FePO Catalysts for the Selective Oxidative Dehydrogenation of Isobutyric Acid into Methacrylic Acid

This review presents the iron phosphorus oxides used as catalysts for isobutyric acid oxidative dehydrogenation. Research on this catalytic system has been developed in the last decade and many publications have been devoted to this reaction, as it can be a step in a new process of production of methyl methacrylate. We emphasize particularly the nature of the active phase, the active centers, and the role of water and promoters. The mechanistic aspects of the reaction, which corresponds to an extension of the Mars and van Krevelen mechanism with a special role of water partial pressure, are discussed.     

Estimates of fracture density and uncertainties from well data

This paper aims at building a method to estimate the probability law governing the 3D fracture density of a fractured rock conditioned to the number of traces observed on a borehole image when the spatial distribution of fracture centers is assumed to follow a Poisson process. A closed-form expression of this law, allowing to calculate its mean value as well as a confidence interval, is derived in both cases of a lineic well (scanline) and a cylindrical well. The latter is better adapted to the situation of fracture size of the same order of magnitude as the well radius, which enables the presence of partial traces. In particular, the method takes into account the bias in the density estimate due to the fact that a fracture may cut the well along two distinct traces according to the considered fracture size. Monte Carlo simulations finally show a good agreement with the theoretical results of mean density and confidence interval.     

Modification of hydrophobic/hydrophilic properties of Vulcan XC72 carbon powder by grafting of trifluoromethylphenyl and phenylsulfonic acid groups

Carbon supports (glassy carbon and Vulcan XC72 powder) were modified by electrochemical and spontaneous grafting of phenylsulfonic acid (PSA) or trifluoromethylphenyl (TFMP) groups via diazonium ion reduction. The effectiveness of the grafting was confirmed electrochemically, by XPS measurements and elemental analyses. The hydrophobic or hydrophilic character of carbon surfaces was evidenced by measuring the contact angles of drops of different liquids (water, ethylene glycol and glycerol) in heptane. The surface energy was calculated and it was found, for example, that spontaneous grafting of a glassy carbon surface by PSA groups led to an increase by a factor 20 of the surface energy compared with an unmodified glassy carbon surface. The study of the grafting of such groups on XC72 carbon powder indicated that a very low grafting ratio (in wt%) led to a significant change in the macroscopic properties of the powder. Thermogravimetric analysis coupled with mass spectroscopy measurements (TGA-MS) showed that these grafted layers were thermally stable even in the presence of dispersed platinum nanoparticles. It was shown by cyclic voltammetry that the carbon substrate modification did not affect the electrochemical behavior of platinum catalyst, since the same active surface area was determined on Pt-XC72, Pt-PSA-XC72 and Pt-TFMP-XC72 catalysts.     

Relationships between processing conditions and mechanical properties of PA12 tubes. The EWF approach

In polyamide 12 (PA12) tube extrusion, calibration is the key step of the process that affects the subsequent mechanical properties. In previous work it has been shown that according to the calibration conditions, a very oriented skin layer may be created, which has been correlated to an important decrease of elongation at break. In this paper, we present new results showing a good correlation between molecular orientation and fracture toughness, as evaluated by the EWF (Essential Work of Fracture) approach. They concern notched specimens and confirm the results obtained in classical tensile testing. The specific essential work of fracture is very sensitive to the orientation generated in the skin region by appropriate processing conditions: it decreases from the external to the inner regions of the tube, and increases with skin orientation.     

Comparative Studies of the Superconducting Properties of Bi2Sr2CaCu2O8+δ and Bi1.7Pb0.3Sr2CaCu2O8+δ/Ag Random Composites

We report the results of the study of the resistive transition and the screening effect on similar random composites made of a silver matrix containing sintered superconducting grains of bismuth phase with two different stoichiometries. We show that most of the observed behaviors are compatible with a phenomenological approach in which the intergrain junctions behave as weak links whose the state depends strongly on temperature and field. We find that these links a much weaker in one of the series of samples.     

Semiclosed-Cell Mullite Foams: Preparation and Macro- and Micromechanical Characterization

The preparation and characterization of the properties of mullite ceramic foams suitable for diesel exhaust filtration systems are described. Two foams of different cell sizes, 32 and 61 ppi (pores per inch), were prepared from slurries by the replication process with polyurethane sponges as the templates. The microstructure and the dependence of the porosity and the mechanical properties on the preparation and resulting foam cell size and normalized density are discussed. In addition the micro- and macromechanical properties have been characterized using instrumented indentation techniques; with sharp (Berkovich) and small spherical-tipped indenters the hardness and modulus of the dense strut materials have been measured. The macroproperties have been measured with a large sapphire indenter, ∼5 mm radius using a load partial-unloading technique. The latter enables the modulus and the contact pressure versus penetration to be measured. These values are compared with traditional bulk measurements for crushing strength and elastic modulus. The results are discussed in terms of available theoretical treatments of the indentation of brittle porous materials.     

Micro-scale truss optimization using genetic algorithm

This paper describes the development of a genetic algorithm that is capable of optimizing the mass of micro-scale trusses. Belonging to the group of periodic cellular materials, micro-scale trusses are characterized by the creation of a base cell with a pattern that is repeated in space until a global structure is obtained. Investigation in this field has generally been focused on the design of base cells and their resistance once the final structure is obtained. In this project we have attempted to optimize each individual cell and in particular its elements according to the loads and boundary conditions applied to the global structure. With this objective, we defined a dichotomic search algorithm that establishes a set of cross-sectional areas suitable for the micro-scale truss, formulated the penalty coefficient for the over-sized elements, and studied the clones and rebirth process in order to avoid stagnation of the genetic algorithm. The cell elements used in this project were equal to or less than to 1 mm long, with a cross-sectional area in the order of 10^− 9 m².     

Stability of some stationary solutions to the forced KdV equation with one or two bumps

Free-surface flows past submerged obstacles in a channel are considered. The fluid is assumed to be inviscid and incompressible and the flow to be irrotational. The first-order approximation of long nonlinear surface waves over one or two bumps results in a forced Korteweg?Cde Vries (fKdV) equation. Solutions of the stationary fKdV equation are constructed and their stability is studied, either analytically or numerically. These various solutions include solitary waves over a single bump, solitary waves with two humps over a double bump, table-top solutions over a double bump and fronts.     

Impedance study of membrane dehydration and compression in proton exchange membrane fuel cells

Electrochemical impedance spectroscopy (EIS) is used to measure drying and rehydration in proton exchange membrane fuel cells running under load. The hysteresis between forward and backward acquisition of polarization curves is shown to be largely due to changes in the membrane resistance. Drying tests are carried out with hydrogen and simulated reformate (hydrogen and carbon dioxide), and quasi-periodic drying and rehydration conditions are studied. The membrane hydration state is clearly linked to the high-frequency arc in the impedance spectrum, which increases in size for dry conditions indicating an increase in membrane resistance. Changes in impedance spectra as external compression is applied to the cell assembly show that EIS can separate membrane and interfacial effects, and that changes in membrane resistance dominate. Reasons for the presence of a capacitance in parallel with the membrane resistance are discussed.