Computer-aided method for quantification of cartilage thickness and volume changes using MRI: validation study using a synthetic model

The primary objective of this study was to develop a computer-aided method for the quantification of three-dimensional (3-D) cartilage changes over time in knees with osteoarthritis (OA). We introduced a local coordinate system (LCS) for the femoral and tibial cartilage boundaries that provides a standardized representation of cartilage geometry, thickness, and volume. The LCS can be registered in different data sets from the same patient so that results can be directly compared. Cartilage boundaries are segmented from 3-D magnetic resonance (MR) slices with a semi-automated method and transformed into offset-maps, defined by the LCS. Volumes and thickness are computed from these offset-maps. Further anatomical labeling allows focal volumes to be evaluated in predefined subregions. The accuracy of the automated behavior of the method was assessed, without any human intervention, using realistic, synthetic 3-D MR images of a human knee. The error in thickness evaluation is lower than 0.12 mm for the tibia and femur. Cartilage volumes in anatomical subregions show a coefficient of variation ranging from 0.11% to 0.32%. This method improves noninvasive 3-D analysis of cartilage thickness and volume and is well suited for in vivo follow-up clinical studies of OA knees.     

High resolution processing techniques for ultrasound doppler velocimetry in the presence of colored noise. Part II: Multiplephase pipe-flow velocity measurement

For pt.I see ibid., vol.50, no.3, p.267-78 (2003). This paper presents an application of continuous wave ultrasound Doppler velocity measurements to two-phase flow in pipes. In many petroleum wells, the multiphase flow is separated into two phases: the first is a liquid phase and the second is a gas phase with small scatterers. The problem of multiphase velocity profile measurements has not been satisfactorily solved by classical approaches due to the multiphase nature of the fluid and the presence of colored noise, which introduces a significant bias in classical frequency estimators. We propose the use of resolution frequency techniques to overcome the classical limitations. Direct estimation of Doppler frequency then obtained using either time frequency maximum frequency or arguments of poles of the parametric model that identifies the Doppler part of the signal is discussed. The tests made with synthetic Doppler signals and two-phase flow have demonstrated the excellent performance of the high resolution techniques based on reassignment and parametric techniques.     

Polarization independence of a one-dimensional grating in conical mounting

We demonstrate theoretically a polarization-independent guided-mode resonant filter with only a one dimensional grating. A rigorous method, the modal method by Fourier expansion, is used to compute the diffracted efficiencies of the grating. Wave-vector analysis fails to correctly design a polarization-independent structure. We show that a rigorous analysis of the resonances must be employed to obtain such a device; using a pole approach, we study the effects of grating parameters on the resonances of both polarizations.     

High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.     

The MISTIGRI thermal infrared project: scientific objectives and mission specifications

This article presents the MISTIGRI project of a microsatellite developed by the French space agency Centre National d'Etudes Spatiales (CNES) in cooperation with Spain (Image Processing Laboratory of the University of Valencia and Centro para el Desarrollo Tecnológico Industrial (CDTI)). MISTIGRI is a mission that has the originality of combining a high spatial resolution (～50 m) with a daily revisit in the thermal infrared (TIR). MISTIGRI is an experimental mission devoted to demonstrate the potential of such TIR data for future operational missions. The scientific goals and expected applications of the mission are described: they encompass the monitoring of (i) agricultural areas and related hydrological processes, (ii) urban areas, and (iii) coastal areas and continental waters. Then, the specifications on spatial resolution, revisit frequency, overpass time, and spectral configuration are justified. The strategy of the mission is based on the combination with a network of long-term experimental sites. It will also make possible observing some areas facing rapid climatic change. The choice of the orbit is presented. Finally, we give rapid overviews of both the instrumental concept and the proposed mission architecture.     

Estimating forest canopy density of tropical mixed deciduous vegetation using Landsat data: a comparison of three classification approaches

Although a number of image classification approaches are available to estimate forest canopy density (FCD) using satellite data, assessment of their relative performances with tropical mixed deciduous vegetation is lacking. This study compared three image classification approaches – maximum likelihood classification (MLC), multiple linear regression (MLR) and FCD Mapper – in estimating the FCD of mixed deciduous forest in Myanmar. The application of MLC and MLR was based on spectral reflectance of vegetation, whereas FCD Mapper was operated on integrating the biophysical indices derived from the reflectance of the vegetation. The FCD was classified into four categories: closed canopy forest (CCF; FCD ≥ 70%), medium canopy forest (MCF; 40% ≥ FCD < 70%), open canopy forest (OCF; 10% ≥ FCD < 40%) and non-forest (NF; FCD < 10%). In the three classification approaches, producer's and user's accuracies were higher for more homogeneous vegetation such as NF and CCF than for heterogeneous vegetation density (VD) such as OCF and MCF. FCD Mapper produced the best overall accuracy and kappa coefficient. This study revealed that only spectral reflectance is not enough to get good results in estimating FCD in tropical mixed deciduous vegetation. This study indicates that FCD Mapper, an inexpensive approach because it requires only validation data and thus saves time, can be applied to monitor tropical mixed deciduous vegetation over time at lower cost than alternative methods.     

Use of hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs). Part 1. Influence of molecular weight and chemical modification of HTPI on the mechanical and thermal properties of PUs

New telechelic cis-1,4-polyisoprene oligomers bearing an hydroxyl group at the end of the polyisoprene backbone and possessing controlled molecular weights were used as soft segments in the elaboration of polyurethane elastomers. Besides, the well defined hydroxytelechelic cis-1,4-polyisoprene (HTPI) structure obtained through a controlled methodology, was chemically modified leading to hydrogenated and epoxidized oligomers based polyurethanes. The influence of the structural changes of these precursors on the polyurethanes properties have been studied. Thus, mechanical parameters as well as glass transition and mechanical transition temperature measurements indicated an increase in PUs hardness when the length of soft segment decreases and when the degree of epoxidized and hydrogenated isoprenic moieties increases. Moreover, based on thermogravimetric analysis (TGA), a linear relationship was established between the weight loss in the urethane stage degradation and the amount of hard segments in the PUs. Otherwise, the hydrogenated soft segments were found more thermally stable than the epoxidized and the non modified ones. By comparison with similar investigations developed from commercial oligodienes (PBHT R20 LM^® and EPOL^®), this study mainly showed that the PUs based on hydrogenated hydroxytelechelic cis-1,4-polyisoprenes were more thermally stable and softer than the EPOL^® based analogues.     

Extension of the FDTD Huygens subgridding to frequency dependent media

A wide range of wireless system developments require knowledge of the distribution of electromagnetic fields from various sources in humans. As experimental assessment is ethically unacceptable, high-resolution numerical dosimetry is needed. The finite-difference time-domain method is the most appropriate due to its simplicity and versatility. Reduction in demands on computational resources can be achieved using subgridding techniques. This paper rigorously introduces frequency dependency to one of the most promising subgridding techniques, Huygens subgridding. The validity of the Huygens surface in lossy media, as well as on the physical interface, is intensively studied.     

The geothermal area of the eastern border of the andes of north Argentina at Tucumán province

At the eastern border of the Andes there is an important thermal area which is known through surface phenomena and drilling. In this area thereis no vulcanism. The thermal phenomena are related to deep tectonic and magnatic activity. The studies of geothermometry carried on in the province of Tucumán (26^o–28^o lat. S) indicate deep temperatures higher than 200°C at several points. According to these data a geothermal field of economical interest may exist in this area.     

Photodétecteurs en intégration monolithique sur guides optiques : modélisation et vérifications expérimentales

The authors developed a model on optical guided structures with complex refractive indices, on 9 desktop-computer. This model allows to predict the coupling efficiency of photodetectors monolithically integrated with optical waveguides. An oscillatory behaviour of the absorption coefficient versus the absorbing layer thinkness has been pointed out. Comparisons with experimental resuylts obtained with device made in different laboratories show a good agrement