Hydrocarbon condensation modelling to mitigate fluid coker cyclone fouling

FLUID COKING is a continuous process that thermally converts heavy hydrocarbons, such as oil sands bitumen, to lighter and higher‐value products by horizontal spray injection onto a fluidized bed of hot coke particles. The cyclone sections of commercial fluid coker reactors experience fouling during typical operation, which limits unit run lengths. The main objective of this work is to improve fluid coker reliability by proposing cyclone fouling mitigation strategies based on practical operation modifications. This study developed a process simulation in Aspen Plus to establish the combined impact of vapour‐liquid equilibrium, endothermic thermal cracking reactions, pressure changes, and overall fluid dynamics in the selected fluid coker control volumes. The hydrocarbon composition was defined by applying an assay characterization of distillation data for representative hydrocarbon streams. Case studies were performed to determine the sensitivity of the predicted temperatures and hydrocarbon condensate flow rates for: (a) the burner‐to‐fluid coker transfer line temperature; (b) the hot coke flow rate; (c) hot coke entrainment from the freeboard region; and (d) scouring coke flow rate in the horn chamber. The scouring coke flow rate was identified as the most promising process lever to mitigate fluid coker cyclone fouling.     

Microstructure and tensile properties of squeeze cast magnesium alloy AM50

High-pressure die cast magnesium alloy AM50 is currently used extensively in large and complex shaped thin-wall automotive components. For further expansion of the alloy usage in automobiles, novelmanufacturing processes need to be developed. In this study, squeeze casting of AM50 alloy with a relatively thick cross section was carried out using a hydraulic press with an applied pressure of 70 MPa. Microstructure and mechanical properties of the squeeze cast AM50 with a cross-section thickness of 10 mm were characterized in comparison with the die cast counterpart. The squeeze cast AM50 alloy exhibits virtually no porosity in the microstructure as evaluated by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength and elongation, for the squeeze cast samples over the conventional high-pressure die cast parts. The analysis of tensile behavior show that the strain-hardening rate during the plastic deformation of the squeeze cast specimens is constantly higher than that of the die cast specimens. The scanning electron microscopy fractography evidently reveals the ductile fracture features of the squeeze cast alloy AM50.     

Empirical evaluation of computational fear contagion models in crowd dispersions

In social psychology, emotional contagion describes the widely observed phenomenon of one person’s emotions being influenced by surrounding people’s emotions. While the overall effect is agreed upon, the underlying mechanism of the spread of emotions has seen little quantification and application to computational agents despite extensive evidence of its impacts in everyday life. In this paper, we examine computational models of emotional contagion by implementing two models (Bosse et al., European council on modeling and simulation, pp. 212–218, 2009) and Durupinar, From audiences to mobs: Crowd simulation with psychological factors, PhD dissertation, Bilkent University, 2010) that draw from two separate lines of contagion research: thermodynamics-based and epidemiological-based. We first perform sensitivity tests on each model in an evacuation simulation, ESCAPES, showing both models to be reasonably robust to parameter variations with certain exceptions. We then compare their ability to reproduce a real crowd panic scene in simulation, showing that the thermodynamics-style model (Bosse et al., European council on modeling and simulation, pp. 212–218, 2009) produces superior results due to the ill-suited contagion mechanism at the core of epidemiological models. We also identify that a graduated effect of fear and proximity-based contagion effects are key to producing the superior results. We then reproduce the methodology on a second video, showing that the same results hold, implying generality of the conclusions reached in the first scene.     

Discipline-based instruction to promote interdisciplinary design of wearable and pervasive computing products

This paper reports on a design experience for undergraduates in computer engineering, industrial design, and marketing that focuses on pervasive computing devices. Across a broad range of targeted application areas and user groups, many of the student designs have been wearable computers. Consequently, our course will be of interest to the wearable computing community, particularly in terms of our aim of bridging the gap between design and engineering. For the two most recent offerings of the course, we have utilized external observers and surveyed the students in order to validate the impact of aspects of our process and changes to it. This paper is based upon 5 years of experience and 2 years of analysis of our course, and it presents an overview of our process with both qualitative and quantitative results from these two most recent offerings.     

Linear actuation in coextruded dielectric elastomer tubes

Cylindrical fibre actuators have been constructed by a coextrusion method using a thermoplastic polyurethane wall and a conductive grease filler. These actuators may be operated as single fibres or bundled together as actuating ropes. Key results include the validation of Carpi’s wall pressure model [F. Carpi, D.D. Rossi, Dielectric elastomer cylindrical actuators: electromechanical modelling and experimental evaluation, Mater. Sci. Eng. C-Biomimetic Supramol. Syst. 24 (2004) 555–562] and the proof-of-concept demonstration of a technique that can be used for producing inexpensive dielectric elastomer actuators on an industrial scale.     

Highly Efficient Quasi 2D Blue Perovskite Electroluminescence Leveraging a Dual Ligand Composition

Perovskite light-emitting diodes (PeLEDs) are advancing because of their superior external quantum efficiencies (EQEs) and color purity. Still, additional work is needed for blue PeLEDs to achieve the same benchmarks as the other visible colors. This study demonstrates an extremely efficient blue PeLED with a 488 nm peak emission, a maximum luminance of 8600 cd m⁻², and a maximum EQE of 12.2% by incorporating the double-sided ethane-1,2-diammonium bromide (EDBr₂) ligand salt along with the long-chain ligand methylphenylammonium chloride (MeCl). The EDBr₂ successfully improves the interaction between 2D perovskite layers by reducing the weak van der Waals interaction and creating a Dion–Jacobson (DJ) structure. Whereas the pristine sample (without EDBr₂) is inhibited by small stacking number (n) 2D phases with nonradiative recombination regions that diminish the PeLED performance, adding EDBr₂ successfully enables better energy transfer from small n phases to larger n phases. As evidenced by photoluminescence (PL), scanning electron microscopy (SEM), and atomic force microscopy (AFM) characterization, EDBr₂ improves the morphology by reduction of pinholes and passivation of defects, subsequently improving the efficiencies and operational lifetimes of quasi-2D blue PeLEDs.     

Oral medication delivery in impaired swallowing: thickening liquid medications for safe swallowing alters dissolution characteristics

Acetaminophen (paracetamol) is available in a wide range of oral formulations designed to meet the needs of the population across the age-spectrum, but for people with impaired swallowing, i.e. dysphagia, both solid and liquid medications can be difficult to swallow without modification. The effect of a commercial polysaccharide thickener, designed to be added to fluids to promote safe swallowing by dysphagic patients, on rheology and acetaminophen dissolution was tested using crushed immediate-release tablets in water, effervescent tablets in water, elixir and suspension. The inclusion of the thickener, comprised of xanthan gum and maltodextrin, had a considerable impact on dissolution; acetaminophen release from modified medications reached 12–50% in 30?min, which did not reflect the pharmacopeia specification for immediate release preparations. Flow curves reflect the high zero-shear viscosity and the apparent yield stress of the thickened products. The weak gel nature, in combination with high G' values compared to G'' (viscoelasticity) and high apparent yield stress, impact drug release. The restriction on drug release from these formulations is not influenced by the theoretical state of the drug (dissolved or dispersed), and the approach typically used in clinical practice (mixing crushed tablets into pre-prepared thickened fluid) cannot be improved by altering the order of incorporation or mixing method.