Monolithic integration of DFB laser with spot-size transformer forhighly efficient laser fibre coupling

The monolithic integration of a mushroom type InGaAs-InGaAsP MQW DFB laser with a spot-size transformer based on a two-layer lateral taper is reported. Highly efficient coupling to a butt-joined dispersion shifted singlemode fibre with a coupling loss down to 0.9 dB and large alignment tolerances was achieved, maintaining the good spectral characteristics of an isolated DFB-laser structure     

Caudascopic experiences and a new patho-anatomic concept for treatment of sciatica

Osteotomy has been used in treatment of unstable intertrochanteric hip fractures in an attempt to increase the stability of the fracture fragments. We have assessed this stability in a randomised prospective study on 138 patients, all having been fixed by dynamic hip screen, comparing anatomical reduction with medialisation osteotomy. The groups were similar in terms of age, gender and fracture configuration. There was no difference in final results in both groups except that operation time was longer in osteotomy group and the blood loss was more. We found no clear benefit from osteotomy and therefore recommend anatomical reduction and fixation by a sliding hip screw in most cases. Rarely, a fracture configuration which does not allow anatomical reduction may benefit from an osteotomy.     

Is urine leukocyte esterase test a useful screening method to predict Chlamydia trachomatis infection in women?

We evaluated the use of the leukocyte esterase test (LET) on first-catch urine specimens from women as a screening test to predict infection with Chlamydia trachomatis. For diagnosis, we used Abbott's ligase chain reaction (LCR) on urine specimens and isolation by tissue culture (TC) on cervical brushes. Of 4,053 women attending sexually transmitted disease and family planning clinics, 4.3% (n = 174) were positive by TC and 5.9% (n = 239) were positive by LCR. When LET was compared to TC, the sensitivity, specificity, positive predictive value, and negative predictive value were 54.0, 67.0, 6.8, and 97.0%, respectively. The corresponding performance of LET versus LCR was 53.1, 67.3, 10.1, and 95.8%. Almost half of the laboratory-confirmed chlamydial infections were negative by LET. The low specificity probably reflects multiple causes of pyuria in women and results in a low positive predictive value. LET is neither sensitive nor specific as a predictor of chlamydial infection and cannot be recommended for use as a screening test for C. trachomatis with first-catch urine samples from females from low- or moderate-prevalence populations.     

New protection method for HVDC lines including cables

For the third project of the Hokkaido-Honshu HVDC Link in Japan, called the HVDC Link III project (rated at 250 kVDC-1200 A-300 MW), we developed an HVDC transmission line protection method based on a new working principle that allows high-speed and highly sensitive detection of faults, enhancing reliability in the supply of electric power. In general, increasing the sensitivity of relays will lead to an increased likelihood of undesired operation whereas lowering the sensitivity will impair the responsiveness of the relays. Our proposed method meets these apparently incompatible requirements very well. Basically classified as a differential scheme, the HVDC transmission line protection method compensates for a charging and discharging current that flows through the line-to-ground capacitance at times of voltage variations caused by a line fault or by the operation of DC power systems. The developed protection method is also characterized in that it uses current changes induced by voltage variations to restrain the operation of a relay. This configuration has made the proposed method far superior in responsiveness and sensitivity to the conventional protection method. A simulation using an EMTP (Electro-Magnetic Transients Program) was conducted on this method. Developed relay equipment embodying the new protection method was subjected to various verification tests, where this equipment was connected to a power system simulator, before being delivered to the HVDC Link III facility     

Crosslinking of tissue-derived biomaterials in 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)

In contrast to bifunctional reagents such as glutaraldehyde or polyfunctional reagents such as polyepoxides, carbodiimides belong to the class of zero-length crosslinkers which modify amino acid side-groups to permit crosslink formation, but do not remain as part of that linkage. The authors have compared the effects of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and glutaraldehyde (the de facto industrial standard crosslinker) on the hydrothermal, biochemical, and uniaxial mechanical properties of bovine pericardium. EDC crosslinking was optimized for maximum increase in collagen denaturation temperature using variables of pH, concentration, and ratio of EDC to N-hydroxysuccinimide (NHS): a reagent for formation of activated esters. EDC and glutaraldehyde crosslinked materials were subjected to hydrothermal denaturation tests, biochemical degradation by enzymes (collagenase, trypsin) and CNBr, amino acid analysis for unreacted lysine, and to high strain rate mechanical tests including: large deformation stress-strain studies (0.1 to 10 Hz), stress relaxation experiments (loading time 0.1 s) and small deformation forced vibration (1 and 10 Hz). A protocol for EDC crosslinking was developed which used 1.15% EDC (2:1 EDC:NHS) at pH 5.5 for 24 h. The increase in denaturation temperature for EDC (from 69.7±1.2°C to 86.0±0.3°C) was equivalent to that produced by glutaraldehyde (85.3±0.4°C). Both treatments equivalently increased resistance to collagenase and CNBr degradation; however, after denaturation, the EDC-treated tissue was slightly more resistant to collagenase, and markedly more resistant to trypsin. EDC-treated materials were more extensible and more elastic than glutaraldehyde-treated materials. Despite the differences in crosslinking mechanism, EDC and glutaraldehyde-treated materials are very similar. Subtle but intriguing differences in biochemical structure remain to be investigated.     

Beam test of the CsI(Tl) calorimeter for the BELLE detector at the KEK-B factory

We studied the performance of a prototype electromagnetic calorimeter for the BELLE detector at the KEK proton synchrotron for an energy range of 0.25–3.5 GeV. The prototype consisted of an array of 6 × 5 CsI(Tl) crystals with 30 cm length (16.2 radiation lengths) and about 6 cm × 6 cm cross section. The scintillation light of each CsI(Tl) crystal was read out by two large-area PIN photodiodes and charge-sensitive preamplifiers attached at the rear face of the crystal. We measured the energy and position resolution for electrons and the e/π separation for two sets of matrix configurations: one corresponded to the center and the other to the edge of the barrel calorimeter. The overall performance measured by the test proves that the prototype calorimeter is satisfactory for the use in the BELLE detector.     

A quantitative approach to modeling mammalian myelinated nervefibers for electrical prosthesis design

Presents an upgraded cable model of mammalian myelinated nerve fibers in an extracellularly applied field. The kinetics of the nodes is based upon voltage clamp data in rat motor fibers at 37°C (J.R. Schwartz and G. Eikhof, 1987), while the resting membrane potential is computed with the Goldman equation. The resulting spike shape, conduction velocity, strength/duration behavior, and absolute and relative refractory period are in good quantitative agreement with published experimental data in mammals at normal body temperature and at 20°C. Results at intermediate temperatures however, suggest that the widely used concept of a constant Q₁₀ for the rate constants is invalid. In addition, the model generates realistic abortive spikes towards the end of the absolute refractory period and it can describe the consequences of repetitive firing. The results stress the advantages of a multiple nonlinear node model even if only time aspects of nerve behavior are under study. It turned out, that the model presented here describes in vivo neural properties relevant for electrical prosthesis design better than previous models in literature