A Sub-Picosecond Resolution 0.5–1.5 GHz Digital-to-Phase Converter

A digital-to-phase converter (DPC) is an essential building block in applications such as source-synchronous interfaces and digital phase modulators. The resolution of DPCs using analog phase interpolators is severely affected by the operating frequency and rise times of the interpolator inputs. In this paper, we present a new DPC architecture that achieves high resolution independent of both the operating frequency and the rise time. The 8 phases generated by a phase-locked loop are dithered using a delta-sigma modulator to shape the truncation error to high frequency and is subsequently filtered using a delay-locked loop phase filter. The test chip, fabricated in a 0.13 mum CMOS process, operates from 0.5 -1.5 GHz and achieves a differential nonlinearity of less than plusmn0.1 ps and an integral nonlinearity of plusmn12 ps. The total power consumption while operating at 1 GHz is 15 mW.     

A 0.8-V accurately tuned linear continuous-time filter

An accurately tuned low-voltage linear continuous-time filter is presented in this paper. Accurate tuning is achieved using time-constant matched master-slave tuning combined with power-up mismatch calibration. A low-pass biquad designed for a corner frequency of 115 kHz achieves better than -80-dB total harmonic distortion with a 250-mV/sub pp/ 10-kHz input signal. The prototype implemented in 0.18-/spl mu/m CMOS process occupies an area of 0.4 mm/sup 2/ and dissipates 4.6 mW (2.6 mW for the filter and 2 mW for tuning) of power.     

Functionality of Dual‐Phase Lithium Storage in a Porous Carbon Host for Lithium‐Metal Anode

Lithium (Li) metal is regarded as the most attractive anode material for high‐energy Li batteries, but it faces unavoidable challenges—uncontrollable dendritic growth of Li and severe volume changes during Li plating and stripping. Herein, a porous carbon framework (PCF) derived from a metal–organic framework (MOF) is proposed as a dual‐phase Li storage material that enables efficient and reversible Li storage via lithiation and metallization processes. Li is electrochemically stored in the PCF upon charging to 0 V versus Li/Li⁺ (lithiation), making the PCF surface more lithiophilic, and then the formation of metallic Li phase can be induced spontaneously in the internal nanopores during further charging below 0 V versus Li/Li⁺ (metallization). Based on thermodynamic calculations and experimental studies, it is shown that atomically dispersed zinc plays an important role in facilitating Li plating and that the reversibility of Li storage is significantly improved by controlled nanostructural engineering of 3D porous nanoarchitectures to promote the uniform formation of Li. Moreover, the MOF‐derived PCF does not suffer from macroscopic volume changes during cycling. This work demonstrates that the nanostructural engineering of porous carbon structures combined with lithiophilic element coordination would be an effective approach for realizing high‐capacity, reversible Li‐metal anodes.     

Parallel correlated double sampling technique for pipelined analogue-to-digital converters

A new correlated double sampling technique that avoids the additional thermal noise penalty is presented. The new technique employs a low- gain two-stage opamp with the second stage made up of multiple gain stages in parallel. The superior noise performance of the proposed technique to correlated double sampling is shown.     

Synthesis and Characterization of 2D Molybdenum Carbide (MXene)

Large scale synthesis and delamination of 2D Mo₂CT _x (where T is a surface termination group) has been achieved by selectively etching gallium from the recently discovered nanolaminated, ternary transition metal carbide Mo₂Ga₂C. Different synthesis and delamination routes result in different flake morphologies. The resistivity of free‐standing Mo₂CT _x films increases by an order of magnitude as the temperature is reduced from 300 to 10 K, suggesting semiconductor‐like behavior of this MXene, in contrast to Ti₃C₂T _x which exhibits metallic behavior. At 10 K, the magnetoresistance is positive. Additionally, changes in electronic transport are observed upon annealing of the films. When 2 μm thick films are tested as electrodes in supercapacitors, capacitances as high as 700 F cm^?3 in a 1 m sulfuric acid electrolyte and high capacity retention for at least 10,000 cycles at 10 A g^?1 are obtained. Free‐standing Mo₂CT _x films, with ≈8 wt% carbon nanotubes, perform well when tested as an electrode material for Li‐ions, especially at high rates. At 20 and 131 C cycling rates, stable reversible capacities of 250 and 76 mAh g^?1, respectively, are achieved for over 1000 cycles.     

High performance sustaining driver for plasma display panel employing gas-discharge current compensation method

A new sustaining driver for a plasma display panel (PDP) employing a gas-discharge current compensation method is proposed. It features a high performance, zero-voltage-switching, high efficiency, low EMI and high energy-recovery capability. Furthermore, since it compensates for the large gas-discharge current, it enables the PDP to light at a lower voltage than the prior circuit.     

Thermally controlled wavelength locker integrated in widely tunable SGDBR-LD module

A sampled-grating distributed Bragg reflector laser module having an integrated multiwavelength locker has been developed and evaluated. The uniquely designed wavelength locker made of thermally controlled etalon has provided uniform wavelength monitoring and very stable wavelength locking in the 188-ITU grid channels (37 nm) with 25-GHz spacing. Over the case temperature from -5/spl deg/C to 65/spl deg/C, the laser wavelength was locked within /spl plusmn/0.5 GHz, and the total power consumption of the module was less than 4 W.     

Fault Attack on a Point Blinding Countermeasure of Pairing Algorithms

Recently, Page and Vercauteren proposed a fault attack on pairing algorithms and two countermeasures against such an attack. The countermeasure uses either a random scalar or a random point to blind the input points. To defeat the countermeasure using a random point, we utilize the point addition formula on an elliptic curve. As a result, we successfully defeat the countermeasure using a random point.