An Optimum Retransmission Cut-Off Scheme for Slotted ALOHA

The retransmission cut-off is not needed for a stable operation of slottedALOHA if the new packet generation rate is below a critical limit. Thethroughput never reaches its maximum value if the new packet generation rateis less than this critical limit irrespective of the number of transmissions.The maximum throughput is attained by adjusting the number of transmissions,pertaining to the new packet generation rate exceeding the critical limit.A complete analysis for the new packet generation rate with the properadjustment of the number of transmissions that maximize the channel throughputin a Rayleigh fading channel is executed. A stable operating region in termsof the packet rejection probability and the corresponding number oftransmissions is devised.     

Spatial filtering for robust myoelectric control

Pattern recognition techniques have been applied to extract information from electromyographic (EMG) signals that can be used to control electrical powered hand prostheses. In this paper, optimized spatial filters that enhance separation properties of EMG signals are investigated. In particular, different multiclass extensions of the common spatial patterns algorithm are applied to high-density surface EMG signals acquired from the forearms of ten healthy subjects. Visualization of the obtained filter coefficients provides insight into the physiology of the muscles related to the performed contractions. The CSP methods are compared with a commonly used pattern recognition approach in a six-class classification task. Cross-validation results show a significant improvement in performance and a higher robustness against noise than commonly used pattern recognition methods.     

Novel detector implementations for 3G LTE downlink and uplink

We summarize our recent state-of-the-art programmable and reconfigurable detector and QR decomposition (QRD) implementations targeting 3G long term evolution (LTE) downlink and uplink requirements. The downlink transmission is based on the orthogonal frequency division multiplexing, whereas the uplink transmission uses a single-carrier frequency-division multiple access. The downlink implementations are based on the programmable transport triggered architecture (TTA) which provides a flexible and energy efficient architecture template. In TTA detector implementation, the LTE detection rate requirements up to 20 MHz bandwidth and 4 × 4 antenna system with 64-QAM, are achieved by using 1–6 programmable cores in parallel. Each core runs at 277 MHz clock frequency and consumes 55.5–64.0 mW depending on the detector configuration. The downlink detector is based on the selective spanning with fast enumeration algorithm. The uplink field-programmable gate array (FPGA) detector implementation is targeted for 4 × 4 antenna system and 64-QAM achieving a detection rate requirement for 20 MHz bandwidth. The used FPGA board for uplink implementation is Xilinx Virtex-6 and the implementation has been carried out using Xilinx Vivado high level synthesis tool. Two different detector architectures are implemented. The first one achieves the detection rate requirement with a single processing block running at 231 MHz and the latter one with four blocks in parallel, each running at 247 MHz. The implemented detector is based on the K-best algorithm. A multiple-input multiple-output receiver requires QRD to produce valid inputs for the detector. In addition to detector implementations, QRD is also implemented on both TTA and FPGA. Modified Gram–Schmidt algorithm is used in both QRD implementations.     

Raw and processed fish show identical Listeria monocytogenes genotypes with pulsed-field gel electrophoresis

A total of 257 raw fish samples at two different sites were examined for the presence of Listeria monocytogenes. The prevalence of L. monocytogenes was 4%. From 11 positive samples, nine different L. monocytogenes pulsed-field gel electrophoresis genotypes were recovered. From nine pulsotypes recovered from raw fish and 32 pulsotypes shown by 101 fish product isolates, two raw fish and fish product pulsotypes were indistinguishable from each other. Although the prevalence of L. monocytogenes in raw fish is low, the range of L. monocytogenes strains entering the processing plant in large amounts of raw material is wide. This indicates that the raw material is an important initial contamination source of L. monocytogenes in fish processing plants. This postulation is supported by the identical pulsotypes recovered from both raw and processed fish. Some L. monocytogenes strains entering a plant may thus contaminate and persist in the processing environment, causing recurrent contamination of the final products via processing machines.     

Prevalence and genetic diversity of Listeria monocytogenes in the tonsils of pigs

This study was set up to establish the prevalence of Listeria monocytogenes in the tonsils of sows and fattening pigs from five Finnish slaughterhouses and to evaluate the genetic similarity of L. monocytogenes strains isolated from the tonsils. A total of 271 pig tonsils (132 tonsils from fattening pigs and 139 from sows) from five different slaughterhouses in various parts of Finland were studied from June 1999 to March 2000. Overall, 14 and 4% of pig tonsils harbored L. monocytogenes and Listeria innocua, respectively. The prevalence of L. monocytogenes in tonsils of fattening pigs (22%) was significantly higher than in sows (6%). The isolates (n = 38) recovered from tonsils showed a wide genetic diversity by means of 24 different pulsed-field gel electrophoresis (PFGE) types presented by the strains. Moreover, in numerical analyses of restriction patterns, no association was found between the clustering of strains and the slaughterhouses, and strains showing a similar PFGE type were recovered from pigs of different slaughterhouses. The high prevalence of L. monocytogenes showing various PFGE types in the tonsils of pigs could indicate a potential source of contamination of pluck sets, carcasses, and the slaughterhouse environment and of subsequent processing steps.     

Multimedia Broadcast Multicast Service Performance and its Enhancements in WCDMA Networks

Multimedia Broadcast Multicast Service (MBMS) in Wideband Code Division Multiple Access (WCDMA) networks is used to transmit information from one source to vast amount of recipients. The MBMS technique eases the load of the network and therefore allows network to serve more subscribers. The very aim of this study is to evaluate the performance of Release 6 MBMS and its performance enhancements in WCDMA networks. Special attention will be focused on macro and receive diversity which are considered in addition to time diversity provided by long interleaving as enhancements on MBMS performance. 3GPP Release 6 specifications for MBMS introduce two macro diversity schemes: soft and selective combining. The effect of those combining scheme concepts together with and without receive diversity provided by multiple receive antennas are examined. Also, a concept closely related to the receive diversity called Rx-switching i.e., turning the another receive antenna off in good channel situations for power saving purposes is studied. The system level performance of MBMS point-to-multipoint (p-t-m) mode is evaluated with dynamic system level tool in which e.g., mobility of users and interactions of the radio resource management functionalities are explicitly taken into account. Our studies indicate that macro diversity brings significant gains to the MBMS performance. Receive diversity together with macro diversity schemes improves the performance even more and therefore enhances the cell throughput that MBMS can offer. Furthermore, based on the findings of this study it seems that 2Rx Rake receiver can operate with a single antenna significant amount of time without sacrificing desired coverage and thus provide clear power saving opportunities.

Aerosol analysis of residual and nanoparticle fractions from spray pyrolysis of poorly volatile precursors

The quality of aerosol‐produced nanopowders can be impaired by micron‐sized particles formed due to non‐uniform process conditions. Methods to evaluate the quality reliably and fast, preferably on‐line, are important at industrial scales. Here, aerosol analysis methods are used to determine the fractions of nanoparticles and micron‐sized residuals from poorly volatile precursors. This is accomplished using aerosol instruments to measure the number and mass size distributions of Liquid Flame Spray‐generated alumina and silver particles produced from metal nitrates dissolved in ethanol and 2‐ethylhexanoic acid (EHA). The addition of EHA had no effect on silver, whereas, 5% EHA concentration was enough to shift the alumina mass from the residuals to nanoparticles. The size‐resolved aerosol analysis proved to be an effective method for determining the product quality. Moreover, the used on‐line techniques alone can be used to evaluate the process output when producing nanopowders, reducing the need for tedious off‐line analyses. © 2016 American Institute of Chemical Engineers AIChE J, 63: 881–892, 2017