium hexaaluminate at elevated temperature greater than 1450 °C. Rare earth-rich magnesium hexaaluminate platelets form the skeleton of a card-house structure and the tiny platelets of stoichiometric rare earth magnesium hexaaluminate fill the house. The specific heat capacities, micro-hardness, and fracture toughness were studied in details.     

Compositional and Dimensional Control of 2D and Quasi‐2D Lead Halide Perovskites in Water

Blue light emitting two dimensional (2D) and quasi‐2D layered halide perovskites (LHPs) are gaining attention in solid‐state lighting applications but their fragile stability in humid condition is one of the most pressing issues for their practical applications. Though water is much greener and cost effective, organic solvents must be used during synthesis as well as the device fabrication process for these LHPs due to their water‐sensitivity/instability and consequently, water‐stable blue‐light emitting 2D and quasi‐2D LHPs have not been documented yet. Here, water‐mediated facile and cost‐effective syntheses, characterizations, and optical properties of 16 organic–inorganic hybrid compounds are reported including 2D (A′)₂PbX₄ (A′ = butylammonium, X = Cl/Br/I) (8 compounds), 3D perovskites (4), and quasi‐2D (A′)_pA_x?1B_xX_3x+1 LHPs (A = methylammonium) (4) in water. Here, both composition and dimension of LHPs are tuned in water, which has never been explored yet. Furthermore, the dual emissive nature is observed in quasi‐2D perovskites, where the intensity of two photoluminescence (PL) peaks are governed by 2D and 3D inorganic layers. The Pb(OH)₂‐coated 2D and quasi‐2D perovskites are highly stable in water even after several months. In addition, single particle imaging is performed to correlate structural–optical property of these LHPs.     

Community response to environmental noise and the impact on cardiovascular risk score

Objective

The objective of our study was to investigate and evaluate the relationship between road traffic noise and cardiovascular risk.

Methods

The study sample (n = 659; 36.9% male, 63.1% female university students, mean age 22.83 ± 1.58 years) included a group exposed to road traffic noise (n = 280, L_eq,24 h = 67 ± 2 dB(A)) and a control group (n = 379, L_eq,24 h = 58.7 ± 6 dB(A)). Subjective response was determined by a validated noise annoyance questionnaire. The ten year risk of developing a coronary heart disease event was quantified as an evaluation of cardiovascular risk (SCORE60, Framingham 10-year risk estimation and projection to the age of 60, relative risk SCORE chart).

Results

Cardiovascular risk scores were significantly higher in the exposed group based on the Framingham scores projected to the age of 60, SCORE60 (AOR = 2.72 (95% CI = 1.21-6.15)) and the relative risk SCORE chart (AOR = 2.81 (1.46-5.41)).

Conclusions

These findings highlight the association between road traffic noise and cardiovascular risk.     

Diagnostic performance of edited 2HG MR spectroscopy of central glioma in the clinical environment

Magnetic Resonance Materials in Physics, Biology and Medicine - Oncometabolite D-2-hydroxyglutarate (2HG) is pooled in isocitrate dehydrogenase (IDH)-mutant glioma cells. Detecting 2HG by MR...     

Design optimization of deep groove ball bearings using crowding distance particle swarm optimization

This paper presents a crowding distance particle swarm optimization technique to optimize the design parameters of deep groove ball bearings. The design optimization problem is multi-objective in nature. The considered objectives are maximizing dynamic and static load bearing capacities and minimizing elasto-hydrodynamic film thickness. The technique is applied to bearings used in transmission system of a tractor for the purpose of farming. Pareto optimal solutions are obtained using the proposed technique. The results obtained from the technique are found to be superior compared with NSGA-II and catalogue values.     

Decision Support for the Comparative Evaluation and Selection of Analytical Methods: Detection of Genetically Modified Organisms as an Example

The selection of the best-fit-for-purpose analytical method to be implemented in the laboratory is difficult due to availability of multiple methods, targets, aims of detection, and different kinds and sources of more or less reliable information. Several factors, such as method performance, practicability, cost of setup, and running costs need to be considered together with personnel training when selecting the most appropriate method. The aim of our work was to prepare a flexible multicriteria decision analysis model suitable for evaluation and comparison of analytical methods used for the purpose of detecting and/or quantifying genetically modified organisms, and to use this model to evaluate a variety of changing analytical methods. Our study included selection of PCR-, isothermal-, protein-, microarray-, and next-generation sequencing-based methods in simplex and/or multiplex formats. We show that the overall result of their fitness for purpose is relatively similar; however, individual criteria or a group of related criteria exposed more substantial differences between the methods. The proposed model of this decision support system enables easy modifications and is thus suitable for any other application of complex analytical methods.