Fabrication of Ni-shims using UV-moulding as an intermediate step

We fabricated nickel-shims including various types of structures with dimensions from hundreds of nanometers to several microns. The mastering process was made by electron-beam lithography, lift-off and reactive ion etching techniques. Then the structures were copied into a UV-curable ORMOCER-material and the Ni-shims were fabricated by electroforming using UV-copies as masters. The experiments showed that the use of UV-copying evades typical quartz master sticking and cracking problems. Furthermore, all features were replicated in the final Ni-shim as they existed in the quartz master proving the method suitable for the fabrication of the Ni-shims from the quartz masters with high precision.     

Handover and Uplink Power Control Performance in the 3.84 Mcps TDD mode of UTRA Network

In this article we consider the performance of the 3.84 Mcpstime-division duplex (TDD) mode of UTRA (Universal TerrestrialRadio Access) network. We emphasize two of the radio resourcemanagement algorithms, handover and uplink power control, whoserole in the overall system performance is studied extensively.First, a handover algorithm used in WCDMA (Wideband Code DivisionMultiple Access) standard is considered in a TDD-mode operation.This gives rise to a careful setting of different handoverparameters, and the evaluation of the effects to the systemperformance. Secondly, the specified uplink power controlalgorithm is considered. Since it is based on several user-mademeasurements which may involve both random and systematic errors acareful study about the suitability of the power control scheme iscarried out.     

Nanoparticle-Aided Detection of Colorectal Cancer-Associated Glycoconjugates of Extracellular Vesicles in Human Serum

Extracellular vesicles (EVs) are found in all biological fluids, providing potential for the identification of disease biomarkers such as colorectal cancer (CRC). EVs are heavily glycosylated with specific glycoconjugates such as tetraspanins, integrins, and mucins, reflecting the characteristics of the original cell offering valuable targets for detection of CRC. We report here on europium-nanoparticle (EuNP)-based assay to detect and characterize different surface glycoconjugates of EVs without extensive purification steps from five different CRC and the HEK 293 cell lines. The promising EVs candidates from cell culture were clinically evaluated on small panel of serum samples including early-stage (n = 11) and late-stage (n = 11) CRC patients, benign condition (n = 11), and healthy control (n = 10). The majority of CRC cell lines expressed tetraspanin sub-population and glycovariants of integrins and conventional tumor markers. The subpopulation of CD151 having CD63 expression (CD151^CD63) was significantly (p = 0.001) elevated in early-stage CRC (8 out of 11) without detecting any benign and late-stage samples, while conventional CEA detected mostly late-stage CRC (p = 0.045) and with only four early-stage cases. The other glycovariant assays such as CEA^Con-A, CA125^WGA, CA 19.9^Ma696, and CA 19.9^Con-A further provided some complementation to the CD151^CD63 assay. These results indicate the potential application of CD151^CD63 assay for early detection of CRC patients in human serum.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Speed‐up and performance evaluation of piecewise‐linear DC analysis

The good convergence properties of piecewise‐linear (PWL) DC analysis have been thoroughly discussed in many papers. This paper, in turn, concentrates on the speed of PWL DC analysis, where the boundary crossing of linear regions plays a crucial role. Fast methods are presented for performing the following boundary‐crossing computations: LU‐decomposition update, matrix‐equation solution, boundary‐crossing direction, and damping‐factor determination. Special attention is given to those PWL DC analysis methods that perform PWL modelling of the non‐linear components on the fly; an adaptive method is proposed for controlling the accuracy of PWL modelling and speeding up simulation. The computational efficiency of the accelerated PWL DC analysis is discussed and compared with that of conventional, Newton–Raphson iteration‐based, DC analysis. Finally, the performance evaluation is completed with realistic simulation examples: it is demonstrated that the speed of the accelerated PWL DC analysis is comparable with that of the conventional DC analysis. Copyright © 2006 John Wiley & Sons, Ltd.     

Numerical study of near-field writing on a phase-change optical disk

Absorption in the phase-change layer of an optical disk located in the near field of a Fabry-Perot laser diode is studied with a combination of finite-difference time domain (FDTD) analysis and a phenomenological laser model that predicts the operational characteristics of a laser diode. Some numerical simulations are performed and results are presented. In addition, the combined FDTD/laser-simulation model is described briefly.     

Impact and visibility of Norwegian,Finnish and Spanish journals in the fields of humanities

Scientometrics - This article analyses the impact and visibility of scholarly journals in the humanities that are publishing in the national languages in Finland, Norway and Spain. Three types of...     

Oral findings in patients with active or inactive Crohn''s disease

The frequency and type of oral mucosal lesions, dental infections, and salivary constituents were evaluated in 53 patients with Crohn's disease, who were divided into inactive, mildly active, and severely active groups on the basis of clinical and endoscopic criteria. Buccal biopsies from nine patients with active disease showed morphologic changes that suggested Crohn's disease-related lesions. Panoramic radiographs revealed more infectious foci in the teeth of patients with active Crohn's disease than in patients with inactive disease. Salivary flow rate, buffering capacity, total protein, amylase, and IgA and IgG concentrations did not differ with respect to the activity of Crohn's disease. The observed mucosal inflammation in patients with active Crohn's disease, although high in frequency, was mild and did not need therapy, but the great number of dental infections in association with the activity of Crohn's disease should be taken into account in the treatment of these patients.     

Strength retention of drawn self-reinforced polyglycolide rods and fixation properties of the distal femoral osteotomies with these rods. An experimental study on rats

Drawn self-reinforced polyglycolide (SR-PGA) rods, Ø 2 mm and 26 mm long, were implanted in the dorsal subcutaneus tissue of 16 rats. Osteotomies of the distal femur were fixed with SR-PGA rods (2 mm by 15 mm) in another 38 rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of osteotomized and intact control femora were also performed. At three weeks the flexural strength of the rods was 50% of the initial value, and the flexural modulus was 46% of the initial value. Five osteotomy specimens had to be excluded due to dislocation or non-union. One of the 33 evaluated osteotomy specimens showed signs of postoperative infection. Thirty-two osteotomies healed uneventfully. No gross signs of inflammatory or foreign-body reaction were observed. The amount of osteoid surface and active osteoid formation surface reached their highest value in the histomorphometrical analysis at 24 weeks. The present investigation demonstrated that the mechanical strength and fixation properties of the drawn SR-PGA rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on the successful application of drawn SR-PGA rods for fixation of cancellous bone osteotomies.