Antenne double C: un élément de tres petites dimensions

One can reduce dramatically the sizes of the planar antennas by introducing short-circuits in the structure of the antennas. In this paper, we present a miniaturized C-patch antenna excited by means of a coaxial probe. The antenna consists of two stacked C-shaped elements connected together with a vertical conducting plane. The antenna is designed on an air substrate and offers attractive dimensions, being five times lower than those of a conventional half wavelength microstrip patch antenna operating at the same frequency. Firstly, one presents the optimal geometry of the antenna and the results of the simulations which are compared with measurements in regard to the input impedance and radiation patterns. From this optimal configuration, a study parametric has been investigated for the all sizes of the antenna, in order to show the influence of each one on the resonance fre quency and the bandwidth. We will present also an application where this antenna is used in a proximity communication system between two computers.     

Stability of 8-hydroxyquinoline aluminum films encapsulated by a single Al2O3 barrier deposited by low temperature atomic layer deposition

100 nm thick 8‐AlQ₃ films deposited onto silicon wafers have been encapsulated by mean of low temperature atomic layer deposition of Al₂O₃ (20 nm). Investigation of the film evolution under storage test as harsh as 65 °C/85% RH has been investigated up to ~ 1000 h and no severe degradation could be noticed. The results have been compared to raw AlQ₃ films which deteriorate far faster in the same conditions. For that purpose, fluorescence measurements and atomic force microscopy have been used to monitor the film evolution while transmission electron microscopy has been used to image the interface between AlQ₃ and Al₂O₃. This concept of bilayer AlQ₃/Al₂O₃ barrier films has finally been tested as an encapsulation barrier onto an organic light-emitting diode.     

Theoretical study for safe and efficient energy transfer to deeply implanted devices using ultrasound

The goal of this paper is to prove that a safe and efficient energy transfer is possible between an external transducer located on the patient's skin and a device deeply implanted in the abdomen. An ultrasound propagation model based on the Rayleigh-Sommerfeld diffraction integral is coupled with the data from the Visible Human Project to account for the geometry of the organs in the body. The model is able to predict the amount of acoustic power received by the device for different acoustic paths. The acoustic model is validated by comparison with measurements in water and in heterogeneous liquid phantoms. Care is taken to minimize adverse bioeffects-mainly temperature rise and cavitation in tissues. Simulations based on the bio-heat transfer equation are performed to check that thermal effects are indeed small.     

A mass spectrometry method for quantitative and kinetic analysis of gas release from nuclear materials and its application to helium desorption from UO2 and fission gas release from irradiated fuel

A new system has been developed to determine absolute quantities of gas (mainly noble gases) released during thermal desorption in the range from 10^?12 to 10^?5 mol with a precision of few percent. The system is actually designed for simultaneous measurement of gaseous elements like He, Xe, Kr, thermally released from nuclear fuel samples and also allows the determination of the release kinetics as a function of time. This system, called Quantitative GAs MEasurement System (Q-GAMES), is based on the principle of collecting, purifying and spiking the sample gas in a “high-pressure” chamber, and continuous sampling of the gas for mass spectrometric analysis without sample depletion during the experiment. It is equipped with its own spike generator and with different gas purification systems. It is shown that this system fulfills the requirement to work with two existing very high-temperature gas desorption facilities for nuclear materials. This paper describes the Q-GAMES principle, the spiking system, its calibration, its operative mode, the different quantification techniques, as well as its technical data, in combination with some examples of typical application.     

Carbonic anhydrase inhibitors: design of membrane-impermeant copper(II) complexes of DTPA-, DOTA-, and TETA-tailed sulfonamides targeting the tumor-associated transmembrane isoform IX

The synthesis and carbonic anhydrase (CA, EC 4.2.1.1) inhibitory activity of two series of aromatic sulfonamides and their Cu(II) derivatives, incorporating metal-complexing moieties of the DTPA, DOTA, and TETA type are reported. The new compounds were designed in such a way as to possess high affinity for Cu(II) ions, exploiting four pendant carboxylate moieties in the DTPA derivatives, as well as the cyclen/cyclam macrocyles, and three pendant acetate moieties in the DOTA and TETA derivatives. The new derivatives showed modest inhibition of the cytosolic isoform CA I (K(I) values in the range of 66-2130 nM), were better CA II inhibitors (K(I) values in the range of 21-360 nM), and excellent inhibitors of the tumor-associated isoform CA IX (K(I) values in the range of 4.1-110 nM), with selectivity ratios for the inhibition of the tumor (CA IX) over the cytosolic (CA II) isozyme in the range of 10.74-20.88 for the best derivatives. Copper complexes were more inhibitory than the corresponding ligand sulfonamides, and showed membrane impermeability, thus, having the possibility to specifically target the transmembrane CA IX that has an extracellular active site. Incorporation of radioactive copper isotopes in this type of CA inhibitor may lead to interesting diagnostic/therapeutic applications for such compounds.     

Laser damage resistance of hafnia thin films deposited by electron beam deposition, reactive low voltage ion plating, and dual ion beam sputtering

A comparative study is made of the laser damage resistance of hafnia coatings deposited on fused silica substrates with different technologies: electron beam deposition (from Hf or HfO(2) starting material), reactive low voltage ion plating, and dual ion beam sputtering. The laser damage thresholds of these coatings are determined at 1064 and 355 nm using a nanosecond pulsed YAG laser and a one-on-one test procedure. The results are associated with a complete characterization of the samples: refractive index n measured by spectrophotometry, extinction coefficient k measured by photothermal deflection, and roughness measured by atomic force microscopy.     

Combined Effects of Baking Conditions and Bacterial α-Amylases on Staling Kinetics of Degassed and Porous Bread Crumb

Enzymes such as ??-amylase are extensively used to retard the staling process. Enzymes are acting both during fermentation and during baking. The objective of this work was to determine the relative action of ??-amylase during fermentation and during baking. The impact of the baking conditions (time, temperature) was also considered. To attain this aim, a degassed bread crumb was baked in a miniaturized system using two programs of baking: heating rates 10.27 and 6.88?°C/min corresponding to 180 and 220?°C baking temperatures, respectively. Mechanical and thermodynamic properties of the degassed crumb were assessed during aging of bread by determining the Young??s modulus E, the amount of freezable water, and the melting enthalpy of retrograded amylopectin. A first-order kinetic model was used to determine the different parameters of staling kinetics. Results showed that the hardening of crumb increased during storage. The kinetics were faster for samples baked with fast heating rate than for those baked with slow heating rates. The use of enzymes decreased the Young??s modulus but did not have any effect on the staling rate. Calorimetric analysis of the starch retrogradation showed a reduction of the amount of freezable water during storage with an increase of retrograded amylopectin. A comparison between mechanical properties of conventional crumb and of the degassed dough confirmed that experimental data fitted correctly the Gibson and Ashby??s model.     

Low response time context awareness through extensible parameter adaptation with ORCA

Ubiquitous computing applications or widespread robots interactions execute in unforeseen environments and need to adapt to changeful available services, user needs, and variations of the environment. Context-awareness ability addresses such a need, enabling, through adaptation rules, applications to react to the perceived dynamic variations. Responses to adaptation have to be quick enough to maximize the time during which the application is coherent with its environment. Adaptation rules, associating variations of the environment to application reactions, are usually established at design time. However, in unforeseen and partially anticipated environments, we claim that adaptation rules have to be dynamically extensible to match previously unexpected variations. Our approach enables rule composition and ensures a deterministic result. We propose to use parameter adaptation to quickly respond to environmental variations and dynamic compositional adaptation to provide extensibility to the parameter adaptation. To foster even lower response times, we internalize context-awareness processing and decision into the application.     

Segmentation of skin lesions in 2-D and 3-D ultrasound images using a spatially coherent generalized Rayleigh mixture model

This paper addresses the problem of jointly estimating the statistical distribution and segmenting lesions in multiple-tissue high-frequency skin ultrasound images. The distribution of multiple-tissue images is modeled as a spatially coherent finite mixture of heavy-tailed Rayleigh distributions. Spatial coherence inherent to biological tissues is modeled by enforcing local dependence between the mixture components. An original Bayesian algorithm combined with a Markov chain Monte Carlo method is then proposed to jointly estimate the mixture parameters and a label-vector associating each voxel to a tissue. More precisely, a hybrid Metropolis-within-Gibbs sampler is used to draw samples that are asymptotically distributed according to the posterior distribution of the Bayesian model. The Bayesian estimators of the model parameters are then computed from the generated samples. Simulation results are conducted on synthetic data to illustrate the performance of the proposed estimation strategy. The method is then successfully applied to the segmentation of in vivo skin tumors in high-frequency 2-D and 3-D ultrasound images.     

Does hemodiafiltration improve the removal of homocysteine?

High prevalence of hyperhomocysteinemia is common in hemodialysis (HD) patients and could contribute to worsen the cardiovascular risk. Beyond vitamin B status, dialysis modality itself could influence homocysteine (Hcy) levels. The objective was compare the reduction rate (RR) of Hcy and cysteine in stable dialyzed patients treated by standard HD or hemodiafiltration (HDF). Seventy‐five patients undergoing stable dialysis through standard high‐flux HD (n = 35) or HDF (n = 40) were included. Biological parameters were determined before and after a midweek dialysis session. Urea percent reduction per session and Kt/V index (K, body urea clearance, T, time of dialysis, and V, urea distribution volume), defined as a marker of dialysis efficacy, were similar between HD and HDF groups. By contrast, higher RR of beta2 microglobulin (β2m) was observed in HDF compared with HD (78.6 vs. 72.0%, respectively; P < 0.001). Likewise, higher RR of Hcy was obtained with HDF compared to HD (46.0 vs. 41.5%, respectively; P < 0.05), whereas the RR of cysteine was similar in both groups. Interestingly, a positive correlation between Hcy RR and urea Kt/V index was observed (r = 0.29, P < 0.05) and between Hcy RR and β2m RR (r = 0.45, P < 0.001). Time‐averaged concentration (TAC) of Hcy was lower with HDF compared with HD (17.8 vs. 19.1 μmol/L, respectively), although not significant. There was no difference in median Hcy according to dialysis modality for neither pre‐ nor postdialysis levels. Significant higher removal of Hcy was observed with HDF compared with standard HD, although urea Kt/V index was similar. Enhanced removal of middle molecules, such as β2m, could be involved in Hcy RR improvement with HDF.