Sixth graders’ evaluation strategies when reading Internet search results: an eye-tracking study

Eye-tracking technology was used to examine Internet search result evaluation strategies adopted by sixth-grade students (N?=?36) during ten experimental information search tasks. The relevancy of the search result’s title, URL, and snippet components was manipulated and selection of search results as well as looking into probabilities on the search result components was analysed. The results revealed that during first-pass inspection, students read the search engine page by first looking at the title of a search result. If the title was relevant, the probability of looking at the snippet of the search result increased. During second-pass inspection, there was a high probability of students focusing on the most promising search result by inspecting all of its components before making their selection. A cluster analysis revealed three viewing strategies: half of the students looked mainly at the titles and snippets; one-third with high probability examined all components; and one-sixth mainly focused on titles, leading to more frequent errors in search result selection. The results indicate that students generally made a flexible use of both eliminative and confirmatory evaluation strategies when reading Internet search results, while some seemed to not pay attention to snippet and URL components of the search results.     

BOAR: an advanced HW/SW coemulation environment for DSP system development

The BOAR emulation system is targeted to hardware/software (HW/SW) codevelopment of advanced embedded DSP and telecom systems. The challenge of the BOAR system is efficient customization of programmable hardware, and dedicated partitioning routine to target applications and structures, which allows quite high overall system performance. The system allows multiple configurations for communication between processors and field programmable gate arrays (FPGAs) making the BOAR system an efficient tool for real-time HW/SW coverification. The reprogrammable hardware of the emulation tool is based on four Xilinx 4000-series devices, two Texas TMS320C50 signal processors and one Motorola MC68302 microcontroller. With current devices the BOAR hardware provides approximately 40–70 kgates of logic capacity in DSP applications. The emulation capacity can be expanded by connecting several similar boards in chain. The system has also a versatile internal reprogrammable test environment for test bench development, performance evaluations and design debugging. The logic development environment is based on the Synopsys synthesis tools and an automatic design management software, which performs resource mapping and performance-driven design partitioning between FPGAs. The emulation hardware is currently connected to logic and software development environments via an RS-232C bus. The BOAR emulation system has been found a very efficient platform for real-life prototyping of different types of DSP algorithms and systems, and validating correct functionality of a VHDL macro library.     

The effects of operating conditions on emissions from masonry heaters and sauna stoves

Emissions from masonry heaters and sauna stoves were studied. In the sauna stove the production of organic gaseous carbon (OGC) at 10 gC kg^?1 (per kilogram of fuel), carbon monoxide (CO) at 55 g kg^?1, fine particle mass (PM₁) at 5 g kg^?1 and number emissions (N) at 1.8 × 10¹⁵ kg^?1 was higher than in other measured appliances. In a modern technology masonry heater with a unique grate, the emissions were very low: 0.4 gC kg^?1 OGC, 14 g kg^?1 CO and 0.7 g kg^?1 PM₁. Conventional masonry heaters, using small logs, clearly produced higher emissions when compared to using large logs. Doubling the fuel load caused emission factors to increase by up to 4- times (OGC), except for the number emission, which decreased from 4.0 × 10¹⁴ to 2.0 × 10¹⁴ kg^?1. From the conventional masonry heater 90% of the PM was emitted during the firing phase. Its combustion process is different to that in stoves or conventional open fireplaces. The insufficient supply of air, due to too fast pyrolysis, and increased ash release, due to the high combustion temperature, are the main parameters which cause high particle and gas emissions in masonry heaters and sauna stoves.     

Polyphenol and vitamin C contents in European commercial blackcurrant juice products

Vitamin C and polyphenol contents (anthocyanins, proanthocyanidins, phenolic acids and flavonols) were analysed in commercial blackcurrant juice products purchased from various European countries (Finland, Poland, Germany, United Kingdom) using HPLC methods. The aim was to study variation between countries, as well as evaluate the intake of polyphenols from commercial juices. There was significant variation in the contents of polyphenols and vitamin C between countries. Expressed as the ready-to-drink beverages, German, Polish, Finnish and British products averaged anthocyanin contents of 38, 32, 12 and 7.5 mg/2.5 dl, proanthocyanidin contents of 27, 24, 10 and 1.2 mg/2.5 dl, flavonol contents of 16, 15, 5.2 & 1.9 mg/2.5 dl and phenolic acid contents of 12, 8.9, 3.7 and 1.5 mg/2.5 dl, respectively. The mean vitamin C content was highest in British (70 mg/2.5 dl) and lowest in Finnish products (15 mg/2.5 dl). The intake of polyphenols from German and Polish ready-to-drink beverages was clearly higher than that from Finnish, and especially, British beverages.     

Optical scattering of nanocrystalline Pb(ZrxTi1−x)O3 films

Optical characterization methods, like spectrophotometry at UV–vis-NIR wavelengths and prism-coupler method, were applied to polycrystalline Pb(Zr_xTi_1?x)O₃ thin films at various thicknesses. Thin films were deposited at room temperature by pulsed laser deposition on MgO (1 0 0) substrates and post-annealed at different temperatures. X-ray diffraction and atomic force microscopy were used to characterize the crystal structure and surface morphology of the thin films, respectively.Well oscillating transmission with a sharp fall near the absorption edge was found in films with high orientation and low surface roughness. Changes in the surface morphology and crystal orientation were found to modulate optical interference maxima and minima of the transmittance spectra and to increase the width of the TE₀ mode (Δβ ≈ 0.06) indicating an increase in the scattering losses of the films. Single-phase oriented films had sharpest coupling values (Δβ ≈ 0.005) of the TE₀ mode.     

Fluorescence quenching-based assays for hydrolyzing enzymes. Application of time-resolved fluorometry in assays for caspase, helicase, and phosphatase

We have developed assay technologies to measure hydrolyzing enzymes based on homogeneous time-resolved fluorescence quenching (TruPoint). High sensitivity was obtained using fluorescent europium chelates as labels, internally quenched by suitable quenchers and released upon enzymatic reaction. This approach allows robust and sensitive monitoring of low enzyme activities. The assay technology and the choice of donor-acceptor pairs were evaluated in three different enzymatic assays, a protease related to apoptosis, helicase involved in DNA unwinding, and phosphatase having an important role in cellular signaling cascades. All the assays produced an increasing signal, were sensitive, and had a good dynamic range. There were significant differences in optimized quenchers for each of the assays depending on the size, flexibility, and rigidity of the substrates. Also, clear differences in the energy-transfer reactions, their requirements for spectral overlapping, ionic interactions, and energy-transfer distances were found. Each of the enzymatic assays was briefly tested in a high-throughput screening environment by analyzing signal dynamics and statistical relevance as Z' factors.     

Tissue reactions of subcutaneously implanted mixture of ε-caprolactone-lactide copolymer and tricalcium phosphate. An electron microscopic evaluation in sheep

Biodegradable polymers, mainly derivates of -hydroxy acids, are widely used today in oral- and maxillofacial surgery, orthopedics, and other fields of surgery. These biomaterials are well tolerated by living tissue and fracture fixation devices made of polylactic or polyglycolic acid are clinically widely used today. Still, there are some problems in application of biodegradable polymers. Abacterial inflammatory reactions have been noticed after the clinical introduction of these devices. Both swelling and pain at the site of implantation have also been reported. The etiology of this inflammatory reaction is still unknown, despite the numerous studies. Therefore, the aim of the present study was to further characterize this inflammatory reaction in detail, by electronmicroscopy. We prepared a mixture of -caprolactone–lactide copolymer and tricalcium phosphate and placed it in the dermis in 12 sheep. Follow-up times were 9, 14, 24, and 52 weeks. We found that the mixture caused a mild inflammatory reaction. There were no signs of cell damage. Fibroblasts, macrophages, and eosinophils were found adjacent to the copolymer. The mixture is easy to handle and can be moulded into different shapes in room temperature. The results encourage us to continue our studies to develop a filling material for bone defects.     

A study on the resolution of a terahertz spectrometer for the assessment of the porosity of pharmaceutical tablets

In this study, the resolution of a time-domain terahertz spectrometer for tablet porosity measurements was estimated using two sets of pharmaceutical tablets. One set consisted of tablets with constant thickness and with porosity as a variable. The other set consisted of tablets with variable thickness and only a relatively small change in porosity. The set with constant thickness was used for the calibration of the terahertz (THz) spectrometer for the porosity measurements, and the resolution of the terahertz spectrometer was estimated using the set with different thicknesses and slightly different porosities. It was shown that a time-domain THz spectrometer is a sensitive device that allows monitoring of minute changes in the porosity of pharmaceutical tablets by detecting the time delay of the THz pulse, which is attributable to different refractive indices within the tablet.