Solar collectors for the Beirut climate

The performance of solar collector systems is optimized for the Beirut climate with respect to the following parameters: angle of tilt and orientation, plate emissivity and number of glass covers. The Beirut hourly ambient temperature, wind speed, wind direction and the monthly averaged hourly and daily global, beam and diffuse radiation are used in the calculation of the useful harnessed energy, collector's efficiency, storage-tank temperature and other relevant parameters.

The optimal thermal performance of the solar collector in Beirut is obtained for a south-facing collector all the year with a slope angle equal to latitude +15° in winter and latitude −15° in the summer. The use of a selective surface of low emissivity in the collector gives a higher useful energy gain of about 25% in summer and 10% in winter as compared with a nonselective plate surface. The collector's daily efficiency, under optimal conditions, varies from 55 to 65% depending upon the month of the year.     

CO2 laser light scattering by bare soils for emissivitymeasurements: absolute calibration and correlation with backscatteringand composition

Measurements of the scattering cross section of a number of bare soils have been made with CO₂ laser illumination at 10.59 μm. The primary focus was on absolute calibration of the measurements. First, comparison of emissivity values resulting from the application of Kirchhoff's relation after angular integration of the bidirectional measurements, with emissivity values obtained from the analysis of the emitted radiation show excellent agreement to within less than 0.3%. Second, it was found that a simple formula holds for a relationship between the emissivity and co- and cross-polarized backscattering cross section at an angle of 30°. Third, a clear correlation was observed between emissivity and composition (in this case % Al+Fe oxides; % SiO₂) for a homogeneous series of samples from the same area in Niger. These results emphasize the importance of calibrated experimental data. The implications of the research give evidence of the advantage of obtaining emissivity from remote reflectivity measurements and possibly only backscattering measurements, and remotely estimating mineral composition     

Temperature and modulation characteristics of resonant-cavitylight-emitting diodes

Resonant-cavity light-emitting diodes (RCLED) are novel, high-efficiency light-emitting diodes which employ optical microcavities. These diodes have higher intensities and higher spectral purity as compared to conventional LEDs. Analytical formulas are derived for the enhancement of the spontaneous emission along the optical axis of the cavity. The design rules for high-efficiency operation of RCLEDs are established. The temperature dependence of the emission intensity is analyzed in the range 20-80° and it is described by an exponential dependence with a characteristic temperature of 112 K. The modulation characteristics of RCLEDs exhibit 3 dB frequencies of 580 MHz. Eye diagrams at transmission rates of 622 Mb/s are wide open indicating the suitability of RCLEDs for high-speed data transmission     

Laser ablation of diamond fibres and a diamond fibre metal matrix composite

Continuous chemical vapour-deposited diamond-coated fibres with tungsten wire or SiC fibre cores are attractive for reinforcing metals and ceramics. The fibres have been embedded in Ti-6A1-4V alloy to produce a diamond fibre-reinforced composite. Both the fibres and the composite material are extremely difficult to cut without damage by conventional mechanical methods. The use of a Nd-YAG laser to cut these materials is described.     

Composite ZrO2 fibre-based materials with double ammonium-cobalt and ammonium-magnesium diphosphates

The mechanism of solid-state interface interaction in systems of pure and stabilized zirconia fibres with ammonium-magnesium and ammonium-cobalt diphosphates has been studied. The investigation conducted makes it possible to control the preparation process of the composites. The optimal composition of dry slip was found to be 70 wt% of fibre and 30 wt% binder. The properties of the developed composite materials are presented.     

A.c. conductivity studies on the silver molybdo-arsenate glassy system

A new quaternary fast-ion conducting silver molybdo-arsenate [Agl-Ag₂O-(MoO₃ + As₂O₅)] (SMA) glassy system has been prepared using the melt-quenching technique for various dopant salt (Agl) concentrations by fixing the formers (MoO₃ + As₂O₅) composition and the modifier (Ag₂O) to formers (M/F) ratio. The prepared compounds were characterized by X-ray diffraction. The impedance measurements were made on different Agl compositions of the SMA glasses as a function of frequency (6.5 Hz–65 kHz) and temperature (303–343 K), using the Solatron frequency-response analyser (model 1250). The bulk conductivity and the appropriate physical model (equivalent circuit) of the SMA glass were obtained from the impedance analysis. The a.c. conductivity was calculated for different Agl compositions of SMA glasses at various temperatures and the obtained a.c. conductivity results were analysed using Jonscher's Universal Law. The conduction mechanism for the highest conducting SMA glassy compound has been explained using the diffusion path model.     

Dynamic stress intensity factors analysis of interface crack using line-spring model

In this study, a new method for calculating the dynamic stress intensity factors of a bimaterial bending specimen with an interface crack is proposed by making use of a line-spring model. A pre-cracked bending specimen is modeled by one-dimensional beam finite elements and a line-spring representing the stiffness or compliance of a cracked part. The proposed method enables the one-dimensional analysis of a two-dimensional crack problem; thus the time variations of the dynamic stress intensity factors of a bimaterial bending specimen with an interface crack can be obtained by making use of a personal computer within a few minutes. The results obtained by the proposed method agree reasonably well with those obtained by the two-dimensional finite element method, although a slight difference in period can be found. The proposed method enables rapid evaluation of dynamic stress intensity factors. So a rapid evaluation system of the dynamic fracture toughness of a bimaterial with an interface crack can be achieved by combining an instrumented impact test apparatus with a computer program based on the proposed method which runs on a personal computer.     

Manual digital instruments for monitoring gear wheels

A justification is given for the conversion of pointer-reading manual gear measuring instruments to digital ones. The BV-5126 digital gear tooth micrometer and BV-5126 pitch gauge, both developed at NII-izmerieniya, are described. These instruments, while retaining the advantages of mechanical manual instruments, are more convenient in use, and have smaller errors. Computer software is also described which considerably widens the functional possibilities of the manual instruments. Translated from Izmeritel'naya Tekhnika, No. 6, pp. 31–33, June, 1996.     

Helicobacter pylori gastric infections in children

OBJECTIVES: Numerous reports have established the association of Helicobacter pylori and recurrent abdominal pain in children. We investigated the clinical, bacteriological and therapeutic features of our patients seen over a 1 year period. METHODS: We investigated 121 children during 1992 in Hospital Saint Vincent-de-Paul, Paris. At endoscopy, biopsies were taken and sent for histology and bacteriology and urease testing. A decision regarding treatment by amoxicillin and metronidazol was made after positive results of bacteriology and/or histology. RESULTS: Heliobacter pylori was found in 47 antral biopsies after pathology examination with Giemsa staining alone 16 times, bacterial culture 9 times and both methods 22 times. Abdominal pain was the prominent symptom, occurring in 35.5% of Helicobacter pylori+patients. In 25 of the positive negative patients, a nodular gastritis was observed (53.1%) and in 27.6% of them a weight loss or a delay in weight gain. Few patients became after combined treatment with amoxicillin and metronidazol whereas eradication rates after triple therapy with amoxicillin-metronidazol and H2 antagonist or proton pump blocker were higher. CONCLUSION: Helicobacter pylori related gastritis is a common cause of abdominal complaints in children. The most common symptom is recurrent abdominal pain. Antral nodularity is a peculiar endoscopic finding in children. Two-drug therapy associating amoxicillin-metronidazol is often ineffective to eradicate the bacteria whereas eradication rates after triple therapy amoxicillin-metronidazol and H2 antagonist or proton pump blocker are higher.     

Mode of the autocrine/paracrine mechanism of growth hormone action

GH is synthesized at multiple extrapituitary sites suggestive of an autocrine/paracrine mechanism of action. We have investigated a possible autocrine/paracrine mechanism of GH action, compared the cellular response to exogenous versus endogenously produced GH, and determined the nature of the interaction between external stimuli and endogenously produced GH. BRL cells expressing the GH receptor were transiently transfected with expression plasmids containing either the hGH or the bGH gene and the response of the cell was measured by CAT reporter plasmids requiring either STATs 1 and 3 or STAT5 for their response. Transient transfection of the hGH gene resulted in hGH accumulation in the cell and secretion into the media. The functional response through STATs 1 and 3 and STAT5 obtained with endogenously produced hGH was comparable or greater in magnitude to that obtained with the maximal stimulatory dose of exogenous hGH. Similar results were obtained with an expression plasmid containing the bGH gene. Endogenously produced hGH interacted in an additive manner when combined with submaximal doses of both exogenous hGH and serum. Such results were also observed in a more physiologically relevant mammary carcinoma cell line (MCF-7). The nonreceptor-dimerizing hGH antagonist, hGH-G120R, used in cells expressing the homologous receptor extracellular domain was able to only partially inhibit the response of the cell to endogenously produced hGH, in contrast to full inhibition of exogenous hGH. We therefore conclude that GH can function in an autocrine/paracrine manner, additive in effect to external stimuli.